American Dryer Corp AD-330, AD-320 User Manual

Download

Page 1

AD-330/AD-320 Parts Manual

24 VAC Phase 5

1992 thru 2001

American Dryer Corporation

88 Currant Road

Fall River, MA 02720-4781

Telephone: (508) 678-9000 / Fax: (508) 678-9447

e-mail: techsupport@amdry.com

www.amdry.com

062001MFM/calbert ADC Part No. 450113

Page 2

Retain This Manual In A Safe Place For Future Reference

American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is

properly maintained, it will provide many years of safe, efficient, and trouble-free operation.

ONLY qualified technicians should service this equipment.

OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer.

The following “FOR YOUR SAFETY ” caution must be posted near the dryer in a prominent location.

FOR YOUR SAFETY

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models.

POUR VOTRE SÉCURITÉ

Ne pas entreposer ni utiliser d’essence ni d’autres vapeurs ou liquides inflammables à proximité de cet appareil ou de tout autre appareil.

Important

For your convenience, log the following information:

DATE OF PURCHASE ____________________________ MODEL NO. __________________________________________

RESELLER’S NAME _______________________________________________________________________________________

Serial Number(s) ________________________________________________________________________________________

________________________________________________________________________________________

Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory, you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department at (508) 678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly.

The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.

“IMPORTANT NOTE TO PURCHASER”

Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer.

Page 3

Table of Contents

AD-330 (3-Leg) Coin and Debit Card Control Doors Assemblies

For Models Mfd. as of November 28, 2001 and Models Mfd. prior to June 9, 2001 ................................. 4

AD-320 (3-Leg) Coin and Debit Card Control Doors Assemblies

For Models Mfd. as of November 28, 2001 and Models Mfd. prior to June 9, 2001 ................................. 5

AD-330 (3-Leg) OPL Control Door Assembly

For Models Mfd. as of November 28, 2001 and Models Mfd. prior to June 9, 2001 ................................. 6

AD-320 (3-Leg) OPL Control Door Assembly

For Models Mfd. as of November 28, 2001 and Models Mfd. prior to June 9, 2001 ................................. 7

AD-330 OPL Control Door Assembly

For Models Mfd. Between June 9, 2001 and November 28, 2001........................................................... 8

AD-320 OPL Control Door Assembly

For Models Mfd. Between June 9, 2001 and November 28, 2001........................................................... 9

AD-330 Debit Card Control Door Assembly

For Models Mfd. Between June 9, 2001 and November 28, 2001.........................................................10

AD-320 Debit Card Control Door Assembly

For Models Mfd. Between June 9, 2001 and November 28, 2001......................................................... 11

AD-330 Lint Door Assembly

For Models Mfd. as of June 9, 2001...................................................................................................12

AD-330 Lint Door Assembly

For Models Mfd. prior to June 9, 2001 ...............................................................................................13

AD-320 Lint Door Assembly

For Models Mfd. as of June 9, 2001...................................................................................................14

AD-320 Lint Door Assembly

For Models Mfd. prior to June 9, 2001 ...............................................................................................15

AD-330 Lint Drawer (Basket) Assembly .................................................................................................16

AD-320 Lint Drawer (Basket) Assembly .................................................................................................17

Page 4

AD-330 Locking Lint Drawer (Basket) Assembly ....................................................................................18

AD-320 Locking Lint Drawer (Basket) Assembly ....................................................................................19

Single Hanke Coin, DMC Control Panel Assembly

For Domestic Single Coin (25¢) Models Mfd. as of January 12, 1996...................................................20

Single Coin, Coinco Microprocessor Control Panel Assembly

For Single Coin (25¢) Models Mfd. with Coinco Only prior to January 12, 1996 ....................................21

Dual Coin, Hanke Control Panel Assembly ...............................................................................................22

Coinco Dual Coin, (DMC) Control Panel Assembly

For Export Models Only ....................................................................................................................23

OPL Microprocessor (DMC) Control Panel Assembly ..............................................................................24

25¢ Coinco Coin Acceptor Component Listing

For Single Coin (25¢) Models Mfd. with Coinco Only prior to January 12, 1996 ....................................25

Coinco Dual Coin Acceptor Component Listing

For Export Models Only ............................................................................................................... 26, 27

Hanke Microprocessor Coin Acceptor Listing ..........................................................................................28

Coin Vault Assembly ...............................................................................................................................29

DMC Control Box Assembly .............................................................................................................. 30, 31

Upper Front Panel Assembly

For “Plastic Door”............................................................................................................................32

Lower Front Panel Assembly

For “Plastic Door”............................................................................................................................33

“Plastic” Main Door Assembly ................................................................................................................34

Main Door Switch Assembly For “Plastic” ...............................................................................................35

AD-330/320 Cold Rolled Steel (CRS) Door Top Front Panel.....................................................................36

AD-330/320 Cold Rolled Steel (CRS) Door Bottom Front Panel ................................................................ 37

Main Door Cold Rolled Steel (CRS) Assembly .........................................................................................38

Main Door Switch Assembly For Cold Rolled Steel (CRS) Type Door .......................................................39

AD-330 Basket (Tumbler)/Support Assemblies.................................................................................... 40, 41

Page 5

AD-320 Basket (Tumbler)/Support Assemblies.................................................................................... 42, 43

Basket (Tumbler) Brush Assembly ..........................................................................................................44

Temperature Sensor Probe Assembly ......................................................................................................45

Basket (Tumbler) Bearing Assembly ................................................................................................... 46, 47

AD-330 Lint Drawer (Basket) Switch Assembly ......................................................................................48

AD-320 Lint Drawer (Basket) Switch Assembly ......................................................................................49

Totally Enclosed, Non-Vent (T.E.N.V.) Motor/Idler Assemblies ............................................................ 50, 51

AD-330 Gas Train Assembly

For Models Mfd. as of April 17, 2000 with Johnson Controls Direct Spark Ignition (DSI) Module .....52, 53

AD-330 Gas Valve Train Assembly

For Models Mfd. prior to April 17, 2000 ........................................................................................ 54, 55

AD-320 Gas Train Assembly

For Models Mfd. as of April 17, 2000 with Johnson Controls Direct Spark Ignition (DSI) Module .....56, 57

AD-320 Gas Valve Train Assembly

For Models Mfd. prior to April 17, 2000 ........................................................................................ 58, 59

Electric Oven Assembly ..................................................................................................................... 60, 61

Burner Box/Piping Assemblies ................................................................................................................62

ADS-330/ADS-320 Steam Damper Assembly ..........................................................................................63

Sail Switch Assembly ..............................................................................................................................64

Back Guard Assemblies ..........................................................................................................................65

Optional Gas Piping and Exhaust Ducting Kits..........................................................................................66

12-Rib 95” (J) Poly Belt Arrangement .....................................................................................................67

Bottom Exhaust Duct Assembly and Cabinet Hi-Limit ..............................................................................68

Electric Oven Component Chart ..............................................................................................................69

Step Down Transformer Usage Listing ....................................................................................................70

Additional Parts Available .......................................................................................................................71

Page 6

AD-330 (3-Leg) Coin and Debit Card Control Doors Assemblies

For Models Mfd. as of November 28, 2001 and Models Mfd. prior to June 9, 2001

Illus. No. Part No. Qty. Description

1 880199* 1 AD-330 (3-leg) Coin Control Door Assembly Complete Less Locks

(includes illus. nos. 1 through 6)

880198 1 AD-330 (3-leg) Stainless Steel Coin Control Door Complete Less Locks

(includes illus. nos. 1 through 6) 2 180315 1 AD-330 Lower Door Trim (29-11/16 length) 3 150310 5 #8 x 1/2 Phillips Pan Head A Screw 4 180316 1 AD-330 Upper Door Trim (29-11/16 length) 5 150310 5 #8 x 1/2 Phillips Pan Head A Screw 6 117605 5 Neoprene Sponge Tape (sold by the foot)

For Models Mfd. as of March 6, 1998

117602 5 Noise Suppressor Tape (sold by the foot)

For Models Mfd. prior to March 6, 1998 7 160040 2 ACE® Lock Assembly ONLY 8 160140 - Key ONLY (key number XX4451)

* Specify color when ordering.

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Page 7

AD-320 (3-Leg) Coin and Debit Card Control Doors Assemblies

For Models Mfd. as of November 28, 2001 and Models Mfd. prior to June 9, 2001

Illus. No. Part No. Qty. Description

1 880193* 1 AD-320 (3-leg) Coin Control Door Assembly Complete Less Locks

(includes illus. nos. 1 through 6)

880192 1 AD-320 (3-leg) Stainless Steel Coin Control Door Complete Less Locks

(includes illus. nos. 1 through 6) 2 180315 1 AD-320 Lower Door Trim (29-11/16 length) 3 150310 5 #8 x 1/2 Phillips Pan Head A Screw 4 180316 1 AD-320 Upper Door Trim (29-11/16 length) 5 150310 5 #8 x 1/2 Phillips Pan Head A Screw 6 117605 5 Neoprene Sponge Tape (sold by the foot)

For Models Mfd. as of March 6, 1998

117602 5 Noise Suppressor Tape (sold by the foot)

For Models Mfd. prior to March 6, 1998 7 160040 2 ACE® Lock Assembly ONLY 8 160140 - Key ONLY (key number XX4451)

* Specify color when ordering.

Telephone: (508) 678-9000 Fax: (508) 678-9447

Page 8

AD-330 (3-Leg) OPL Control Door Assembly

For Models Mfd. as of November 28, 2001 and Models Mfd. prior to June 9, 2001

Illus. No. Part No. Qty. Description

1 880936* 1 AD-330 (3-leg) OPL Control Door Assembly Complete Less Locks

(includes illus. nos. 1 through 6) For Models Mfd. as of February 3, 1994

880196* 1 AD-330 (3-leg) OPL Control Door Assembly Complete Less Locks

(includes illus. nos. 1 through 6) For Models Mfd. prior to February 3, 1994

880197 1 AD-330 (3-leg) Stainless Steel OPL Control Door Complete Less Locks

For Models Mfd. as of March 6, 1998

117602 5 Noise Suppressor Tape (sold by the foot)

For Models Mfd. prior to March 6, 1998 7 160040 2 ACE® Lock Assembly ONLY 8 160140 - Key ONLY (key number XX4451)

* Specify color when ordering.

