American Dryer Corp AD-76 User Manual

AD-76 Aquatex

Parts Manual

1995 thru 1999

American Dryer Corporation

88 Currant Road

Fall River, MA 02720-4781

T elephone: [phone] / Fax: [phone]

e-mail: techsupport@amdry .com

060899/DX/cms

ADC Part No. 450197

Retain This Manual In A Safe Place For Future Reference

American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this

product is properly maintained, it will provide many years of safe, efficient, and trouble-free operation.

ONLY properly licensed technicians should service this equipment.

OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation/operator's
manual included with the dryer.

WARNING:

WARNING: The dryer must never be operated with any of the back guards, outer tops, or

We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the
right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material,
and to change or discontinue models.

UNDER NO CIRCUMSTANCES should the door switch or the heat circuit devices
ever be disabled.

service panels removed. PERSONAL INJURY or FIRE COULD RESULT.

Important

For your convenience, log the following information:

DATE OF PURCHAS E MODEL NO.

DIS TRI BUT ORS N AME

Serial Number(s)

AD-76 Aquatex

Replacement parts can be obtained from your distributor or the ADC factory . When ordering replacement parts
from the factory, you can FAX your order to ADC at [phone] or telephone your orders directly to the
ADC Parts Department at [phone]. Please specify the dryer model number and serial number in
addition to the description and part number, so that your order is processed accurately and promptly.

The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a
composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.

“IMPORT ANT NOTE TO PURCHASER”

Information must be obtained from your local gas supplier on the instructions
to be followed if the user smells gas. These instructions must be posted in a
prominent location near the dryer .

Table of Contents

DROP LINT DOOR ASSEMBLY .............................................................................................. 2

HIGH SECURITY CONTROL DOOR ASSEMBLY.......................................................................... 3

M

ICROPROCESSOR CONTROL PANEL ASSEMBLY ...................................................................... 4

FRONT PANEL ASSEMBLY ................................................................................................... 5

MAIN DOOR SWITCH HOUSING ........................................................................................... 6

AIN DOOR ASSEMBLY ...................................................................................................... 7

M

LINT TRAP ASSEMBLY........................................................................................................ 8

B

ASKET (TUMBLER)/SUPPORT ASSEMBLY.............................................................................. 9

TUMBLER BEARING ASSEMBLY........................................................................................... 10

IDLER BEARING ASSEMBLY ................................................................................................ 11

TOTALLY ENCLOSED, FAN-COOLED MOTOR MOUNT ASEMBLY........................................ 12, 13

TUMBLER HI-LIMIT SENSOR BRACKET ............................................................................... 14

HUMIDITY TRANSMITTER ASSEMBLY .................................................................................. 15

ELECTRIC OVEN ASSEMBLY ......................................................................................... 16, 17

SAIL SWITCH/HIGH LIMIT ASSEMBLIES .............................................................................. 18

BURNER BOX/GAS & L.P ................................................................................................ 19

REAR ELECTRIC PANEL ASSEMBLY 115V GAS ................................................................... 20

REAR ELECTRIC PANEL ASSEMBLY 208-240V GAS ............................................................ 21

REAR ELECTRIC PANEL ASSEMBLY 208-240V ELECTRIC ...................................................... 22

REAR ELECTRIC PANEL ASSEMBLY 416V ELECTRIC ............................................................. 23

DISCONNECT PANEL ASSEMBL Y 1 15V GAS ........................................................................ 24

DISCONNECT PANEL ASSEMBLY 208-240V GAS ................................................................. 25

DISCONNECT PANEL COVER GAS ....................................................................................... 26

MAIN ELECTRICAL DISCONNECT/AIR FIL TER ASSEMBLY ELECTRIC .......................................... 27

REAR VIEW ELECTRIC ...................................................................................................... 28

REAR VEIW GAS ............................................................................................................ 29

REAR & TOP PANEL ASSEMBLY GAS ................................................................................ 30

REAR & TOP PANEL ASSEMBLY ELECTRIC ......................................................................... 31

ELECTRIC OVEN COMPONENT APPLICATION CHART.............................................................. 32

ADDITIONAL PAR TS AVAILABLE......................................................................................... 33

2

Drop Lint Door Assembly

Illus. No. Part No. Qty. Description

1 800150 1 Knob Latch Kit Assembly (includes illus. nos.1 and 2)

160200 1 Knob Latch ONL Y with 2 Screws (without cam)
160003 1 Dummy Lock ONL Y

2 160008 1 Lock Cam for AD-100 and Dummy Lock

160009 1 Knob Latch Adjustable Cam ONLY
150425 1 #12-24 x 3/8" Round Head Machine Screw ONL Y

