American Dynamics AD2032 Specsheet

FEATURES

The AD2096 Series Alarm Interface Unit converts sixty-four hardwire alarm inputs to AD alarm contact numbers for use by American Dynamics Matrix Switcher/Controller systems. The matrix switcher/controller systems can be programmed to automatically switch video inputs to video outputs, display presets, and activate auxiliary outputs in response to activated alarm inputs. A single Form C relay and LED indicate when any of the sixty-four alarm contacts are activated. DIP switches are used to select alarm input groups (in blocks of sixty-four), to set acceptance of normally-open or normally-closed alarms (in groups of eight), and to set the baud rate of the RS-232 link. Multiple units can be cascaded on a single RS-232 system port. The universal mount enables the unit to be mounted to the front or rear of equipment racks, or flat on a wall or horizontal surface.

The AD2032 Series Alarm Responder provides thirty-two addressable double pole Form A relays arranged in two groups of sixteen. The Alarm Responder provides relay contact closures for corresponding video outputs that are displaying alarm actions. Each relay group can be programmed to respond to two separate groups of sixteen contiguous video outputs. Relays can activate VCRs, annunciators, or other external alarm associated devices. The unit is used with MegaPower™ Series Matrix Switcher/Controller Systems via High Speed Data Line or AD Manchester code line. The universal mount enables the unit to be mounted to the front or rear of equipment racks, or flat on a wall or horizontal surface.

AD2096 and AD2032 Series

ALARM ACCESSORIES

AD2096 Series Alarm Interface Unit

•

Input of 64 hard-wired alarms

•

Multiple units cascadable on a single RS-232 link

•

Enables the system to automatically respond to external inputs

•

Diagnostic LEDs

•

Alarm presence indication

•

Provides single relay output

•

Universal wall, surface, or rack mount

AD2032 Series Alarm Responder

•

Activates relays that correspond to video outputs in alarm

•

32 addressable Form-A relays

•

Relays can activate VCRs, annunciators, or other external alarm devices

•

Diagnostic LEDs

•

Universal wall, surface, or rack mount

www.americandynamics.net

SPECIFICATIONS

Model Numbers

AD2096A . . . . . . . . . . . . . . . . . . . . .Alarm Interface Unit,120 VAC, 50/60 Hz

AD2096-1 . . . . . . . . . . . . . . . . . . . .Alarm Interface Unit, 230 VAC, 50/60 Hz

AD2032 . . . . . . . . . . . . . . . . . . . . . .Alarm Responder, 120 VAC, 50/60 Hz

AD2032-1 . . . . . . . . . . . . . . . . . . . .Alarm Responder, 230 VAC, 50/60 Hz

Operational (Alarm Interface Unit)

Alarm Inputs . . . . . . . . . . . . . . . . .64 contact closures (closures to ground or

0 V to 5 V logic levels), N/O or N/C,

Programmable in blocks of 8

Address Range . . . . . . . . . . . . . . . .16 blocks of 64 for maximum of 1024

Alarm Outputs . . . . . . . . . . . . . . .RS-232 RJ-45 direct connection to system

CPU

Alarm Indication . . . . . . . . . . . . . .LED, and Form-C relay outputs

LEDs . . . . . . . . . . . . . . . . . . . . . . . . .Power and alarm

Operational (Alarm Responder)

Alarm Outputs . . . . . . . . . . . . . . .32 Form-A relays, 2 groups of 16 outputs

Address Range . . . . . . . . . . . . . . . .Blocks of 16

LEDs . . . . . . . . . . . . . . . . . . . . . . . . .Power and data

Matrix Switcher . . . . . . . . . . . . . . .AD High Speed Data Line or Manchester

code connection

Connectors (Alarm Interface Unit)

RS-232 . . . . . . . . . . . . . . . . . . . . . . .RJ-45 in/out, cascadable

Alarm Inputs . . . . . . . . . . . . . . . . .Eleven 12-pin removable screw terminals

Connectors (Alarm Responder)

AD High Speed Data Line . . . . .BNC, in/out

AD Manchester Code . . . . . . . . . .One 12-pin removable screw terminal

Alarm Output . . . . . . . . . . . . . . . .Eight 12-pin removable screw terminals

Electrical

Supply Voltage

AD2096A, AD2032 . . . . . . . . .120 VAC, 50/60 Hz

AD2096-1, AD2032-1 . . . . . . .230 VAC, 50/60 Hz

Power . . . . . . . . . . . . . . . . . . . . . . . .8 watts (nominal)

Mechanical

Mounting . . . . . . . . . . . . . . . . . . . .Universal wall, surface, and rack mount

(19-inch EIA)

Dimensions (H x W x D) . . . . . . .89 x 483 x 203 mm

(3.5 x 19 x 8 in)

Unit Weight . . . . . . . . . . . . . . . . . .4.5 kg (10 lbs)

Shipping Weight . . . . . . . . . . . . . .4.5 kg (10 lbs)

Environmental

Operating Temperature . . . . . . . .0°to 40°C (32° to 104° F)

Storage Temperature . . . . . . . . . .-40°to 70° C (-40° to 155°F)

Humidity . . . . . . . . . . . . . . . . . . . . .98% RH (non-condensing)

Regulatory

Immunity . . . . . . . . . . . . . . . . . . . .EN50130-4

Safety . . . . . . . . . . . . . . . . . . . . . . . .UL2044

Compatible Matrix Switcher/Controller Systems

MegaPower 1024 Series MegaPower 168 Series MegaPower 48 Series AD2150 Series

Basic System Diagram

AMERICAN DYNAMICS AD2096 AND AD2032 SERIES ALARM ACCESSORIES

VS289-02 01/03 L

Product specifications and availability subject to change without notice. Certain product names mentioned herein may be trade names and/or registered trademarks of other companies.

ENTER AUXILIARY

IRIS

FOCUS

ZOOM

CAMERAMONITORSTATUS PRESET

AD2096 Series

Matrix Switcher/Controller

VCR

DVR

AD2032 Series

RS-232 Lines

High Speed Data Line

Control Code Line

Monitor Displaying Alarm Camera

AD2088 Operator Keyboard

Alarm Contact Activated By Open Door