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Page 9

AD-320 (3-Leg) OPL Control Door Assembly

For Models Mfd. as of November 28, 2001 and Models Mfd. prior to June 9, 2001

Illus. No. Part No. Qty. Description

1 880935* 1 AD-320 (3-leg) OPL Control Door Assembly Complete Less Locks

(includes illus. nos. 1 through 6) For Models Mfd. as of February 3, 1994

880191* 1 AD-320 (3-leg) OPL Control Door Assembly Complete Less Locks

(includes illus. nos. 1 through 6) For Models Mfd. prior to February 3, 1994

880189 1 AD-320 (3-leg) Stainless Steel OPL Control Door Complete Less Locks

For Models Mfd. as of March 6, 1998

117602 5 Noise Suppressor Tape (sold by the foot)

For Models Mfd. prior to March 6, 1998 7 160040 2 ACE® Lock Assembly ONLY 8 160140 - Key ONLY (key number XX4451)

* Specify color when ordering.

Telephone: (508) 678-9000 Fax: (508) 678-9447

Page 10

AD-330 OPL Control Door Assembly

For Models Mfd. Between June 9, 2001 and November 28, 2001

Illus. No. Part No. Qty. Description

1 883107* 1 AD-330 OPL Door Assembly Complete

(includes illus. nos. 1 through 6 and 8)

883108 1 AD-330 Stainless Steel OPL Door Complete

(includes illus. nos. 1 through 6 and 8) 2 180315 1 AD-330 Lower Door Trim (29-11/16 length) 3 150310 5 #8 x 1/2 Phillips Pan Head A Screw 4 180316 1 AD-330 Upper Door Trim (29-11/16 length) 5 150310 5 #8 x 1/2 Phillips Pan Head A Screw 6 117604 3 Neoprene Sponge Tape (sold by the foot) 7 150314 4 #10-32 x 1/2 TORX and Bin Head Machine Screw 8 117606 2 5/16 Thick Neoprene Sponge Tape 9 154011 4 #10-32 Multi-Thread U-Nut

* Specify color when ordering.

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Page 11

AD-320 OPL Control Door Assembly

For Models Mfd. Between June 9, 2001 and November 28, 2001

Illus. No. Part No. Qty. Description

1 883105* 1 AD-320 Lint Door Assembly Complete

(includes illus. nos. 1 through 6 and 8)

883106 1 AD-320 Stainless Steel Lint Door Complete

(includes illus. nos. 1 through 6 and 8) 2 180315 1 AD-320 Lower Door Trim (29-11/16 length) 3 150310 5 #8 x 1/2 Phillips Pan Head A Screw 4 180316 1 AD-320 Upper Door Trim (29-11/16 length) 5 150310 5 #8 x 1/2 Phillips Pan Head A Screw 6 117604 3 Neoprene Sponge Tape (sold by the foot) 7 150314 4 #10-32 x 1/2 TORX and Bin Head Machine Screw 8 117606 2 5/16 Thick Neoprene Sponge Tape 9 154011 4 #10-32 Multi-Thread U-Nut

* Specify color when ordering.

Telephone: (508) 678-9000 Fax: (508) 678-9447

Page 12

AD-330 Debit Card Control Door Assembly

For Models Mfd. Between June 9, 2001 and November 28, 2001

Illus. No. Part No. Qty. Description

1 883109* 1 AD-330 Debit Card Control Door Assembly Complete

(includes illus. nos. 1 through 6 and 8)

883110 1 AD-330 Stainless Steel Debit Card Control Door Complete

* Specify color when ordering.

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Page 13

AD-320 Debit Card Control Door Assembly

For Models Mfd. Between June 9, 2001 and November 28, 2001

Illus. No. Part No. Qty. Description

1 880246* 1 AD-320 Lint Door Assembly Complete

(includes illus. nos. 1 through 6 and 8)

880195 1 AD-320 Stainless Steel Control Door Complete

* Specify color when ordering.

Telephone: (508) 678-9000 Fax: (508) 678-9447

Page 14

AD-330 Lint Door Assembly

For Models Mfd. as of June 9, 2001

Illus. No. Part No. Qty. Description

1 883114* 1 AD-330 Lint Door Assembly Complete Less Locks

(includes illus. nos. 1 through 6)

883116 1 AD-330 Stainless Steel Lint Door Complete Less Locks

* Specify color when ordering.

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Page 15

AD-330 Lint Door Assembly

For Models Mfd. prior to June 9, 2001

Illus. No. Part No. Qty. Description

1 880175* 1 AD-330 Lint Door Assembly Complete Less Locks

(includes illus. nos. 1 through 6)

880176 1 AD-330 Stainless Steel Lint Door Complete Less Locks

For Models Mfd. as of March 6, 1998

117602 5 Noise Suppressor Tape (sold by the foot)

For Models Mfd. prior to March 6, 1998 7 160040 2 ACE® Lock Assembly ONLY 8 160140 - Key ONLY (key number XX4451)

* Specify color when ordering.

Telephone: (508) 678-9000 Fax: (508) 678-9447

Page 16

AD-320 Lint Door Assembly

For Models Mfd. as of June 9, 2001

Illus. No. Part No. Qty. Description

1 883115* 1 AD-320 Lint Door Assembly Complete

(includes illus. nos. 1 through 6)

883113 1 AD-320 Stainless Steel Lint Door Complete

* Specify color when ordering.

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Page 17

AD-320 Lint Door Assembly

For Models Mfd. prior to June 9, 2001

Illus. No. Part No. Qty. Description

1 880246* 1 AD-320 Lint Door Assembly Complete Less Locks

(includes illus. nos. 1 through 6)

880195 1 AD-320 Stainless Steel Lint Door Complete Less Locks

For Models Mfd. as of March 6, 1998

117602 5 Noise Suppressor Tape (sold by the foot)

For Models Mfd. prior to March 6, 1998 7 160040 2 ACE® Lock Assembly ONLY 8 160140 - Key ONLY (key number XX4451)

* Specify color when ordering.

Telephone: (508) 678-9000 Fax: (508) 678-9447

Page 18

AD-330 Lint Drawer (Basket) Assembly

Illus. No. Part No. Qty. Description

1 800435* 1 AD-330 Lint Drawer (basket) Assembly Complete

(includes illus. nos. 1 and 2)

850706 1 AD-330 Stainless Steel Lint Drawer (basket) Assembly Complete

(includes illus. nos. 1 and 2)

2 117604 3 Neoprene Sponge Tape (sold by the foot)

For Models Mfd. as of March 6, 1998

117600 3 Noise Suppressor Tape (sold by the foot)

For Models Mfd. prior to March 6, 1998

3 --------- 1 Temperature Sensor Bracket

(refer to Temperature Sensor Probe Assembly on page 45)

4 --------- 1 Lint Drawer (basket) Switch

(refer to AD-330 Lint Drawer (Basket) Switch Assembly on page 48)

* Specify color when ordering.

IMPORTANT: For models with optional lock refer to AD-330 Locking Lint Drawer (Basket) Assembly

on page 18.

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Page 19

AD-320 Lint Drawer (Basket) Assembly

Illus. No. Part No. Qty. Description

1 800439* 1 AD-320 Lint Drawer (basket) Assembly Complete

(includes illus. nos. 1 and 2)

850710 1 AD-320 Stainless Steel Lint Drawer (basket) Assembly Complete

(includes illus. nos. 1 and 2)

2 117604 3 Neoprene Sponge Tape (sold by the foot)

For Models Mfd. as of March 6, 1998

117600 3 Noise Suppressor Tape (sold by the foot)

For Models Mfd. prior to March 6, 1998

3 --------- 1 Temperature Sensor Bracket

(refer to Temperature Sensor Probe Assembly on page 45)

4 --------- 1 Lint Drawer (basket) Switch

(refer to AD-320 Lint Drawer (Basket) Switch Assembly on page 49)

* Specify color when ordering.

IMPORTANT: For models with optional lock refer to AD-320 Locking Lint Drawer (Basket) Assembly

on page 19.

Telephone: (508) 678-9000 Fax: (508) 678-9447

Page 20

AD-330 Locking Lint Drawer (Basket) Assembly

Illus. No. Part No. Qty. Description

1 880182* 1 AD-330 Locking Lint Drawer (basket) Assembly Complete Less Lock

(includes illus. nos. 1 and 2)

880768 1 AD-330 Stainless Steel Locking Lint Drawer (basket) Assembly Complete

Less Lock (includes illus. nos. 1 and 2)

2 117604 3 Neoprene Sponge Tape (sold by the foot)

For Models Mfd. as of March 6, 1998

117600 3 Noise Suppressor Tape (sold by the foot)

For Models Mfd. prior to March 6, 1998

3 --------- 1 Temperature Sensor Bracket

(refer to Temperature Sensor Probe Assembly on page 45)

4 --------- 1 Lint Drawer (basket) Switch

(refer to AD-330 Lint Drawer (Basket) Switch Assembly on page 48)

5 160038 1 Lint Drawer Lock Assembly (keyed to number XX4451)

160140 1 Key ONLY (key number XX4451) 160034 1 Cam ONLY

* Specify color when ordering.

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Page 21

AD-320 Locking Lint Drawer (Basket) Assembly

Illus. No. Part No. Qty. Description

1 880769* 1 AD-320 Locking Lint Drawer (basket) Assembly Complete Less Lock

(includes illus. nos. 1 and 2)

880770 1 AD-320 Stainless Steel Locking Lint Drawer (basket) Assembly Complete

Less Lock

(includes illus. nos. 1 and 2) 2 117604 3 Neoprene Sponge Tape (sold by the foot)

For Models Mfd. as of March 6, 1998

117600 3 Noise Suppressor Tape (sold by the foot)

For Models Mfd. prior to March 6, 1998 3 --------- 1 Temperature Sensor Bracket

(refer to Temperature Sensor Probe Assembly on page 45) 4 --------- 1 Lint Drawer (basket) Switch

(refer to AD-320 Lint Drawer (Basket) Switch Assembly on page 49) 5 160038 1 Lint Drawer Lock Assembly (keyed to number XX4451)

160140 1 Key ONLY (key number XX4451) 160034 1 Cam ONLY

* Specify color when ordering.