(screw for Knob Latch Adjustable Cam)
3 157000 1 Drop Lint Door Spring
4 881318 1 AD-76AQ Insulated Drop Lint Door Assembly

(includes illus. nos. 4 through 8)

881317 1 AD-76AQ Stainless Steel Insulated Drop Lint Door Assembly

(includes illus. nos. 4 through 8)
5 150201 6 # 10-32 x 1/3" Phillips Pan Head TEK Screw
6 117604 7 Neoprene Sponge Tape (sold by the foot)
7 117603 3 Sponge Tape / Gasket (sold by the foot)

for models mfd. as of February 8, 1995

102307 3 Trim Bumper Gasket (sold by the foot)

for models mfd. prior to February 8, 1995
8 180212 1 Mid Trim / Kick Plate - Gray (38-1/4" length)
9 150419 2 # 6 x 1/2" T amper Proof TEK Screw
10 108120 1 Chain for Drop Lint Door (10-1/2" length)
— 150418 1 Tamper Proof Screw Hand Driver

* Specify color when ordering.

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

High Security Control Door Assembly

Illus. No. Part No. Qty. Description

3

1 160017 1 Special Dummy Lock Only

160104 1 Lock Cam ONL Y

2 160016 1 Lock Cam ONL Y
3 881053 1 ADC Logo with T ape
4 881315* 1 AD-76AQ Control Door Assembly

(includes illus. nos. 4 through 7)

881316* 1 AD-76AQ Stainless Steel Control Door Assembly

(includes illus. nos. 4 through 7)
5 180202 1 AD-76AQ T op Trim S trip (Gray) with Lock Hole (38-1/4" length)
6 117603 3 Sponge Tape / Gasket (sold by the foot)
7 150201 6 # 10-32 x 1/4" Phillips Round Head Machine Screw
8 150415 4 # 10-32 x 1/2" Phillips Round Head Crimptite Screw
9 102600 1 Control Door Rod Support Catch
10 102600 1 Control Rod Retainer Clip
11 102502 1 Control Door Support Rod
12 122641 1 15 Pin Microprocessor Connector
13 122706 ** Sockets
14 153000 2 #10 x 1/2" Hex Head Machine Screw
15 319754 1 Bracket
16 152001 1 8-32 Hex Nut
17 153018 1 #8 Internal Star W asher
18 121488 1 3/8" Rubber Cushioned Clamp
19 136989 1 Humidity Sensor Assembly

* Specify color when ordering.
** As required

Telephone: [phone] Fax: [phone]

4

Microprocessor Control Panel Assembly

Illus. No. Part No. Qty. Description

1 112535 1 OPL English Keyboard Label Assembly
2 801255 1 Phase 5 Microprocessor Control Panel Only

881319 1 Aquatex Microprocessor Control Panel Assembly Complete

(includes illus. nos. 1 through 6)
3 137108 1 Aquatex Microprocessor Board
4 153010 2 # 6 Star Washer
5 150005 2 # 6-32 x 1/4" Phillips Round Head Machine Screw
6 150415 1 # 10-16 x 1/2" Phillips Round Head Crimptite Screw

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Front Panel Assembly

5

Illus. No. Part No. Qty. Description

1 881326* 1 Left Hand Front Panel (includes illus. nos. 1 through 3, 5)

881327* 1 Stainless Steel Left Hand Front Panel (includes illus. nos. 1, 2, 3, 5)
2 154215 2 5/32" Pop Rivet
3 170330 1 Friction Door Latch
4 150415 8 #10-16 x 1/2" Phillips Round Head Crimptite Screw
5 121405 1 Rubber Grommet
6 122351 1 Large E-Stop Twist & Lock Operator
7 122419 1 "Emergency Stop" Label
8 132395 1 N.C. Contact Block w/Base

* Specify color when ordering.

Telephone: [phone] Fax: [phone]

6

Main Door Switch Housing

Illus. No. Part No. Qty. Description

1 152013 2 # 6-32 Hex Nut
2 153008 2 # 6 Lock Washer
3 137005 1 Single Pole Door Switch
4 121028 2 Insulated Female T erminal
5 154281 2 3/8" Standard Nylon Spacers
6 800448 1 12 1/2" Stainless Steel Main Door Hinge Assembly

(includes illus. nos. 6 and 7)
7 153565 2 # 6-32 x 1" Self Clinching Stud
8 313218 1 Main Door Switch Housing
9 150201 2 # 10-32 x 1/4" Phillips Pan Head Screw
10 121405 1 Rubber Grommet

