American Dryer Corp AD-52 User Manual

AD-52 Aquatex

Parts Manual

1995 thru 2000

American Dryer Corporation

88 Currant Road

Fall River, MA 02720-4781

Telephone: [phone] / Fax: [phone]

e-mail: [e-mail]

012100/DX/pb

ADC Part No. 450196

Retain This Manual In A Safe Place For Future Reference

American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is
properly maintained, it will provide many years of safe, efficient, and trouble-free operation.

ONLY qualified technicians should service this equipment.

OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation/operator's manual
included with the dryer.

The following FOR YOUR SAFETY caution must be posted near the dryer in a prominent location.

FOR YOUR SAFETY

Do not store or use gasoline or
other flammable vapors or liquids
in the vicinity of this or any other
appliance.

We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make
changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or
discontinue models.

POUR VOTRE SÉCURITÉ

Ne pas entreposer ni utiliser dessence
ni dautres vapeurs ou liquides
inflammables dans le voisinage de cet
appareil ou de yout autre appareil.

Important

For your convenience, log the following information:

DATE OF P URCHASE MODEL NO.

DISTRI BUTORS NAM E

Serial Number(s)

AD-52 AQUATEX

Replacement parts can be obtained from your distributor or the ADC factory. When ordering replacement parts from the
factory, you can FAX your order to ADC at [phone] or telephone your orders directly to the ADC Parts Department at
[phone]. Please specify the dryer model number and serial number in addition to the description and part number, so
that your order is processed accurately and promptly.

The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of th e
various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.

IMPORTANT NOTE TO PURCHASER

Information must be obtained from your local gas supplier on the instructions to be
followed if the user smells gas. These instructions must be posted in a prominent
location near the dryer.

Table of Contents

HIGH SECURITY CONTROL DOOR A SSEMBLY ............................................................................................... 2

MICROPROCESSOR CONTROL PANEL A SSEMBLY ........................................................................................... 3

MAIN DOOR ASSEMBLY ............................................................................................................................. 4

MAIN DOOR SWITCH ............................................................................................................................... 5

FRONT PANEL A SSEMBLY .......................................................................................................................... 6

BASKET (TUMBLER)/SUPPORT A SSEMBLIES ................................................................................................. 7

DROP LINT DOOR A SSEMBLY ..................................................................................................................... 8

LINT T RAP A SSEMBLY ............................................................................................................................... 9

TUMBLER BEARING A SSEMBLY ........................................................................................................... 10, 11

IDLER BEARING A SSEMBLY ...................................................................................................................... 12

HI-LIMIT SENSOR BRACKET ................................................................................................................... 13

TOTALLY ENCLOSED, FAN-COOLED (T.E.F.C.) MOTOR MOUNT A SSEMBLY .......................................... 14, 15

DIRECT SPARK IGNITION (DSI) BURNER A SSEMBLY ............................................................................. 16, 17

ELECTRIC OVEN A SSEMBLY ............................................................................................................... 18, 19

SAIL SWITCH/HIGH LIMIT A SSEMBLIES .................................................................................................... 20

REAR ELECTRIC PANEL A SSEMBLY

FOR

120 VOLT GAS MODELS ONLY .................................................................................................. 21

REAR ELECTRICAL PANEL A SSEMBLY

FOR

208-240 VOLT GAS MODELS ONLY ........................................................................................... 22

REAR ELECTRIC PANEL A SSEMBLY

FOR

208-240 VOLT ELECTRIC MODELS ONLY ................................................................................... 23

REAR ELECTRIC PANEL A SSEMBLY

FOR

416 VOLT ELECTRIC MODELS ONLY .......................................................................................... 24

DISCONNECT PANEL ASSEMBLY

FOR

120 VOLT GAS MODELS ONLY .................................................................................................. 25

DISCONNECT PANEL ASSEMBLY

FOR

208-240 VOLT GAS MODELS ONLY ........................................................................................... 26

DISCONNECT PANEL COVER

FOR

GAS MODELS ONLY ................................................................................................................... 27

MAIN ELECTRICAL DISCONNECT/AIR FILTER A SSEMBLY ............................................................................ 28