Telephone: (508) 678-9000 Fax: (508) 678-9447

Page 22

Single Hanke Coin, DMC Control Panel Assembly

For Domestic Single Coin (25¢) Models Mfd. as of January 12, 1996

Illus. No. Part No. Qty. Description

1 112566 1 Hanke Single Coin Twin Keyboard (touch pad) Label 2 881482 1 Single Coin Control Panel Complete Less Acceptor - 24 VAC

(includes illus. nos. 1 through 5, 9, and 10)

881485 1 Microprocessor Control Panel Complete with Battery Option - 24 VAC

(includes illus. nos. 1 through 5, 9, and 10)

881483 1 Hanke Dual Microprocessor Controller (DMC) Control Panel

with Keyboard (touch pad) Label ONLY (includes illus. nos. 1 and 2)

3 137234 1 Phase 5 Dual Microprocessor Controller (DMC) ONLY

824998 1 Phase 5 Battery Clip...Not Illustrated 4 153010 2 #6 Star Washer 5 150005 2 #6-32 x 1/4 Phillips Round Head Machine Screw 6 --------- - Coin Acceptor with Optic Switch

(refer to Hanke Microprocessor Coin Acceptor Listing on page 28) 7 881143 1 Hanke Optical Switch ONLY 8 150309 1 #10-16 x 1/2 Hex Head TEK Crimptite Screw 9 136048 2 1/8-Amp (slo blo) Fuse 10 152102 4 M3 Metric Hex Nut

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Page 23

Single Coin, Coinco Microprocessor Control Panel Assembly

For Single Coin (25¢) Models Mfd. with Coinco ONLY prior to January 12, 1996

Illus. No. Part No. Qty. Description

1 112562* 1 Single Coin Twin Keyboard (touch pad) Label

(for models mfd. as of May 25, 1993)

112556* 1 Hanke Single Coin Twin Keyboard (touch pad) Label ONLY

(for models mfd. prior to May 25, 1993)

2 824033 1 25¢ (U.S.) Microprocessor Control Panel Complete with Battery - 24 VAC

(includes illus. nos. 1 through 7 and 9)

824012 1 Single Coin Control Panel Complete Less Acceptor - 24 VAC

(includes illus. nos. 1 through 5 and 7 through 9)

801262 1 Dual Microprocessor Controller (DMC) Control Panel ONLY

3 137234 1 Phase 5 Dual Microprocessor Controller (DMC) ONLY

824998 1 Phase 5 Battery Clip...Not Illustrated 4 153010 2 #6 Star Washer 5 150005 2 #6-32 x 1/4 Phillips Round Head Machine Screw 6 --------- 1 25¢ Coin Acceptor ONLY

(refer to 25¢ Coinco Coin Acceptor Component Listing on page 25) 7 137056 1 Optical Switch ONLY 8 150309 1 #10-16 x 1/2 Hex Head TEK Crimptite Screw 9 136048 2 0.125-Amp Fuse

* Contact factory for export models.

Telephone: (508) 678-9000 Fax: (508) 678-9447

Page 24

Dual Coin, Hanke Control Panel Assembly

Illus. No. Part No. Qty. Description

1 112567 1 Hanke Dual Coin Keyboard (touch pad) Label 2 881626 1 Hanke Phase 5 Dual Coin Control Panel Assembly Complete Less Acceptor

(includes illus. nos. 1 through 5, 9, and 10)

881627 1 Hanke Dual Coin Control Panel with Label ONLY

(includes illus. nos. 1 and 2)

881628 1 Hanke Dual Coin Control Panel ONLY

3 137234 1 Phase 5 Dual Microprocessor Controller (DMC) ONLY

824998 1 Phase 5 Battery Clip...Not Illustrated 4 153010 2 #6 Star Washer 5 150005 2 #6-32 x 1/4 Phillips Round Head Machine Screw 6 --------- - Coin Acceptor with Optic Switch

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Page 25

Coinco Dual Coin, (DMC) Control Panel Assembly

For Export Models ONLY

Illus. No. Part No. Qty. Description

1 112557 1 AD-330/AD-320 Dual Coin Twin Keyboard (touch pad) Label ONLY 2 824019 1 AD-330/AD-320 Dual Coin Control Panel Assembly Less Coin Acceptor

(includes illus. nos. 1 through 5 and 11)

801263 1 AD-330/AD-320 Dual Coin Control Panel

3 137234 1 Phase 5 Dual Microprocessor Controller (DMC) ONLY

824998 1 Phase 5 Battery Clip...Not Illustrated 4 153010 2 #6 Star Washer 5 150005 2 #6-32 x 1/4 Phillips Round Head Machine Screw 6 --------- 1 Dual Coin Acceptor ONLY

(refer to Coinco Dual Coin Acceptor Component Listing

on page 26 and page 27) 7 137056 2 Optical Switch ONLY 8 150309 1 #10-16 x 1/2 Hex Head TEK Crimptite Screw 9 112153 1 25¢/$1 Currency Label (Canada Only)

112152 1 20P/50P Currency Label (United Kingdom Only) 112154 1 20P/1£ Currency Label (United Kingdom Only) 112150 1 5BF/20BF Currency Label (Belgium Only) 112151 1 2FF/5FF Currency Label (France Only) 112155 1 5KR/10KR Currency Label (Denmark Only)

112156 1 25¢/1G Currency Label (Netherlands Only) 10 150020 1 #4-40 x 5/16 Slotted Pan Head Machine Screw 11 136048 2 0.125-Amp Fuse

Telephone: (508) 678-9000 Fax: (508) 678-9447

Page 26

OPL Microprocessor (DMC) Control Panel Assembly

Illus. No. Part No. Qty. Description

1 112556 1 Hanke Single Coin Twin Keyboard (touch pad) Label ONLY 2 824009 1 OPL Control Panel Assembly Complete - 24 VAC

(includes illus. nos. 1 through 5 and 7)

824011 1 OPL Control Panel Assembly Complete with Battery Option - 24 VAC

(includes illus. nos. 1 through 5 and 7)

850469 1 OPL Control Panel ONLY

(for models mfd. as of December 6, 2001)

3 137234 1 Phase 5 Dual Microprocessor Controller (DMC) ONLY

824998 1 Phase 5 Battery Clip...Not Illustrated 4 153010 2 #6 Star Washer 5 150005 2 #6-32 x 1/4 Phillips Round Head Machine Screw 6 150309 1 #10-16 x 1/2 Hex Head TEK Crimptite Screw 7 136048 2 1/8-Amp (slo blo) Fuse

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Page 27

25¢ Coinco Coin Acceptor Component Listing

For Single Coin (25¢) Models Mfd. with Coinco ONLY prior to January 12, 1996

Illus. No. Part No. Qty. Description

1 881930 1 25¢ Coin Acceptor Body ONLY 2 154320 1 #4-40 x 11/16 x 1 U-Bolt ONLY 3 880800 1 Small Lower Reject with Bracket Kit

(includes illus. nos. 3 and 15)

125720 1 25¢ Coin Acceptor Lower Reject with Bracket ONLY 4 152016 2 #4-40 Hex Nut 5 150020 1 #4-40 x 5/16 Slotted Pan Head Machine Screw 6 137056 1 Optical Switch ONLY 7 137049 1 Optical Switch Mounting Bracket ONLY 8 150020 1 #4-40 x 5/16 Slotted Pan Head Machine Screw 9 150020 1 #4-40 x 5/16 Slotted Pan Head Machine Screw 10 125715 1 25¢ Coin Acceptor Upper Assembly Complete

(includes illus. nos. 10 through 14) 11 125706 1 3/16 Coin Acceptor Retaining Ring ONLY 12 125704 1 Coin Acceptor Spring ONLY 13 125705 2 Coin Acceptor Spacer ONLY 14 125703 1 Coin Acceptor Rod ONLY 15 150110 1 #8-32 x 1/4 Binding Head Phillips Machine Screw

Telephone: (508) 678-9000 Fax: (508) 678-9447

Page 28

Coinco Dual Coin Acceptor Component Listing

For Export Models ONLY

Illus. No. Part No. Qty. Description

1 125726 1 $1 Canadian Coin Acceptor Body ONLY

125729 1 50 English Pence (50P) Coin Acceptor Body ONLY 881931 1 1 English Pound (1£) Coin Acceptor Body ONLY 125732 1 20 Belgian Franc (20BF) Coin Acceptor Body ONLY 125735 1 5 French Franc (5FF) Coin Acceptor Body ONLY 125738 1 10 Danish Krone (10KR) Coin Acceptor Body ONLY 881923 1 1 Du tch Guilder (1G) Coin Acceptor Body ONLY

2 882054 1 25¢ Canadian Coin Acceptor Body ONLY

125728 1 20 English Pence (20P) Coin Acceptor Body ONLY 125731 1 5 Belgian Franc (5BF) Coin Acceptor Body ONLY 125734 1 2 French Franc (2FF) Coin Acceptor Body ONLY 125737 1 5 Danish Krone (5KR) Coin Acceptor Body ONLY

881926 2 25¢ Dutch Guilder Coin Acceptor Body ONLY 3 154320 2 #4-40 x 11/16 x 1 U-Bolt ONLY 4 880801 1 Larg e Lower Reject with Bracket Kit

(includes illus. nos. 4 and 18)

125721 1 $1 Canadian Coin Acceptor Lower Assembly ONLY

1 50 English Pence (50P) Coin Acceptor Lower Assembly ONLY 1 1 English Pound (1£) Coin Acceptor Lower Assembly ONLY 1 20 Belgian Franc (20BF) Coin Acceptor Lower Assembly ONLY 1 5 French Franc (5FF) Coin Acceptor Lower Assembly ONLY 1 10 Danish Krone (10KR) Coin Acceptor Lower Assembly ONLY 1 1 Dutch Guilder (1G) Coin Acceptor Lower Assembly ONLY

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Page 29

Coinco Dual Coin Acceptor Component Listing (continued)