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Main Door Assembly

7

Illus. No. Part No. Qty. Description

1 800285 1 Gray Main Door Assembly Complete

(includes illus. nos. 1,5,6 and 7)
2 800448 1 12 1/2" Stainless Steel Main Door Hinge Assembly
3 150410 4 # 10-24 X 3/8" Phillips Pan Head Taptite Screw
4 152014 4 1/4-20 Free Spin Wash Nut
5 102353 1 69 1/2" Main Door Gasket
6 102210 1 20 7/16" Door Glass

170730 1 Glass Adhesive for Lightweight (plastic) Main Door Assembly

(10.3 oz cartridge)
7 150431 1 Main Door Latch Screw (#10 x 7/16" Dome Hex Head Screw)

Telephone: [phone] Fax: [phone]

8

Lint Trap Assembly

Illus. No. Part No. Qty. Description

1 800420 1 AD-76AQ Lint Trap Assembly Complete

(includes illus. nos. 1,3,4 and 5)

800421 1 AD-76AQ Lint Trap Only
2 154200 7 5/32" Pop Rivet
3 304101 1 Lint Screen Holder
4 150300 2 # 10 x 1/2" Hex W asher TEK Screw
5 800506 1 Lint Screen
6 150419 2 # 6 x 1/2" T amperproof TEK Screw
7 108120 1 Chain for Drop Lint Door (10-1/2" length)
— 150418 1 Tamperproof Screw Hand Driver

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Basket (Tumbler) / Support Assembly

9

Illus. No. Part No. Qty. Description

1 800708 1 AD-76AQ Basket (Tumbler) ONL Y without Felt Collar

800857 1 AD-76AQ Stainless Steel Basket (T umbler) ONL Y

without Felt Collar

800816* 1 AD-76AQ (1-3/4") Basket (Tumbler) and Support

Assembly Complete (includes illus. nos. 1 through 10)

800873* 1 AD-76AQ Stainless Steel (1-3/4") Basket

(Tumbler) and Support Assembly Complete

(includes illus. nos. 1 through 10)
2 150415 40 # 10-16 x 1/2" Phillips Round Head Crimptite Screw
3 301308 4 AD-76AQ Basket (Tumbler) Rib ONL Y
4 301408 4 AD-76AQ Stainless Steel Basket (T umbler) Rib ONL Y

150500 1 # 5/16-18 x 3/4" Socket Button Head Screw
5 100905 4 # 3/8-16 x 37" T ie Rod
6 153004 4 3/8" Flat W asher
7 800613 1 AD-76AQ (1-3/4'") Basket (Tumbler)

Support ONL Y
8 152005 4 3/8" Hex Nut
9 153005 4 3/8" Lock W asher
10 153004 4 3/8" Flat W asher
11 116000 1 Felt Collar ONL Y
— 401010 1 # 847 A dhesiv e for F elt Col lar

Telephone: [phone] Fax: [phone]

10

Tumbler Bearing Assembly

Illus. No. Part No. Qty. Description

1 880220 1 1-3/4" Flange Bearing
2 153025 4 9/16" Lock Washer
3 152050 4 #9/16-12 Hex Nut
4 150508 2 #3/8-16 x 3/4" Hex Head Machine Bolt
5 153005 2 3/8" Lock Washer
6 152005 2 #3/8-16 Hex Nut
7 150600 2 #3/8-16 x 1-1/2" Hex Head Machine Bolt
8 153004 * 3/8" Flat Washer
9 153005 2 3/8" Lock Washer
10 152005 2 #3/8-16 Hex Nut
11 150501 4 #5/16-18 x 3/4" Hex Head Machine Bolt
12 153002 4 5/16" Lock Washer
13 153001 4 5/16" Flat Washer
14 150621 2 #5/16-18 x 1-1/2" Hex Head Machine Bolt
15 152004 2 #5/16-18 Hex Nut
16 8 0 1 10 1 1 1-3/8" Bearing Box Assembly Complete (includes illus. nos. 4 through 20)

80 1103 1 1-3/8" Bearing Box and Support ONLY

(includes illus. nos. 4 through 6, 16 and 17)

80 1105 1 1-3/8" Bearing Box ONLY
17 8 0 1 1 04 1 Pillow Block Bearing Support ONL Y
18 880202 1 1-3/8" Pillow Block Bearing ONL Y
19 152004 2 #5/16-18 Hex Nut
20 150610 2 #5/16-18 x 1-1/2" Allen Set Screw
21 10 11 00 1 18" Pulley
22 154301 2 #5/16-18 x 5/16" Allen Set Screw
23 100713 1 1/4" x 1/4" x 7/8" Key
24 100106 1 5L 690 "V" Belt (to idler assembly)