FOR GAS MODELS ONLY ................................................................................................................... 29

REAR VIEW

FOR

ELECTRIC MODELS ONLY ........................................................................................................... 30

REAR/TOP PANEL A SSEMBLIES

FOR

ELECTRIC MODELS ONLY ........................................................................................................... 31

REAR/TOP PANEL A SSEMBLIES

FOR

GAS MODELS ONLY ................................................................................................................... 32

HUMIDITY TRANSMITTER A SSEMBLY ........................................................................................................ 33

ELECTRIC OVEN APPLICATIONS CHART .................................................................................................... 34

2

High Security Control Door Assembly

Illus. No. Part No. Qty. Description

1 160017 1 Special Dummy Lock ONLY
2 160016 1 Lock Cam ONLY
3 112352 1 Logo ONLY
4 881349* 1 Control Door Assembly Less Lock

(includes illus. nos. 4 through 7)

881350* 1 Stainless Steel Control Door Assembly Less Lock

(includes illus. nos. 4 through 7)
5 180201 1 Top Trim Strip with Lock Hole
6 117603 3 Noise Suppressor Tape (sold by the foot)
7 150201 5 #10-32 x 1/4" Phillips Round Head Machine Screw
8 150300 4 #10 x 1/2" Hex Washer TEK Screw
9 102600 1 Control Door Support Rod Catch
10 102601 1 Control Door Rod Retainer Clip
11 102502 1 Control Door Support Rod
12 122641 1 15-Pin Microprocessor Connector
13 122706 ** Socket
14 153000 2 #10 x 1/2" Hex Head Machine Screw
15 319754 1 Bracket
16 152001 1 #8-32 Hex Nut
17 153018 1 #8 Internal Star Washer
18 121488 1 3/8" Rubber Cushioned Clamp
19 136989 1 Humidity Sensor Assembly
20 122640 1 9-Pin Connector
21 122706 ** Socket Mate-N-Lock
22 122642 1 6-Pin Connector

* Specify color when ordering.
** As required.

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Microprocessor Control Panel Assembly

3

Illus. No. Part No. Qty. Description

1 112535 1 OPL English Keyboard Label Assembly
2 801255 1 Phase 5 Microprocessor Control Panel ONLY

881319 1 Microprocessor Control Panel Assembly Complete

(includes illus. nos. 1 through 6)
3 137108 1 Phase 5 Microprocessor Controller (computer)
4 153010 2 # 6 Star Washer
5 150005 2 # 6-32 x 1/4" Phillips Round Head Machine Screw
6 150309 1 # 10-16 x 1/2" Phillips Hex Head TEK Crimptite Screw

Telephone: [phone] Fax: [phone]

4

Main Door Assembly

Illus. No. Part No. Qty. Description

1 881421 1 Gray Plastic Main Door Assembly Complete with Mechanical Fasteners

(includes illus. nos. 1 and 5 through 9)
2 800448 4 12-1/2" Stainless Steel Main Door Hinge Assembly
3 150410 4 #10-24 x 3/8" Phillips Pan Head Taptite Screw
4 152014 1 1/4-20 Free Spin Wash Nut
5 102349 1 Main Door Gasket
6 102212 1 20-7/16" Door Glass with (4) Holes

170730 1 Main Door Glass Adhesive (10.3 oz. cartridge)
7 150448 4 1/2" Stainless Steel Flat Head Allen Screw
8 170319 4 Door Glass (Nylon) Spacer
9 150431 1 Main Door Latch Screw

(#10 x 7/16" Dome Hex Head)

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Main Door Switch Assembly

5

Illus. No. Part No. Qty. Description

1 152013 2 #6-32 Hex Nut
2 153008 2 #6 Lock Washer
3 137005 1 Single Pole Door Switch
4 121028 2 Insulated Female Terminal
5 154281 2 3/8" Standard Nylon Spacer
6 800448 1 12-1/2" Stainless Steel Main Door Hinge Assembly

(includes illus. nos. 6 and 7)
7 153565 2 #6 Stud
8 313218 1 Main Door Switch Housing
9 150201 2 #10-32 x 1/4" Phillips Pan Head Screw
10 121405 1 Rubber Grommet