For Export Models ONLY

Illus. No. Part No. Qty. Description

5 880800 1 Small Lower Reject with Bracket Kit

(includes illus. nos. 5 and 18)

125720 1 25¢ Canadian Coin Acceptor Lower Assembly ONLY

1 20 English Pence (20P) Coin Acceptor Lower Assembly ONLY 1 5 Belgian Franc (5BF) Coin Acceptor Lower Assembly ONLY 1 25¢ Dutch Guilder Coin Acceptor Lower Assembly ONLY

880801 1 Large Lower Reject with Bracket Kit

(includes illus. nos. 5 and 18)

125721 1 2 French Franc (2FF) Coin Acceptor Lower Assembly ONLY

1 5 Danish Krone (5KR) Coin Acceptor Lower Assembly ONLY 6 152016 4 #4-40 Hex Nut 7 150020 2 #4-40 x 5/16 Slotted Pan Head Machine Screw 8 137056 2 Optical Switch ONLY 9 137049 2 Optical Switch Mounting Bracket ONLY 10 150020 2 #4-40 x 5/16 Slotted Pan Head Machine Screw 11 150020 2 #4-40 x 5/16 Slotted Pan Head Machine Screw 12 125716 1 $1 Canadian Coin Acceptor Upper Assembly Complete

(includes illus. nos. 12 and 14 through 17)

1 50 English Pence (50P) Coin Acceptor Upper Assembly Complete

(includes illus. nos. 12 and 14 through 17)

1 1 English Pound (1£) Coin Acceptor Upper Assembly Complete

(includes illus. nos. 12 and 14 through 17)

1 20 Belgian Franc (20BF) Coin Acceptor Upper Assembly Complete

(includes illus. nos. 12 and 14 through 17)

1 5 French Franc (5FF) Coin Acceptor Upper Assembly Complete

(includes illus. nos. 12 and 14 through 17)

1 10 Danish Krone (10KR) Coin Acceptor Upper Assembly Complete

(includes illus. nos. 12 and 14 through 17)

1 1 Dutch Guilder (1G) Coin Acceptor Upper Assembly Complete

(includes illus. nos. 12 and 14 through 17)

13 125715 1 25¢ Canadian Coin Acceptor Upper Assembly Complete

(includes illus. nos. 13 through 17)

1 20 English Pence (20P) Coin Acceptor Upper Assembly Complete

(includes illus. nos. 13 through 17)

1 5 Belgian Franc (5BF) Coin Acceptor Upper Assembly Complete

(includes illus. nos. 13 through 17)

1 25¢ Dutch Guilder Coin Acceptor Upper Assembly Complete

(includes illus. nos. 13 through 17)

125716 1 2 French Franc (2FF) Coin Acceptor Upper Assembly Complete

(includes illus. nos. 13 through 17)

1 5 Danish Krone (5KR) Coin Acceptor Upper Assembly Complete

(includes illus. nos. 13 through 17) 14 125706 2 3/16 Coin Acceptor Retainer Ring ONLY 15 125704 2 Coin Acceptor Spring ONLY 16 125705 4 Coin Acceptor Spacer ONLY 17 125703 2 Coin Acceptor Rod ONLY 18 150110 2 #8-32 x 1/4 Binding Head Phillips Machine Screw

Telephone: (508) 678-9000 Fax: (508) 678-9447

Page 30

NOTE: Coin acceptors listed include optical switch(es).

Hanke Microprocessor Coin Acceptor Listing

Single Coin*

ADC Part No. Nation Description

881163 United States 25¢ Optic Coin Acceptor 881450 Canada 25¢ Canadian Optic Coin Acceptor 881451 ----- 0.880 x 0.062 Token Optic Coin Acceptor 881636 ----- 0.800 x 0.07 Token Optic Coin Acceptor 881546 Japan 100 Yen Optic Coin Acceptor

Dual Coin*

881609 France 2/5 French Franc Dual Optic Coin Acceptor 881610 Belgium 5/20 Belgian Franc Dual Optic Coin Acceptor

* Consult factory for coin acceptors not listed.

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Page 31

Coin Vault Assembly

Illus. No. Part No. Qty. Description

1* 880118 1 AD-330/AD-320 Coin Box Assembly ONLY Less Lock 2** 160036 1 ACE® Lock Assembly with Key 3** 160136 1 ACE® Key ONLY 4 880117* 1 AD-330/AD-320 Coin Vault Assembly ONLY Less Lock

(includes illus. nos. 1, 4, and 6) 5 800690* 1 AD-330/AD-320 Lower Front Panel Assembly Complete with Hinge

(refer to Lower Front Panel Assembly For Plastic Door on page 33)

800687 1 AD-330/AD-320 Stainless Steel Lower Front Panel Assembly Complete

with Hinge

(refer to Lower Front Panel Assembly For Plastic Door on page 33) 6 152014 4 1/4-20 Free Spin Wash Nut

* Specify color when ordering. ** Specify key number when ordering.

Telephone: (508) 678-9000 Fax: (508) 678-9447

Page 32

DMC Control Box Assembly

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Page 33

DMC Control Box Assembly

Illus. No. Part No. Qty. Description

1 824439 1 AD-330/AD-320 Electric Box Complete - 120 Volt

(includes illus. nos. 1 through 17, 20, 21, and 24 through 27)

824437 1 AD-330/AD-320 Electric Box Complete - 208 Volt

(includes illus. nos. 1 through 17, 20, 21, and 24 through 27)

824438 1 AD-330/AD-320 Electric Box Complete - 240 Volt

(includes illus. nos. 1 through 17, 20, 21, and 24 through 27) 2 150103 2 #8-32 x 3/4 Phillips Round Head Machine Screw 3 141403 1 Transformer - 24 VAC (gas models Only)

(for electrically heated models refer to 4 151001 2 #8-32 Pal Nut 5 151000 1 #6-32 Pal Nut 6* 136008 ** 3-Position Fuse Block 7 150002 1 #6-32 x 1 Round Head Machine Screw 8* 136057 3** 1/2-Amp (slo blo) Fuse ONLY 9 150002 2 #6-32 x 1 Round Head Machine Screw 10 120715 1 30-Position Terminal Block 11 151000 2 #6-32 Pal Nut 12 150103 4 #8-32 x 3/4 Phillips Round Head Machine Screw 13 132451 2 2-Pole Contactor 14 151001 4 #8-32 Pal Nut 15 824828 2 RC Network with Connectors 16 122626 1 15-Pin Socket Connector ONLY 17 122705 9 Socket Terminal ONLY 18 122704 9 Pin Terminal ONLY 19 122625 1 15-Pin Connector ONLY

137025 1 6/15-Position Strain Relief...Not Illustrated 20 122631 1 6-Pin Socket Connector ONLY 21 122705 6 Socket Terminal ONLY 22 122704 6 Pin Terminal ONLY 23 122630 1 6-Pin Connector ONLY

137025 1 6/15-Position Strain Relief...Not Illustrated 24 150309 1 #10-16 x 1/2 Hex Head TEK Crimptite Screw 25 121010 1 L-70 Terminal Lug 26 122626 1 15-Pin Socket Connector ONLY 27 122705 7 Socket Terminal ONLY 28 122704 7 Pin Terminal ONLY 29 122625 1 15-Pin Connector ONLY

137025 1 6/15-Position Strain Relief...Not Illustrated 30 121494 10 Push-Mount Wire Tie

-- 122801 1 Pin/Socket Extraction Tool...Not Illustrated

-- 122800 1 Microprocessor (female) Pin Extraction Tool

page 70)

* Check fuse rating for verification. ** For 120 volt application the quantity is 1. For 208/240 volt application the quantity is 2.

Telephone: (508) 678-9000 Fax: (508) 678-9447

Page 34

Upper Front Panel Assembly

For Plastic Door

Illus. No. Part No. Qty. Description

1 800685* 1 AD-330/AD-320 Upper Front Panel Assembly Complete with Hinge

(includes illus. nos. 1, 2, 3, and 6)

800686 1 AD-330/AD-320 Stainless Steel Upper Front Panel Assembly Complete

with Hinge

(includes illus. nos. 1, 2, 3, and 6) 2 154215 2 1/8 Pop Rivet 3 170330 1 Friction Door Latch 4 881053 1 ADC Logo with Adhesive Tape

870011 - Logo Double Sided Tape Kit

5 150309 8 #10-16 x 1/2 Hex Head TEK Crimptite Screw

150313 8 TORX Head Screw

(for models mfd. as of October 2, 2000) 6 121405 1 Rubber Grommet

* Specify color when ordering.

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Page 35

Lower Front Panel Assembly

For Plastic Door

Illus. No. Part No. Qty. Description

1 800690* 1 AD-330/AD-320 Lower Front Panel Assembly Complete with Hinge

(includes illus. nos. 1, 2, 3, and 5) For Coin Models ONLY

800687 1 AD-330/AD-320 Stainless Steel Lower Front Panel Assembly Complete

with Hinge (includes illus. nos. 1, 2, 3, and 5) For Coin Models ONLY

800685 1 AD-330/AD-320 Lower Front Panel Assembly Complete with Hinge

(includes illus. nos. 1, 2, 3, and 5) For OPL Models ONLY

800686 1 AD-330/AD-320 Stainless Steel Lower Front Panel Assembly Complete

with Hinge (includes illus. nos. 1, 2, 3, and 5)

For OPL Models ONLY 2 154215 2 1/8 Pop Rivet 3 170330 1 Friction Door Latch 4 150309 9 #10-16 x 1/2 Hex Head TEK Crimptite Screw

150313 8 TORX Head Screw

(for models mfd. as of October 2, 2000) 5 121405 1 Rubber Grommet

* Specify color when ordering.