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Idler Bearing Assembly

11

Illus. No. Part No. Qty. Description

1 100106 1 5L 690 "V" Belt (idler to basket [tumbler])
2 101140 1 14" x 3" Compound Pulley
3 100117 1 4L 620 "V" Belt (idler to motor)
4 154301 2 #5/16-18 x 5/16" Allen Set Screw
5 100705 1 3/16'" x 3/16" x 1-3/8" Key
6 301850 1 5/8" x 3/4" Idler Shaft
7 150529 3 #1/4-20 x 2 -1/4" Carriage Bolt
8 100214 2 5/8" Flange Bearing
9 153007 3 1/4" Lock W asher
10 152002 3 #1/4-20 Hex Nut
11 801007 1 Idler Bearing Assembly Complete

(includes illus. nos. 5 through 7)
12 150617 2 #3/8-16 x 1" Hex Head Machine Bolt
13 153005 2 3/8" Lock W asher
14 153004 2 3/8" Flat W asher
15 801009 1 Idler Square W asher
16 152004 1 #5/16-18 Hex Nut
17 150509 1 #5-16-18 x 3" Hex Head Machine Bolt

Telephone: [phone] Fax: [phone]

12

T otally Enclosed, Fan-Cooled Motor Mount Assembly

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

T otally Enclosed, Fan-Cooled Motor Mount Assembly

Illus. No. Part No. Qty. Description

1 100117 1 4L 620 "V" Belt (to idler assembly)
2 100701 1 3/16" x 3/16" x 1" Key
3 101133 1 5/8" x 2-1/4" Motor Pulley (60 Hz ONL Y)

101130 1 5/8" x 2-1/2" Motor Pulley (50 Hz ONL Y)
4 150501 4 5/16-18 x 3/4" Hex Head Machine Bolt
5 153002 4 5/16" Lock W asher
6 153001 4 5/16" Flat W asher
7 100073 1 1 HP 1 15/208/230V /1Ø/ 60Hz T .E.F.C. Motor

with Plug (56Z Frame)

8 122701 8 Socket T erminal

122801 1 Pin/Socket Extraction T ool
9 137030 1 8-P in Fe male Housing Connector
10 152004 4 #5/16-18 Hex Nut
11 153002 4 5/16" Lock W asher
12 153001 4 5/16" Flat W asher
13 117604 4 Neoprene Sponge Tape (sold by the foot)
14 154000 4 #5/16-18 Tinnerman Nut
15 800919 1 AD-75AQ Motor Mount ONL Y (56Z Frame)

803992* 1 1 HP 1 15/230V 60HZ 1Ø T .E.F .C. Motor Mount Assembly w/Plug

Complete (includes illus. nos. 2 through 7 and 13 through 20)

803953 1 3/4 HP 230V 50Hz 1Ø T .E.F.C. Motor Mount

Assembly Complete (includes illus. nos. 2 through 6 and 13 through 22)

803955* 1 1 HP 230/380/460V 60Hz 3Ø T.E.F .C. Motor

Mount Assembly Complete
(includes illus. nos. 2 through 7 and 13 through 20)

803958* 1 1 HP 230/380/460V 50HZ 3Ø T.E.F .C. Motor

Mount Assembly Complete

(includes illus. nos. 2 through 7 and 13 through 20)
16 153051 1 3/4" Flat W asher
17 100603 1 16" Impellor with 3/4" Bore
18 100714 1 3/16" x 3/16" x 1-7/8" Key
19 153050 2 1/8" Flat W asher
20 152006 2 #1/2-12 Left Hand Jam Nut
21 120200 1 3/8" 90° Connector
22 100075* 1 1 HP 230/460/220/380V 50/60Hz 3Ø T .E.F.C. Motor

100076* 1 3/4 HP 240V 1Ø T .E.F.C. Motor 56Z Frame (50Hz ONL Y)

13

*Specify voltage when ordering.

Telephone: [phone] Fax: [phone]

14

Tumbler Hi-Limit Sensor Bracket

Illus. No. Part No. Qty. Description

1 305007 1 Universal Sensor Bracket
2 130301 1 L225 Hi-Limit Thermostat Manual Reset
3 153010 2 #6 Star W asher
4 152000 2 #6-32 Hex Nut
5 881354 2 Aquatex Microprocessor Sensor Bracket Harness
6 150005 2 #6-32 X 1/4" Phillips Round Head Machine Screw

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Humidity Transmitter Assembly

15

Illus. No. Part No. Qty. Description

1 851155 1 Humidity Controller Mounting Bracket
2 319741 1 Humidity Bracket Cover
3 151001 1 #8-32 Pal Nut
4 136989 2 Humidity Sensor Board with Filter
5 150020 4 #4-40 Screw
6 153032 4 #4 Nylon Washer
7 121401 2 Rubber Grommet
8 117602 A/ R 1/4T Neoprene Sponge T ape
9 117603 A/ R 1/8T Noise Supressor T ape

