ADC520 Series
BLACK AND WHITE SPECIALTY CAMERAS
www.americandynamics.net
Front side – Single sheet – Letter size – print 4/c
The ADC520 Series cameras feature a black and
white imager that delivers a sharp picture at a
very economical cost.
The ADC520 Series offers cameras in housings
different than your typical standard camera.
The ADC520D features a 3.5-inch discreet
dome housing that is an attractive alternative
to a standard camera.
The ADC521B features a low silhouette tube
design that will fit in with most decors.
The ADC522WP is a weather resistant tube
design that meets IP57 for weather resistance.
The built in IR illumination LEDs allow this
camera to produce a picture with 0 lux ambient
light. The 12 IR LEDs provide coverage up to
10 meters (30 ft) to deliver a sharp picture while
producing no visible light.
The ADC523PIR is a camera mounted in a
standard motion detector shell. The camera
blends in to the background appearing as a
security system device. People are unaware that
there is video surveillance in the area.
•
1/3-inch interline black
and white imager, EIA
format
•
380-line B/W imager
•
Sharp picture
•
0.5 lux light sensitivity
•
Sensitive to IR
illumination
•
Discreet housings
•
Automatic electronic
shutter
•
Automatic gain control
•
12 VDC input via
included power supply
•
ADC522WP includes IR
illumination and is
weather resistant
ADC520Series_VS280 3/1/04 4:01 PM Page 1
FEATURES
AMERICAN DYNAMICS ADC520 SERIES BLACK AND WHITE SPECIALTY CAMERAS
Product specifications and availability subject to
change without notice.
Certain product names mentioned herein may be trade
names and/or registered trademarks of other companies.
VS280-04 03/04 L
©2004 Sensormatic Electronics Corporation
Back side – Single sheet – Letter size – print b/w
Model Numbers
ADC520D . . . . . . . . . . . . . . . . . . . .B/W camera in 3.5-inch micro dome with
3.6 mm lens
ADC521B . . . . . . . . . . . . . . . . . . . .B/W camera in Bullet Housing with
3.6 mm lens and mount
ADC522WP . . . . . . . . . . . . . . . . . .B/W camera in weatherproof Bullet
Housing with 4.0 mm lens and IR
illuminators and mount
ADC523PIR . . . . . . . . . . . . . . . . . .B/W camera in non-functional PIR
detector housing with 3.6 mm lens
Operational
EIA Imager . . . . . . . . . . . . . . . . . . .Interline transfer 1/3-inch CCD
Video Output . . . . . . . . . . . . . . . . .1.0 Vp-p 75
Active Pixels Count . . . . . . . . . . . .510 (H), 492 (V)
Minimum Scene Illumination . .0.5 lux at F2.0
Horizontal Resolution . . . . . . . . .380 TVL
Light Compensation Modes . . .Auto electronic shutter
1/60 to 1/100,000
Synchronization Modes . . . . . . .Internal
Geometric Distortion . . . . . . . . .None
S/N Ratio . . . . . . . . . . . . . . . . . . . .-48 dB
Input Connectors
Input Power . . . . . . . . . . . . . . . . . .2.1 mm
Composite Video . . . . . . . . . . . . .BNC on cable
Electrical
Input Voltage . . . . . . . . . . . . . . . . .120VAC @ 60Hz
Power Supply Output . . . . . . . . .12VDC (±10%)
Power Consumption . . . . . . . . . .ADC520D 120 mA
ADC521B 120 mA
ADC522WP 120 mA
ADC523PIR 240 mA
Regulatory
Emissions . . . . . . . . . . . . . . . . . . . .FCC Part 15, Class B
ICES-003
Safety . . . . . . . . . . . . . . . . . . . . . . . .UL 1585 (power supply only)
Environmental
Operating Temperature . . . . . . . .-10º to 50º C (14º to 122º F)
Humidity . . . . . . . . . . . . . . . . . . . . .90% RH (non-condensing)
ADC522WP . . . . . . . . . . . . . . . . . .100% RH
Storage Temperature . . . . . . . . . .-30º to +60º C (-22º to 140º F)
Dimensions
Weight
Shipping Weight
Environmental
ADC520D
87 x 57 mm
3.4 x 2.2 in
(D x H)
.18 kg
.40 lbs
.43 kg
.90 lbs
Indoor Only
ADC521B
26 x 87 mm
1.02 x 3.4 in
(D x L)
.30 kg
.70 lbs
.55 kg
1.20 lbs
Indoor Only
ADC523PIR
70 x 110 x 49 mm
2.7 x 4.3 x 1.9 in
(W x H x D)
.18 kg
.40 lbs
.43 kg
.90 lbs
Indoor Only
ADC522WP
65 x 105 mm
2.5 x 4.1 in
(D x L)
.55 kg
1.20 lbs
.80 kg
1.80 lbs
IP57
Note: All ADC520 Series cameras ship with a 120 VAC to 12 VDC UL listed power supply with a 6 foot cord. 12 VDC
cameras will not line-lock and are not recommended to be used in a matrix switcher environment.
ADC520Series_VS280 3/1/04 4:01 PM Page 2