Telephone: (508) 678-9000 Fax: (508) 678-9447

Page 36

Plastic Main Door Assembly

Illus. No. Part No. Qty. Description

1 881422 1 Black Plastic Main Door Assembly Complete with Mechanical Fasteners

(includes illus. nos. 1 and 5 through 9) 2 800448 1 12-1/2 Stainless Steel Main Door Hinge Assembly 3 150410 4 #10-24 x 3/8 Phillips Pan Head Taptite Screw 4 152014 4 1/4-20 Free Spin Wash Nut 5 102349 1 Main Door Gasket 6 102212 1 20-7/16 Door Glass with Four (4) Holes

(for models mfd. as of August 23, 1996)

102210 1 20-7/16 Door Glass

(for models mfd. prior to August 23, 1996)

170730 1 Main Door Glass Adhesive (10.3 oz. cartridge) 7 150448 4 1/2 Stainless Steel Flat Head Allen Screw 8 170319 4 Door Glass (nylon) Spacer 9 150431 1 Main Door Latch Screw

(#10 x 7/16 dome hex head)

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Page 37

Main Door Switch Assembly For Plastic

Illus. No. Part No. Qty. Description

1 152013 2 #6-32 Hex Nut 2 153008 2 #6 Lock Washer 3 137005 1 Single-Pole Door Switch (SDS) 4 121028 2 Insulated Female Terminal 5 154281 2 3/8 Standard Nylon Spacers 6 800448 1 12-1/2 Stainless Steel Main Door Hinge Assembly 7 153565 2 #6 Stud 8 881246 1 Main Door Switch Housing ONLY 9 150201 2 #10-32 x 1/4 Phillips Pan Head Screw 10 121405 1 Rubber Grommet

Telephone: (508) 678-9000 Fax: (508) 678-9447

Page 38

AD-330/320 Cold Rolled Steel (CRS) Door Top Front Panel

Illus. No. Part No. Qty. Description

1 881278* 1 AD-330/320 Top Front Panel Assembly (cold rolled steel [CRS] door)

(includes illus. nos. 1 through 3)

881294 1 AD-330/320 Stainless Steel Top Front Panel Assembly (cold rolled steel

[CRS] door)

(includes illus. nos. 1 through 3) 2 154215 2 1/8 Pop Rivet 3 170330 1 Friction Door Latch 4 150309 8 #10-16 x 1/2 Phillips Hex Head TEK Crimptite Screw

150313 8 TORX Head Screw

(for models mfd. as of October 2, 2000) 5 881152 1 Black Top Hinge Block Assembly

881208 1 Stainless Steel Top Hinge Block Assembly

6 881151 1 Black Bottom Hinge Block Assembly

881209 1 Stainless Steel Bottom Hinge Block Assembly

7 150445 4 1/4-20 x 7/8 Black Cap Head Setscrew

150443 4 1/4-20 x 7/8 Stainless Steel Cap Head Setscrew

* Specify color when ordering.

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Page 39

AD-330/320 Cold Rolled Steel (CRS) Door Bottom Front Panel

Illus. No. Part No. Qty. Description

1 881277* 1 AD-330/320 Bottom Front Panel Assembly (cold rolled steel [CRS] door)

For Coin Models ONLY (includes illus. nos. 1 through 3)

881278* 1 AD-330/320 OPL Bottom Front Panel Assembly (cold rolled steel

[CRS] door) (includes illus. nos. 1 through 3)

800693 1 AD-330/320 Stainless Steel Bottom Front Panel Assembly (cold rolled steel

[CRS] door) For Coin Models ONLY (includes illus. nos. 1 through 3)

881294 1 AD-330/320 OPL Stainless Steel Bottom Front Panel (cold rolled steel

[CRS] door)

(includes illus. nos. 1 through 3) 2 154215 2 1/8 Pop Rivet 3 170330 1 Friction Door Latch 4 150309 8 #10-16 x 1/2 Phillips Hex Head TEK Crimptite Screw

150313 8 TORX Head Screw

(for models as of October 2, 2000) 5 881152 1 Black Top Hinge Block Assembly

881208 1 Stainless Steel Top Hinge Block Assembly

6 881151 1 Black Bottom Hinge Block Assembly

881209 1 Stainless Steel Bottom Hinge Block Assembly

7 150445 4 1/4-20 x 7/8 Black Cap Head Setscrew

150443 4 1/4-20 x 7/8 Stainless Steel Cap Head Setscrew

* Specify color when ordering.

Telephone: (508) 678-9000 Fax: (508) 678-9447

Page 40

Main Door Cold Rolled Steel (CRS) Assembly

Illus. No. Part No. Qty. Description

1 881150 1 Black Main Door Assembly Complete

(includes illus. nos. 1, 2, and 8 through 15)

2 102354 1 Door Gasket

170730 1 Clear Glass Adhesive (10.3 oz. cartridge) 170731 1 Black Glass Adhesive (10.3 oz. cartridge)

3 881152 1 Black Top Hinge Block Assembly

(includes illus. nos. 3 and 4) 4 150445 2 1/4-20 x 3/4 Black Cap Head Setscrew 5 153031 1 1/4 Nylon Washer 6 881151 1 Black Bottom Hinge Block Assembly

(includes illus. nos. 5, 6, and 7) 7 150445 2 1/4-20 x 3/4 Black Cap Head Setscrew

150443 2 1/4-20 x 3/4 Stainless Steel Cap Head Setscrew 8 150683 3 1/4-20 x 5/8 Black Carriage Bolt 9 152014 3 1/4-20 Free Spin Wash Nut 10 151010 1 #10-32 Black Hex Acorn Nut 11 150120 1 Door Latch Screw 12 150683 3 1/4-20 x 5/8 Black Carriage Bolt 13 152014 3 1/4-20 Free Spin Wash Nut 14 881210 1 Black Main Door Handle ONLY 15 102218 1 20-7/16 Door Glass

170731 1 Black Glass Adhesive (10.3 oz. cartridge) 16 151013 4 #10-32 Black Nylon Acorn Nut

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Page 41

Main Door Switch Assembly For Cold Rolled Steel (CRS) Type Door

Illus. No. Part No. Qty. Description

1 153566 2 #6-32 x 7/8 Clinch Stud 2 152013 2 #6-32 Hex Nut 3 153010 2 #6 Star Washer 4 137005 1 Single-Pole Door Switch (SDS) 5 122636 2 Flag Terminal 6 881211 1 Main Door Switch Housing 7 150301 2 #8-18 x 7/16 Phillips Pan Head TEK Screw

Telephone: (508) 678-9000 Fax: (508) 678-9447

Page 42

AD-330 Basket (Tumbler)/Support Assemblies

Illus. No. Part No. Qty. Description

1 800832 1 AD-330 Basket (tumbler) and Support Assembly Complete with Felt Collar

(includes illus. nos. 1 through 11 and 13)

800892 1 AD-330 Stainless Steel Basket (tumbler) and Support Assembly Complete

with Felt Collar (includes illus. nos. 1 through 11 and 13)

800722 1 AD-330 Basket (tumbler) ONLY without Felt Collar

(includes illus. nos. 1, 2, and 3)

800842 1 AD-330 Stainless Steel Basket (tumbler) ONLY without Felt Collar

(includes illus. nos. 1, 2, and 3)

100812 1 1-3/8 E-Clip Retaining Ring...Not Illustrated 2 150309 30 #10-16 x 1/2 Hex Head TEK Crimptite Screw 3 301315 2 AD-330 Galvanized Short Basket (tumbler) Rib

301316 1 AD-330 Galvanized Tall Basket (tumbler) Rib

301414 2 AD-330 Stainless Steel Short Basket (tumbler) Rib

301415 1 AD-330 Stainless Steel Tall Basket (tumbler) Rib 4 150500 1 5/16-18 x 3/8 Socket Button Head Screw 5 100915 3 3/18-16 x 31-1/8 Tie Rod

(for models mfd. as of July 24, 1998)

100902 3 5/16-18 x 31 Tie Rod

(for models mfd. prior to July 24, 1998)

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Page 43

AD-330 Basket (Tumbler)/Support Assemblies (continued)

Illus. No. Part No. Qty. Description

6 153004 3 3/8 x 1 Flat Washer

(for models mfd. as of July 24, 1998)

153001 3 5/16 Flat Washer

(for models mfd. prior to July 24, 1998) 7 850061 1 AD-330 Basket (tumbler) Support ONLY 8 152005 3 3/8-16 Hex Nut

(for models mfd. as of July 24, 1998)

152004 3 5/16-18 Hex Nut

(for models mfd. prior to July 24, 1998) 9 153005 3 3/8 Lock Washer

(for models mfd. as of July 24, 1998)

153002 3 5/16 Lock Washer

(for models mfd. prior to July 24, 1998) 10 153004 3 3/8 x 1 Flat Washer

(for models mfd. as of July 24, 1998)

153001 3 5/16 Flat Washer

(for models mfd. prior to July 24, 1998) 11 116003 1 Felt Collar

401010 1 #847 Adhesive for Felt Collar (5 oz. tube) 12 100173 1 12-Rib 95 Belt 13 115992 1 Felt Collar

401010 1 #847 Adhesive for Felt Collar (5 oz. tube)

Telephone: (508) 678-9000 Fax: (508) 678-9447

Page 44

AD-320 Basket (Tumbler)/Support Assemblies

Illus. No. Part No. Qty. Description

1 881573 1 AD-320 Basket (tumbler) and Support Assembly Complete with Felt Collar

(includes illus. nos. 1 through 11 and 13)

881575 1 AD-320 Stainless Steel Basket (tumbler) and Support Assembly Complete

with Felt Collar (includes illus. nos. 1 through 11 and 13)

881572 1 AD-320 Basket (tumbler) ONLY without Felt Collar

(includes illus. nos. 1, 2, and 3)

881574 1 AD-320 Stainless Steel Basket (tumbler) ONLY without Felt Collar

(includes illus. nos. 1, 2, and 3) 2 150309 30 #10-16 x 1/2 Hex Head TEK Crimptite Screw 3 301318 2 AD-320 Galvanized Short Basket (tumbler) Rib

301317 1 AD-320 Galvanized Tall Basket (tumbler) Rib 301418 2 AD-320 Stainless Steel Short Basket (tumbler) Rib

301417 1 AD-320 Stainless Steel Tall Basket (tumbler) Rib 4 150500 1 5/16-18 x 3/8 Socket Button Head Screw 5 100916 3 3/8-16 x 25 Tie Rod

(for models mfd. as of August 17, 1998)

100907 3 5/16-18 x 25 Tie Rod

(for models mfd. prior to August 17, 1998)