Telephone: [phone] Fax: [phone]

16

Electric Oven Assembly

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Electric Oven Assembly

Illus. No. Part No. Qty. Description

1 851151 1 Aquatex Oven Box ONL Y

830210 1 Electric Oven Assembly Complete (416V)
2 120013 – Heating Element
3 150300 2 #10 x 1/2" Hex W asher TEK Screw
4 802800 1 Sail Switch Box with Bracket and Cover ONL Y

802801 1 Sail Switch Assembly Complete

(includes illus. nos. 4 through 12)
5 154004 1 Twin Speed Nut
6 150415 2 #10-16 x 1/2" Phillips Round Head Crimptite Screw
7 802799 1 Sail Switch Box Cover and Bracket ONL Y
8 122200 1 Sail Switch ONL Y
9 150303 2 #4 x 3/4" Pan Head Machine Screw
10 105500 1 Sail Switch Actuator Rod
11 319202 1 Sail Switch Damper (flat)
12 154002 1 1/8" Push on Fastener
13 150300 2 #10 x 1/2" Hex W asher TEK Screw
14 803100 1 Electric Oven Front Cover ONL Y
15 130400 1 L-290 Hi Limit Thermostat
16 150300 2 #10 x 1/2" Hex W asher TEK Screw
17 152008 – #10-32 Hex Nut (4 per element)
18 153009 – #10 Star W asher
19 121010 – Terminal Lug
20 121011 13' Bus Bar (sold by the foot)
21 152008 – #10-32 Hex Nut
22 120080 – External Ceramic Insulator (2 per element)
23 120081 – Internal Ceramic Insulator (2 per element)
24 829016 1 Aquatex T emperature Sensor Assembly
25 150300 1 #10 x 1/2 Hex W asher Head TEK Screw

17

* Refer to Electric Oven Component Application Chart on page 32.

Telephone: [phone] Fax: [phone]

18

Sail Switch / High Limit Assemblies

Illus. No. Part No. Qty. Description

1 154004 1 Twin Speed Nut
2 150415 2 #10-16 x 1/2" Phillips Round Head Crimptite Screw
3 802799 1 Sail Switch Box Cover and Bracket ONL Y
4 150303 2 #4 x 3/4" Pan Head Machine Screw
5 122200 1 Sail Switch ONL Y
6 105500 1 Sail Switch Actuator Rod
7 319202 1 Sail Switch Damper (flat)
8 154002 1 1/8" Push-On Fastener
9 802800 1 Sail Switch Box with Cover and Bracket ONL Y

802801 1 Sail Switch Assembly Complete

(includes illus. nos. 1 through 8)
10 824534 1 ADG 50/75 Aquatex Sail Switch Harness (Gas ONLY)
11 143000 1 3/4" to 1/2" Reducing Coupling
12 142809 1 1/2" x 29-1/8" Pipe
13 318700 2 Pipe Bracket
14 150415 2 #10-16 x 1/2" Phillips Round Head Crimptite Screw
15 150415 2 #10-16 x 1/2" Phillips Round Head Crimptite Screw
16 824533 1 Hi-Limit Harness
17 319704 1 Hi-limit Mounting Bracket
18 150001 2 #6-32 x 1/2" Round Head Machine Screw
19 130401 1 L-330 Hi Limit Thermostat
20 151000 2 #6-32 Pal Nut

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Burner Box Assembly / Gas & L.P .

19

Illus. No. Part No. Qty. Description

1 150415 2 #10-16 x 1/2" Phillips Round Head Crimptite Screw
2 150300 2 #10 x 1/2" Hex W asher TEK Screw
3 141105 4 Large Burner T ube
4 128915 1 DSI Ignitor/Flame Probe Assembly
5 150103 4 #8-32 x 3/4" Round Head Machine Screw
6 153000 4 #8 Steel Bur
7 802240 1 DSI Burner Shield (4-Tube Burner)
8 151001 4 #8-32 Pal Nut
9 140820 4 Burner Orifice #29 (for Natural Gas)

140805 4 Burner Orifice #47 (for Liquid Propane)
10 150415 2 #10-16 x 1/2" Phillips Round Head Crimptite Screw
11 802237 1 Burner Box W eldment
12 318700 2 Pipe Bracket (Bent)
13 142809 1 1/2" x 29-1/8" Pipe
14 141210 1 3/4" DSI Manifold (4-Port)
15 323737 1 Pipe Bracket
16 150300 2 #10 x 1/2" Hex W asher TEK Screw
17* 128927 1 24VAC Gas V alve (Natural Gas)