Telephone: [phone] Fax: [phone]

6

Front Panel Assembly

Illus. No. Part No. Qty. Description

1 881328* 1 Left Hand Front Panel

(includes illus. nos. 1 through 3 and 5)

881329* 1 Stainless Steel Left Hand Front Panel

(includes illus. nos. 1 through 3 and 5)
2 154215 2 5/32" Pop Rivet
3 170330 1 Friction Door Latch
4 150309 8 #10-16 x 1/2" Phillips Round Head Crimptite Screw
5 121405 1 Rubber Grommet
6 122351 1 "EMERGENCY STOP" (E-Stop) Twist and Lock Operator
7 122419 1 "EMERGENCY STOP" (E-Stop) Label
8 132395 1 Normally Closed Contact Block with Base

* Specify color when ordering.

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Basket (Tumbler)/Support Assemblies

7

Illus. No. Part No. Qty. Description

1* 800838 1 Galvanized Basket (Tumbler) ONLY (without felt collar)

800837** 1 Non-Reversing Galvanized Basket (Tumbler) and Support

Assembly with Tapered Ribs

(includes illus. nos. 1 through 10)
2 150309 40 #10-16 x 1/2" Phillips Round Hex Head TEK Crimptite Screw
3 301302 2 Basket (Tumbler) Rib ONLY (Low Rib)

301311 2 Tapered Basket (Tumbler) Baffle Rib ONLY (High Rib)
4 150500 1 5/16-18 x 3/4" Socket Button Head Screw
5 100903 4 3/8-16 x 38-1/2" Tie Rod
6 153004 4 3/8" Flat Washer
7 800616 1 Non-Reversing Basket (Tumbler) Support ONLY
8 152005 4 3/8-16 Hex Nut
9 153005 4 3/8" Lock Washer
10 153004 4 3/8" Flat Washer
11 116001 1 Felt Collar ONLY

-- 401010 1 #847 Adhesive for Felt Collar (5.0 oz tube)

* For stainless steel basket (tumbler) contact factory
** Felt collar is not included and must be ordered separately

Telephone: [phone] Fax: [phone]

8

Drop Lint Door Assembly

Illus. No. Part No. Qty. Description

1 800150 1 Knob Latch Kit Assembly

160200 1 Knob Latch ONLY with Two (2) Screws
160003 1 Dummy Lock Only

2 160008 1 Lock Cam For Dummy Lock

160009 1 Knob Latch Adjustable Cam
150425 1 #12-24 x 3/8" Round Head Machine Screw

(for Knob Latch Adjustable Cam)
3 157000 1 Drop Lint Door Spring
4 881351 1 Drop Lint Door Assembly

(includes illus. nos. 4 through 8)

881353 1 Insulated Drop Lint Door Assembly

(includes illus. nos. 4 through 8)

881352 1 Stainless Steel Drop Lint Door Assembly
5 150201 10 #10-32 x 1/4" Phillips Pan Head Machine Screw
6 117604 7 Neoprene Sponge Tape (sold by the foot)
7 117603 3 Noise Suppressor Tape (sold by the foot)
8 180211 1 #31-1/8" Trim
9 150419 2 #6 x 1/2" Tamper Proof TEK Screw

150418 1 Tamper Proof Screw Hand Driver
10 108120 1 Chain For Drop Lint Door

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Lint Trap Assembly

9

Illus. No. Part No. Qty. Description

1 800402 1 Lint Trap Assembly Complete

(includes illus. nos. 1, 3, 4, and 5)

800404 1 Lint Trap Only
2 154200 7 5/32" Pop Rivet
3 304101 1 Lint Screen Holder ONLY
4 150300 2 #10 x 1/2" Hex Washer TEK Screw
5 800501 1 Lint Screen Holder ONLY
6 150419 2 #6 x 1/2" Tamper Proof TEK Screw
7 108120 1 Chain for Drop Lint Door
 150418 1 Tamper Proof Screw Hand Driver

Telephone: [phone] Fax: [phone]

10

Tumbler Bearing Assembly

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781