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Page 45

AD-320 Basket (Tumbler)/Support Assemblies (continued)

Illus. No. Part No. Qty. Description

6 153003 3 3/8 x 1-1/2 Fender Washer

(for models mfd. as of August 17, 1998)

153001 3 5/16 Flat Washer

(for models mfd. prior to August 17, 1998)

7 850067 1 AD-320 Basket (tumbler) Support ONLY

100812 1 1-3/8 E-Clip Retaining Ring...Not Illustrated

8 152005 3 3/8-16 Hex Nut

(for models mfd. as of August 17, 1998)

152004 3 5/16-18 Hex Nut

(for models mfd. prior to August 17, 1998)

9 153005 3 3/8 Lock Washer

(for models mfd. as of August 17, 1998)

153002 3 5/16 Lock Washer

(for models mfd. prior to August 17, 1998)

10 153004 3 3/8 x 1 Flat Washer

(for models mfd. as of August 17, 1998)

153001 3 5/16 Flat Washer

(for models mfd. prior to August 17, 1998)

11 115999 1 Felt Collar

401010 1 #847 Adhesive for Felt Collar (5 oz. tube) 12 100173 1 12-Rib 95 Belt 13 115992 1 Felt Collar

401010 1 #847 Adhesive for Felt Collar (5 oz. tube)

Telephone: (508) 678-9000 Fax: (508) 678-9447

Page 46

Basket (Tumbler) Brush Assembly

Illus. No. Part No. Qty. Description

1 170198 2 AD-330/AD-320 Drive Belt Sealing Brush

(for models mfd. as of December 6, 1993)

170195 2 AD-330/AD-320 Drive Belt Sealing Brush

(for models mfd. prior to December 6, 1993)

2 317656 2 AD-330/AD-320 Sealing Brush Clip End

(for models mfd. as of December 6, 1993)

317652 2 AD-330/AD-320 Sealing Brush Clip End

(for models mfd. prior to December 6, 1993) 3 154210 6 5/32 x 3/16 Pop Rivet 4 120117 2 3/8 EMT Hanger 5 317651 1 AD-330/AD-320 Wrapper Gasket Strip 6 102325 1 8-1/2 x 1-1/2 x 1/8 Wrapper Channel Gasket 7 154210 2 5/32 x 3/16 Pop Rivet 8 100173 1 12-Rib 95 Belt

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Page 47

Temperature Sensor Probe Assembly

Illus. No. Part No. Qty. Description

1 801409 1 AD-330/AD-320 Temperature Sensor Bracket Assembly Complete

(includes illus. nos. 1 through 9, 12, and 13) 2 150000 2 #6-32 x 1/4 Round Head Machine Screw 3 153010 2 #6 Star Washer 4 130106 1 170° Large Thermostat 5 152013 2 #6-32 Hex Nut 6 154007 2 1/4 Tinnerman Push On Fastener 7 880111 1 Dual Microprocessor Controller (DMC)

1/4 Temperature Sensor Probe Assembly

(includes illus. nos. 6 through 9) 8 122701 8 Socket Terminal ONLY 9 122605 2 4-Pin Socket Connector ONLY 10 122700 8 Pin Terminal ONLY 11 122604 2 4-Pin Connector ONLY

122801 1 Pin/Socket Extraction Tool...Not Illustrated 12 121405 2 Rubber Grommet 13 150301 2 #8-18 x 7/16 Phillips Pan Head TEK Screw

(for models mfd. as of February 11, 1997)

154060 2 Tinnerman S Clip

(for models mfd. prior to February 11, 1997)

Telephone: (508) 678-9000 Fax: (508) 678-9447

Page 48

Basket (Tumbler) Bearing Assembly

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Page 49

Basket (Tumbler) Bearing Assembly

Illus. No. Part No. Qty. Description

1 880203 1 1-3/8 Flange Bearing ONLY 2 153005 4 3/8 Lock Washer 3 152005 4 3/8-16 Hex Nut 4 882544 1 Pillow Block Bearing Assembly Complete

(includes illus. nos. 4 through 14 and 17)

882545 1 Bearing Assembly Complete

(includes illus. nos. 4 through 17)

For Models Mfd. with Rotational Sensor 882542 1 Bearing Support ONLY 882543 1 Bearing Support ONLY

(for models mfd. with rotational sensor)

5 880202 1 1-3/8 Pillow Block Bearing ONLY

880779* 1 1-3/8 Pillow Block Bearing

(for models mfd. with rotational sensor)

6 150601 2 3/8-16 x 2 Hex Bolt 7 153004 8 3/8 Flat Washer 8 153005 2 3/8 Lock Washer 9 152005 2 3/8-16 Hex Nut 10 154326 2 5/16-24 x 3/8 Setscrew (black) 11 152004 4 5/16-18 Hex Nut 12 150621 2 5/16-18 x 1-1/2 Tap Bolt 13 153002 4 5/16 Lock Washer 14 150501 4 5/16-18 x 3/4 Tap Bolt 15 102120 1 Sintered 8 Magnet 16 824807* 1 Rotational Sensor Assembly

(for models mfd. with rotational sensor)

17 150610 2 5/16-18 x 1-1/2 Allen Setscrew

* The rotational sensor is standard for models manufactured as of January 2, 2002. For models manufactured

prior to January 2, 2002 the rotational sensor is optional.

Telephone: (508) 678-9000 Fax: (508) 678-9447

Page 50

AD-330 Lint Drawer (Basket) Switch Assembly

Illus. No. Part No. Qty. Description

1 150006 2 #6-32 x 7/8 Round Head Machine Screw 2 802816 1 AD-330 Lint Drawer (basket) Switch Assembly Complete

(includes illus. nos. 1 through 4 and 7 through 9)

307204 1 AD-330 Lint Switch Mounting Bracket ONLY 3 136990 1 AD-330 Lint Drawer (basket) Safety Switch ONLY 4 152013 2 #6-32 Hex Nut 5 122604 2 4-Pin Connector ONLY 6 122700 4 Pin Terminal ONLY 7 122605 2 4-Pin Socket Connector ONLY 8 122701 4 Socket Terminal ONLY

122801 1 Pin/Socket Extraction Tool...Not Illustrated 9 824848 1 AD-330 Lint Switch Bottom Harness

(includes illus. nos. 7 through 9)

824849 1 AD-330 Lint Switch Top Harness

(includes illus. nos. 7 through 9) 10 150309 2 #10-16 x 1/2 Hex Head TEK Crimptite Screw 11 150309 2 #10-16 x 1/2 Hex Head TEK Crimptite Screw 12 307203 1 AD-330 Lint Switch Cover ONLY

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Page 51

AD-320 Lint Drawer (Basket) Switch Assembly

Illus. No. Part No. Qty. Description

1 304039 1 AD-320 Lint Door Switch Bracket/Cover 2 122605 2 4-Pin Socket Connector ONLY 3 122701 4 Socket Terminal ONLY 4 122604 2 4-Pin Connector ONLY 5 122700 4 Pin Terminal ONLY 6 136992 1 AD-320 Lint Drawer (basket) Safety Switch ONLY 7 150006 2 #6-32 x 7/8 Round Head Machine Screw 8 152013 2 #6-32 Hex Nut 9 824848 1 AD-320 Lint Switch Bottom Harness

824849 1 AD-320 Lint Switch Top Harness

10 150309 2 #10-16 x 1/2 Hex Head TEK Crimptite Screw

--- 122801 1 Pin/Socket Extraction Tool...Not Illustrated

Telephone: (508) 678-9000 Fax: (508) 678-9447

Page 52

Illus. No. Part No. Qty. Description

Totally Enclosed, Non-Vent (T.E.N.V.) Motor/Idler Assemblies

1 882910 1 AD-330/AD-320 Upper and Lower Idler Arm ONLY

801019 1 AD-330/AD-320 Upper and Lower Idler Arm Assembly with Hardware

(includes illus. nos. 1 through 10) 2 121350 1 13/32 x 3/8 I.D. Bronze 3 154266 1 3/8 x 3/8 Shoulder Screw

(for models mfd. as of March 25, 2002)

154277 1 3/8 x 1/2 Shoulder Bolt

(for models mfd. prior to March 25, 2002) 4 100250 1 AD-330/AD-320 Back Side Idler Assembly 5 150600 1 3/8-16 x 1-1/2 Hex Head Machine Bolt 6 157010 1 1-7/8 Extension Spring 7 154276 1 1/4-20 x 5/8 Shoulder Bolt 8 154275 1 3/8-16 x 3-3/8 Spade Bolt 9 152005 2 3/8-16 Hex Nut 10 153005 1 3/8 Lock Washer 11 850135 1 AD-330/AD-320 Idler Angle

(for models mfd. as of March 25, 2002)

883308 1 AD-330/AD-320 Idler Angle

(for models mfd. prior to March 25, 2002)

(includes illus. nos. 3 and 11) 12 153001 2 5/16 Flat Washer 13 153002 2 5/16 Lock Washer 14 150501 2 5/16-18 x 3/4 Hex Head Machine Bolt 15 153001 2 5/16 Flat Washer 16 153002 2 5/16 Lock Washer 17 150501 2 5/16-18 x 3/4 Hex Head Machine Bolt 18 100064 1 1/3 HP 120/230v 1ø 60 Hz Totally Enclosed, Non-Vent (T.E.N.V.) Motor

with Plug

100049 1 1/3 HP 100-230v 1ø 50 Hz Totally Enclosed, Non-Vent (T.E.N.V.) Motor

with Plug 19 101097 1 AD-330/AD-320 Rear Motor Shaft Bushing (for 60 Hz models)

101099 1 AD-330/AD-320 Rear Motor Shaft Bushing (for 50 Hz models)

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Page 53

Totally Enclosed, Non-Vent (T.E.N.V.) Motor/Idler Assemblies (continued)

Illus. No. Part No. Qty. Description

20 154327 1 1/4-20 x 3/8 Socket Setscrew 21 101096 1 AD-330/AD-320 Front Motor Shaft Bushing (50/60 Hz) 22 153024 1 #10 Lock Washer 23 150216 1 #10-32 x 3/4 Left Hand Phillips Round Head Screw 24 154279 4 5/16-18 x 3/4 Carriage Bolt 25 800917 1 AD-330/AD-320 Motor Mount ONLY