880960 1 1/2" 24V L.P . (Liquid Propane) Gas V alve Assembly

140411 1 LP Gas Conversion Kit #2
18 881367 1 1/2" Union Shutoff W ith T ail Peice
19 150299 4 #10 x 1" Hex W asher TEK Screw
20 880330 1 DSI Ignitor HV W ire/Connector ONL Y
21 880815 1 DSI Module ONL Y 50/60Hz
22 829016 1 Aquatex T emperature Sensor Assembly
23 150300 1 #10-1/2" Hex W asher Head TEK Screw

Telephone: [phone] Fax: [phone]

20

Rear Electric Panel Assembly 1 15V Gas

Illus. No. Part No. Qty. Description

1 132451 1 Double Pole Contactor
2 137060 1 Arc Suppressor Board
3 137013 4 PC Board Mounting Standoff
4 120765 1 Standard End Stop
5 120766 1 Small End Section
6 150301 2 #8-18 x 7/16" Phillips Pan Head TEK Screw
7 136019 1 5 x 20mm 1.0 Amp Fuse
8 136017 1 5 x 20mm 3.15 Amp Fuse
9 136103 2 5 x 20mm Fuse Holder
10 120758 2 Feed Through Terminal Block
11 120995 2 Bus Bar Screws
12 120994 1 Bus Bar
13 829037 1 Transformer with Terminals
14 319757 1 Bottom Panel

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Rear Electrical Panel Assembly 208-240V Gas

21

Illus. No. Part No. Qty. Description

1 132451 1 Double Pole Contactor
2 137060 1 Arc Suppressor Board
3 137013 4 PC Board Mounting Standoff
4 120765 1 Standard End Stop
5 120766 1 Small End Section
6 150301 2 #8-18 x 7/16" Phillips Pan Head TEK Screw
7 136019 1 5 x 20mm 1.0 Amp Fuse
8 136017 1 5 x 20mm 3.15 Amp Fuse
9 136103 2 5 x 20mm Fuse Holder
10 120758 2 Feed Through T erminal Block
11 120995 2 Bus Bar Screws
12 120994 1 Bus Bar
13 829042 1 Transformer with Terminals
14 319757 1 Bottom Panel

Telephone: [phone] Fax: [phone]

22

Rear Electrical Panel Assembly 208-240V Electric

Illus. No. Part No. Qty. Description

1 851157 1 CE Electrical Panel
2 132486 1 Power Disconnect
3 131369 1 Oven Contactor (for 208-240V)
4 132451 1 Blower Motor Contactor
5 120994 1 Bus Bar
6 137060 1 Arc Suppressor Board
7 829042 1 Transformer with Terminals (for 208-240V)
8 120995 2 Bus Bar Screws
9 136103 2 5 x 20mm Fuse Holder
10 120765 1 Standard End Stop
11 137013 4 PC Board Mounting Standoff
12 153012 3 #8 Star Washer
13 152001 3 8/32 Hex Nut
14 120766 1 Small End Section
15 136019 1 5 x 20mm 1.0 Amp Fuse
16 136017 1 5 x 20mm 3.15 Amp Fuse
17 150009 2 6-32 x 1-1/2" Phillips Round Head Machine Screw
18 120701 1 4 T erminal Block
19 319724 1 Aquatex Power Distribution Bracket
20 151000 2 6-32 Pal Nut

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Rear Electrical Panel Assembly 416V Electric

23

Illus. No. Part No. Qty. Description

1 851157 1 CE Electrical Panel
2 132486 1 Power Disconnect
3 131357 1 Oven Contactor (for 416V)
4 132451 1 Blower Motor Contactor
5 120994 1 Bus Bar
6 137060 1 Arc Suppressor Board
7 829041 1 Transformer with Terminals (for 416V)
8 120995 2 Bus Bar Screws
9 136103 3 5 x 20mm Fuse Holder
10 120758 1 Feed Through T erminal Block
11 120765 2 Standard End Stop
12 137013 4 PC Board Mounting Standoff
13 153012 3 #8 Star Washer
14 152001 3 8/32 Hex Nut
15 120766 1 Small End Section
16 136019 1 5 x 20mm 1.0 Amp Fuse
17 136017 1 5 x 20mm 3.15 Amp Fuse
18 150009 2 6-32 x 1-1/2" Phillips Round Head Machine Screw
19 120701 1 4 T erminal Block
20 319724 1 Aquatex Power Distribution Bracket
21 151000 2 6-32 Pal Nut

Telephone: [phone] Fax: [phone]