803918 1 1/3 HP 120/230v 1ø 60 Hz Totally Enclosed, Non-Vent (T.E.N.V.) Motor

Mount Assembly Complete (includes illus. nos. 11 through 28 and 31)

803926 1 1/3 HP 120/230v 1ø 50 Hz Totally Enclosed, Non-Vent (T.E.N.V.) Motor

Mount Assembly Complete (includes illus. nos. 11 through 28 and 31)

801053 1 1/3 HP 200/230v 1ø 50 Hz Motor Mount Assembly

(includes illus. nos. 11 through 28 and 31)

For Models Mfd. as of October 24, 2000 26 153001 4 5/16 Flat Washer 27 153002 4 5/16 Lock Washer 28 152004 4 5/16-18 Hex Nut 29 137030 1 8-Pin Housing 30 122701 8 Socket Terminal ONLY

122801 1 Pin/Socket Extraction Tool...Not Illustrated 31 116010 1 AD-330/AD-320 Felt Motor Seal ONLY 32 150501 4 5/16-18 x 3/4 Hex Head Machine Bolt 33 153002 4 5/16 Lock Washer 34 153001 4 5/16 Flat Washer 35 100173 1 12-Rib 95 Belt 36 117604 3 Neoprene Sponge Tape (sold by the foot)

For Models Mfd. as of March 6, 1998

117600 3 Noise Suppressor Tape (sold by the foot)

For Models Mfd. prior to March 6, 1998 37 153054 1 AD-330/AD-320 Motor Washer (for 50 Hz models) 38 100705 1 3/16 x 3/16 x 1-3/8 Key 39 100608 1 12-1/2 Impellor with 3/4 Bore (for 60 Hz models)

100620 1 12-1/2 Impellor with 5/8 Bore (for 50 Hz models)

40 153051 1 3/4 Flat Washer (for 60 Hz models)

153054 1 AD-330/AD-320 Motor Washer (for 50 Hz models)

41 153040 1 3/4 Lock Washer (for 60 Hz models)

153015 1 5/8 Lock Washer (for 50 Hz models)

42 152025 1 3/4-16 Jam Nut (for 60 Hz models)

152030 1 5/8-18 Jam Nut (for 50 Hz models) 43 153525 2 1/4-20 x 1 Self Clinching Stud 44 850132 1 AD-330/AD-320 Bearing Backup Plate

(includes illus. nos. 43 and 44)

852104 1 AD-330/AD-320 Bearing Backup Plate Assembly

(includes illus. nos. 43, 44, and 46 through 48) 45 880885 1 AD-330/AD-320 Impellor Cover 46 116011 1 AD-330/AD-320 Bearing Felt Seal 47 153007 2 1/4 Lock Washer 48 152002 2 1/4-20 Hex Nut 49 880225 1 1/2 Flange Bearing 50 152014 4 1/4-20 Free Spin Wash Nut 51 314423 1 AD-330/AD-320 Belt Guard 52 150212 2

#10-32 x 5/16 Phillips Pan Head Stainless Steel Screw

Telephone: (508) 678-9000 Fax: (508) 678-9447

Page 54

AD-330 Gas Train Assembly

For Models Mfd. as of April 17, 2000 with Johnson Controls Direct Spark Ignition (DSI) Module

Illus. No. Part No. Qty. Description

1 141130 1 Direct Spark Ignition (DSI) Up-Shot Burner Tube ONLY 2 128917 1 Spark Ignitor with 36 Wire 3 128918 1 Flame Sensor 4 318009 1 Burner Tube Bracket (PSE) 5 140856** 1 #23 Burner Orifice (natural gas) ONLY

140810** 1 #42 Burner Orifice (liquid propane [L.P.] gas) ONLY 6 141225 1 Single-Port Manifold 7 318700 1 Pipe Bracket 8 882721* 1 Direct Spark Ignition (DSI) Natural Gas Train Assembly Complete

(includes illus. nos. 1 through 4, 6 through 25, and 29 through 31)

882722* 1 Direct Spark Ignition (DSI) Liquid Propane (L.P.) Gas Train Assembly

Complete (includes illus. nos. 1 through 4, 6 through 25, and 29 through 31)

319522 1 Gas Valve Train Slide ONLY

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Page 55

AD-330 Gas Train Assembly (continued)

For Models Mfd. as of April 17, 2000 with Johnson Controls Direct Spark Ignition (DSI) Module

Illus. No. Part No. Qty. Description

9 318711 1 Notched Pipe Bracket 10 128935 1 Direct Spark Ignition (DSI) Module ONLY (Johnson Controls) 11 152013 2 #6-32 Hex Nut 12 121300 2 Open/Closed Bushing 13 150301 2 #8-18 x 7/16 Phillips Pan Head TEK Screw 14 121491 3 5/8 White Nylon Clamp 15 121492 3 3/16 Plastic Clip 16 128927 1 1/2 24 VAC Direct Spark Ignition (DSI) Redundant (natural gas) Valve

880960 1 Direct Spark Ignition (DSI) Gas Valve (liquid propane [L.P.] gas) ONLY 17 142506 1 1/2 x 1/2 Street Elbow 18 318712 1 Pipe Bracket 19 882157 1 1/4 Aluminum (12 length) 20 143203 1 Aluminum Tubing Adapter 21 143259 1 Aluminum Tubing Compression Fitting 22 151001 8 #8-32 Pal Nut 23 152001 3 #8-32 x 3/8 Hex Nut 24 153528 9 #8-32 x 1/2 Self Clinching Stud 25 815974 1 Direct Spark Ignition (DSI) Module Mounting Bracket (Johnson) 26 881367 1 1/2 Union Shut Off with Tail Piece 27 142805 1 1/2 x 34-1/2 Pipe 28 142934 1 1/2 Coupling with Mounting Tabs 29 150315 2 #6 x 3/8 Phillips Pan Head Type B Screw 30 122605 1 4-Pin Socket Connector ONLY

122801 1 Pin/Socket Extraction Tool...Not Illustrated 31 122701 2 Socket Terminal ONLY 32 122604 1 4-Pin Connector ONLY 33 122700 2 Pin Terminal ONLY

-- 880145** 1 ADG-330 Direct Spark Ignition (DSI) Liquid Propane (L.P.)

Conversion Kit

* Orifice is not included and must be ordered separately. ** Consult factory for elevations over 2,000 feet.

Telephone: (508) 678-9000 Fax: (508) 678-9447

Page 56

AD-330 Gas Valve Train Assembly

For Models Mfd. prior to April 17, 2000

Illus. No. Part No. Qty. Description

1 142506 1 1/2 x 1/2 Street Elbow 2 122700 2 Pin Terminal ONLY 3 122604 1 4-Pin Connector ONLY 4 881367 1 1/2 Union Shut Off with Tail Piece 5 318712 1 Pipe Bracket 6 150309 2 #10-16 x 1/2 Hex Head TEK Crimptite Screw 7 143259 1 Aluminum Tubing Compression Fitting 8 143100 1 1/4 Aluminum Tubing (sold by the foot) 9 143203 1 Aluminum Tubing Adapter 10 128927 1 1/2 24 VAC Direct Spark Ignition (DSI) Redundant (natural gas) Valve

140411 1 Direct Spark Ignition (DSI) Liquid Propane (L.P.) Gas Valve

Conversion Kit 11 122701 2 Socket Terminal ONLY 12 122605 1 4-Pin Socket Connector ONLY

122801 1 Pin/Socket Extraction Tool...Not Illustrated

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Page 57

AD-330 Gas Valve Train Assembly (continued)

For Models Mfd. prior to April 17, 2000

13 842716 1 AD-330 Gas Valve Train Wiring (top gas train)

842724 1 AD-330 Gas Valve Train Wiring (bottom gas train) 14 882627 1 Direct Spark Ignition (DSI) Module with Bracket 15 882605 1 Direct Spark Ignition (DSI) Module Mounting Bracket ONLY 16 153017 4 #6 Star Washer 17 151000 4 #6-32 Pal Nut 18 153528 2 #8-32 x 1/2 Self Clinching Stud 19 153012 2 #8 Star Washer 20 152001 2 #8-32 x 3/8 Hex Nut 21 318711 1 Notched Pipe Bracket 22 121060 4 5/8 Clear Flextite 23 121492 3 3/16 Plastic Clip 24 141225 1 Single-Port Manifold 25 318700 1 Pipe Bracket 26 121491 3 5/8 White Nylon Clamp 27 801020* 1 ADG-330 (natural gas) Gas Valve Train Assembly Complete Less Orifice

(includes illus. nos. 1 through 3 and 5 through 36)

319522 1 Gas Valve Train Slide ONLY 28 153528 9 #8-32 x 1/2 Self Clinching Stud 29 153012 16 #8 Star Washer 30 318009 1 Burner Tube Bracket (PSE) 31 151001 8 #8-32 Pal Nut 32 141130 1 Direct Spark Ignition (DSI) Up-Shot Burner Tube ONLY 33 128917 1 Spark Ignitor with 36 Wire 34 150315 2 #6 x 3/8 Phillips Pan Head Type B Screw 35 128918 1 Flame Sensor 36 121300 2 Open/Closed Bushing 37** 140856 1 #23 Burner Orifice (natural gas) ONLY

140810 1 #42 Burner Orifice (liquid propane [L.P.] gas) ONLY

-- 880145** 1 ADG-330 Direct Spark Ignition (DSI) Liquid Propane (L.P.)

Conversion Kit

* Orifice is not included and must be ordered separately. ** Consult factory for elevations over 2,000 feet.