24

Disconnect Panel Assembly 1 15V Gas

Illus. No. Part No. Qty. Description

1 319756 1 CE Disconnect Panel
2 120716 1 Power Distribution Block
3 137489 1 Power Disconnect
4 136019 1 5 x 20mm 1.0 Amp Fuse
5 136103 1 5 x 20mm Fuse Holder
6 150009 2 6-32 x 1-1/2" Phillips Round Head Machine Screw
7 151000 2 #6-32 Pal Nut
8 120766 1 End Section
9 120765 2 End Stop
10 120758 1 Feed Through Terminal Block

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Disconnect Panel Assembly 208-240V Gas

25

Illus. No. Part No. Qty. Description

1 319756 1 CE Disconnect Panel
2 120716 1 Power Distribution Block
3 137489 1 Power Disconnect
4 136019 2 5 x 20mm 1.0 Amp Fuse
5 136103 2 5 x 20mm Fuse Holder
6 150009 2 6-32 x 1-1/2" Phillips Round Head Machine Screw
7 151000 2 #6-32 Pal Nut
8 120766 1 End Section
9 120765 2 End Stop

Telephone: [phone] Fax: [phone]

26

Disconnect Panel Cover Gas

Illus. No. Part No. Qty. Description

1 143153 1 1/4" Poly x 1/4" MPT Elbow
2 141007 1 Air Jet Pre Filter
3 143240 1 1/4' Close Nipple
4 141008 1 Air Jet Pre Filter
5 182522 1 1/4" x 1/8" Reducing Bushing
6 143238 1 1/8" 90 Close Nipple
7 100520 1 1/8" Muffler
8 829020 1 3-W ay V alve Assembly
9 143268 1 1/8" Street Elbow
10 319750 1 Mounting Bracket
11 121400 1 7/8" I.D. Universal Bushing
12 ——— 1 Main Power Disconnect (Included with P/N: 137489 on page 32)
13 150512 2 1/4-20 x 1/2" HH-MB
14 153007 2 1/4" Lock W asher
15 153018 2 1/4" Flat W asher
16 150300 2 #10 x 1/2" Hex W asher Head TEK Screw
17 319769 1 Aquatex Disconnect Cover ONL Y (Gas ONLY)

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Main Electrical Disconnect / Air Filter Assembly Electric

27

Illus. No. Part No. Qty. Description

1 143153 1 1/4" Poly x 1/4" MPT Elbow
2 141007 1 Air Jet Pre Filter
3 143240 1 1/4' Close Nipple
4 141008 1 Air Jet Pre Filter
5 182522 1 1/4" x 1/8" Reducing Bushing
6 143238 1 1/8" Close Nipple
7 100520 1 1/8" Muffler
8 829020 1 3-W ay V alve Assembly
9 143268 1 1/8" 90 Street Elbow
10 153018 2 1/4 Flat W asher
11 153007 2 1/4 Split Lock W asher
12 150512 2 1/4-20 x 1/2" HH-MB
13 150300 2 #10 x 1/2" Hex W asher Head TEK Screw
14 319750 1 Mounting Bracket
15 132486 1 Disconnect Switch (Lockable)
16 319781 1 Aquatex Rear Panel ONL Y (Electric ONL Y)
17 121400 2 7/8" I.D. Universal Bushing

Telephone: [phone] Fax: [phone]

28

Rear V iew Electric

Illus. No. Part No. Qty. Description

1 Electric Oven Assembly. See Page 16, 17
2 Humidity Transmitter Assembly . See Page 15
3 Disconnect Panel Cover. See Page 27
4 Tumbler Bearing Assembly . See Page 10
5 Idler Bearing Assembly . See Page 1 1
6 Motor Mount Assembly. See Page 12, 13
7 103500 4 Leveling Leg
8 152001 1 8-32 Hex Nut
9 153018 1 1/4" Flat W asher
10 121488 1 3/8" Rubber Cushioned Clamp
11 150300 2 #10 x 1/2" Hex Washer Head TEK Screw
12 851182 1 Humidity Sensor Mount Assembly
13* 1 Humidity Sensor (Included with P/N: 136989.) See Page 15
14 143110 66" 1/4" Poly Flo Tubing
15 100472 1 1/4" Compression x 1/8 MPT Straight Connector
16 143259 1 1/4" Bulkhead Fitting
17 319753 1 Aluminum Airjet Tube

* Not Sold Separately Specific Resistive Calibration

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Rear V iew Gas

29

Illus. No. Part No. Qty. Description

1 Gas Burner Assembly. See Page 19
2 Disconnect Panel Cover. See Page 26
3 Humidity Transmitter Assembly. See Page 15
4 Tumbler Bearing Assembly. See Page 10
5 Idler Bearing Assembly. See Page 11
6 Motor Mount Assembly. See Page 12,13
7 103500 4 Leveling Leg
8 152001 1 8-32 Hex Nut
9 153018 1 1/4" Flat Washer
10 121488 1 3/8" Rubber Cushioned Clamp
11 150200 2 #10 x 1/2" Hex Washer TEK
12 851182 1 Humidity Sensor Mount Assembly
13* ——— 1 Humidity Sensor (Included with P/N: 136989.) See Page 15
14 143110 66" 1/4" Poly Flo Tubing
15 100472 1 1/4" Compression x 1/8 MPT Straight Connector
16 143259 1 1/4" Bulkhead Fitting
17 319753 1 Aluminum Airjet Tube

* Not Sold Separately Specific Resistive Calibration

Telephone: [phone] Fax: [phone]

30

Rear & T op Panel Assembly Gas

Illus. No. Part No. Qty. Description

1 319788 1 Lower Backguard
2 150301 9 #8-18 x 7/16" Phillips Pan Head TEK Screw
3 319769 1 Disconnect Cover ONL Y
4 150301 8 #8-18 x 7/16" Phillips Pan Head TEK Screw
5 319787 1 Top Backguard
6 150301 8 #8-18 x 7/16" Phillips Pan Head TEK Screw
7 312527 1 Outer T op
8 150301 7 #8-18 x 7/16" Phillips Pan Head TEK Screw
9 851183 1 Aquatex Outer T op Humidity Sensor Mount Assembly
10 121488 1 3/8" Rubber Cushioned Clamp
11 136989 1 Humidity Sensor Board/Filter
12 153012 1 #8 Star W asher
13 152001 1 8-32 Nut
14 150309 1 10-16 x 1/2" HH TEK Crimptite Screw

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Rear & T op Panel Assembly Electric

31

Illus. No. Part No. Qty. Description

1 314514 1 Plain Backguard
2 150301 10 #8-18 x 7/16" Phillips Pan Head TEK Screw
3 319781 1 Disconnect Panel ONLY
4 150301 6 #8-18 x 7/16" Phillips Pan Head TEK Screw
5 319776 1 Upper Backguard
6 150301 2 #8-18 x 7/16" Phillips Pan Head TEK Screw
7 830201 1 Aquatex T op
8 150301 6 #8-18 x 7/16" Phillips Pan Head TEK Screw
9 319748 1 Electrical Plate
10 150301 4 #8-18 x 7/16" Phillips Pan Head TEK Screw

Telephone: [phone] Fax: [phone]

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

32

WkTLOVESAHPERIW

42613Ø34 8309286411002158#0013316010121141U34753131

42802Ø33 9309286401002156#0023313010121141U36963131

42022Ø33 5609286431002154#0033313010121141U36963131

03614Ø34 0120386431002158#0101216010121141U34753131

NEVO

YLBMESSA

REBMUNTRAP

YTQ WK N/P YTQ EZIS N/P YTQ N/P 110121-N/P

STNEMELEERIWNEVOGULLANIMRETRABSUB

ON.TACONTRAP.

Electric Oven Component Application Chart

Additional Parts Available

Part No. Description

114094 Mop Head Warning Label
114006 "W arning Fire Hazard" Label
112280 "Clean Lint Screen" Label
114001 "Caution Exhaust/Lint Screen" Label
112534 "Phase 5 OPL Program Location Summary" Label
120100 3/8" Straight (BX) Connector
120300 3/8" x 45º (BX) Connector
120400 3/8" Red Jacket (BX) Insulator
120500 3/8" Jiffy Clip (BX Retainer Clip)
120600 3/8" Greenfield (BX)
120707 Terminal Strip (2-Position)
120708 Terminal Strip (3-Postion)
120800 1/4" In-Line Connector
120802 Red Butt Connector
120902 #74B Wire Nut
120903 Crimp-On Wire Nut
121014 1/4" Insulated (female) T erminal
121026 Tab Receptacle Combination
121499 4" Harness Tie
121500 7" Harness Tie
121503 Harness Tie Mounting Clip
122804 Manometer (Hydro Gauge) for measuring Gas Pressure
404500 Almond Brush-In-Cap Bottle T ouch Up Paint
404502 White Brush-In-Cap Bottle T ouch Up Paint
404506 Beige Brush-In-Cap Bottle T ouch Up Paint
404507 Cornflower Blue Brush-In-Cap bottle T ouch Up Paint

880200 Electrical T erminal (assortment) Kit

33

Telephone: [phone] Fax: [phone]

ADC 450197 1* 08/03/99-25