Telephone: (508) 678-9000 Fax: (508) 678-9447

Page 58

AD-320 Gas Train Assembly

For Models Mfd. as of April 17, 2000 with Johnson Controls Direct Spark Ignition (DSI) Module

Illus. No. Part No. Qty. Description

1 141130 1 Direct Spark Ignition (DSI) Up-Shot Burner Tube ONLY 2 128917 1 Spark Ignitor with 36 Wire 3 128918 1 Flame Sensor 4 318009 1 Burner Tube Bracket (PSE) 5 140823** 1 #26 Burner Orifice (natural gas) ONLY

140809** 1 #43 Burner Orifice (liquid propane [L.P.] gas) ONLY 6 141245 1 Single-Port Manifold 7 318700 1 Pipe Bracket 8 882723* 1 Direct Spark Ignition (DSI) Natural Gas Train Assembly Complete

(includes illus. nos. 1 through 4, 6 through 25, and 29 through 31)

882724* 1 Direct Spark Ignition (DSI) Liquid Propane (L.P.) Gas Train Assembly

Complete (includes illus. nos. 1 through 4, 6 through 25, and 29 through 31)

319525 1 Gas Valve Train Slide ONLY

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Page 59

AD-320 Gas Train Assembly

For Models Mfd. as of April 17, 2000 with Johnson Controls Direct Spark Ignition (DSI) Module

Illus. No. Part No. Qty. Description

880960 1 Direct Spark Ignition (DSI) Gas Valve (liquid propane [L.P.] gas) ONLY 17 142506 1 1/2 x 1/2 Street Elbow 18 318712 1 Pipe Bracket 19 882157 1 1/4 Aluminum (12 length) 20 143203 1 Aluminum Tubing Adapter 21 143259 1 Aluminum Tubing Compression Fitting 22 151001 8 #8-32 Pal Nut 23 152001 3 #8-32 x 3/8 Hex Nut 24 153528 9 #8-32 x 1/2 Self Clinching Stud 25 815974 1 Direct Spark Ignition (DSI) Module Mounting Bracket (Johnson) 26 881367 1 1/2 Union Shut Off with Tail Piece 27 142809 1 1/2 x 29-1/8 Pipe 28 142934 1 1/2 Coupling with Mounting Tabs 29 150315 2 #6 x 3/8 Phillips Pan Head Type B Screw 30 122605 1 4-Pin Socket Connector ONLY

122801 1 Pin/Socket Extraction Tool...Not Illustrated 31 122701 2 Socket Terminal ONLY 32 122604 1 4-Pin Connector ONLY 33 122700 2 Pin Terminal ONLY

-- 874060** 1 ADG-320 Direct Spark Ignition (DSI) Liquid Propane (L.P.)

Conversion Kit

* Orifice is not included and must be ordered separately. ** Consult factory for elevations over 2,000 feet.

Telephone: (508) 678-9000 Fax: (508) 678-9447

Page 60

AD-320 Gas Valve Train Assembly

For Models Mfd. prior to April 17, 2000

Illus. No. Part No. Qty. Description

140411 1 Direct Spark Ignition (DSI) Liquid Propane (L.P.) Gas Valve

Conversion Kit 11 122701 2 Socket Terminal ONLY 12 122605 1 4-Pin Socket Connector ONLY

122801 1 Pin/Socket Extraction Tool...Not Illustrated

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Page 61

AD-320 Gas Valve Train Assembly

For Models Mfd. prior to April 17, 2000

Illus. No. Part No. Qty. Description

13 842716 1 AD-320 Gas Valve Train Wiring (top gas train)

842724 1 AD-320 Gas Valve Train Wiring (bottom gas train) 14 882627 1 Direct Spark Ignition (DSI) Module with Bracket 15 882605 1 Direct Spark Ignition (DSI) Module Mounting Bracket ONLY 16 153017 4 #6 Star Washer 17 151000 4 #6-32 Pal Nut 18 153528 2 #8-32 x 1/2 Self Clinching Stud 19 153012 2 #8 Star Washer 20 152001 2 #8-32 x 3/8 Hex Nut 21 318711 1 Notched Pipe Bracket 22 121060 4 5/8 Clear Flextite 23 121492 3 3/16 Plastic Clip 24 141245 1 Single-Port Manifold 25 318049 1 Pipe Bracket 26 121491 3 5/8 White Nylon Clamp 27* 801023 1 ADG-320 (natural gas) Gas Valve Train Assembly Complete Less Orifice

(includes illus. nos. 1 through 3 and 5 through 36)

319525 1 Gas Valve Train Slide ONLY 28 153528 9 #8-32 x 1/2 Self Clinching Stud 29 153012 16 #8 Star Washer 30 318009 1 Burner Tube Bracket (PSE) 31 151001 8 #8-32 Pal Nut 32 141130 1 Direct Spark Ignition (DSI) Up-Shot Burner Tube ONLY 33 128917 1 Spark Ignitor with 36 Wire 34 150315 2 #6 x 3/8 Phillips Pan Head Type B Screw 35 128918 1 Flame Sensor 36 121300 2 Open/Closed Bushing 37** 140823 1 #26 Burner Orifice (natural gas) ONLY

140809 1 #43 Burner Orifice (liquid propane [L.P.] gas) ONLY

-- 874060** 1 ADG-320 Direct Spark Ignition (DSI) Liquid Propane (L.P.)

Conversion Kit

* Orifice is not included and must be ordered separately. ** Consult factory for elevations over 2,000 feet.

Telephone: (508) 678-9000 Fax: (508) 678-9447

Page 62

Electric Oven Assembly

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Page 63

Electric Oven Assembly

Illus. No. Part No. Qty. Description

1 150300 4 #10-16 x 1/2 Hex Washer TEK Screw 2 318065 1 Burner Box Clean Out Plate 3 320656 1 Back Plate Cover 4 150302 5 #6 x 3/8 Phillips Pan Head TEK Screw 5 --------- 6 Heating Elements

(refer to Electric Oven Component Chart on 6 319703 1 Hi-Limit Bracket 7 151001 2 #8-32 Pal Nut 8 130400 1 290º Thermostat 9 320653 1 ADE-330/ADE-320 Stainless Steel Electric Reflector 10 318651 1 ADE-330/ADE-320 Oven Wire Bracket 11 150300 2 #10-16 x 1/2 Hex Washer TEK Screw 12 137027 1 Strain Relief 13 320655 1 ADE-330/ADE-320 Contactor Bracket 14 152014 1 1/4-20 Free Spin Wash Nut 15 121010 1 L-70 Terminal Lug 16 112075 1 GROUND HERE Label 17 --------- 1 Oven Contactor

(refer to Electric Oven Component Chart on 18 824828 1 RC Network with Connectors 19 121011 * Bus Bar 20 153009 15 #10 Star Washer 21 150212 15 #10-32 x 5/16 Phillips Pan Head Stainless Steel Screw 22 --------- * Terminal Lug

(refer to Electric Oven Component Chart on page 69) 23* 150309 4 #10-16 x 1/2 Hex Head TEK Crimptite Screw

page 69)

* As required.

Telephone: (508) 678-9000 Fax: (508) 678-9447

Page 64

Burner Box/Piping Assemblies

Illus. No. Part No. Qty. Description

1 881367 1 1/2 Union Shut Off with Tail Piece 2 142805 1 1/2 x 34-1/2 Pipe (for ADG-330 Only)

142809 1 1/2 x 29-1/8 Pipe (for ADG-320 Only) 3 318700 1 Pipe Bracket 4 150300 2 #10-16 x 1/2 Hex Washer TEK Screw 5 130403 1 330º Burner Hi-Limit Thermostat 6 150300 2 #10-16 x 1/2 Hex Washer TEK Screw 7 150309 8 #10-16 x 1/2 Hex Head TEK Crimptite Screw 8 130403 1 330º Burner Hi-Limit Thermostat 9 150300 2 #10-16 x 1/2 Hex Washer TEK Screw 10 881367 1 1/2 Union Shut Off with Tail Piece 11 142805 1 1/2 x 34-1/2 Pipe (for ADG-330 Only)

142809 1 1/2 x 29-1/8 Pipe (for ADG-320 Only) 12 318700 1 Pipe Bracket 13 150300 2 #10-16 x 1/2 Hex Washer TEK Screw 14 850854 2 ADG-330/ADG-320 Burner Box without Flame Spreader 15 850912 2 ADG-330/ADG-320 Flame Spreader 16 --------- - Sail Switch

(refer to Sail Switch Assembly on page 64)

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Page 65

ADS-330/ADS-320 Steam Damper Assembly

Illus. No. Part No. Qty. Description

1 850875 1 ADS-330/ADS-320 Steam Damper Assembly 2 100532 1 Pivot Bracket with Pin 3 100540 1 Steam Damper Piston (cylinder) Assembly

(includes illus. nos. 3 and 5 through 11)

100530 1 9/16 Bore x 2 Stroke Piston 4 100531 1 Piston Clevis 5 115994 1 Needle Valve Gasket 6 100471 1 1/4 x 10/32 (male) Connector 7 100534 1 Needle Valve 8 143110 1 1/4 Poly-Flo Tubing 9 100472 1 1/4 Poly x 1/8 M.P.T. Connector 10 100498 1 3-Way Micro Valve 11 100520 1 1/8 N.P.T. Silencer (muffler) 12 150002 2 #6-32 x 1 Round Head Machine Screw 13 122701 2 Socket Terminal ONLY 14 122605 1 4-Pin Socket Connector ONLY

122801 1 Pin/Socket Extraction Tool...Not Illustrated 15 100532 1 Pivot Bracket with Pin 16 153560 8 #6-32 x 1/2 Self-Clinching Stud 17 153008 10 #6 Lock Washer 18 152013 10 #6-32 Hex Nut 19 165035 1 ADS-330/ADS-320 Steam Coil Assembly

Telephone: (508) 678-9000 Fax: (508) 678-9447

Page 66

Sail Switch Assembly

Illus. No. Part No. Qty. Description

1 319206 1 Sail Switch Damper (embossed)

802805 1 AD-330/AD-320 Sail Switch Rod and Damper Assembly

(includes illus. nos. 1, 2, and 3) 2 105550 1 AD-330/AD-320 Sail Switch Rod 3 154002 1 1/8 Push On Fastener 4 150303 2 #4 x 3/4 Pan Head A Machine Screw 5 122200 1 Sail Switch ONLY

802807 1 AD-330/AD-320 Sail Switch Bracket Assembly

(includes illus. nos. 4 through 7) 6 319208 1 AD-330/AD-320 Sail Switch Bracket 7 154004 1 Twin Speed Nut 8 150001 2 #6-32 x 1/2 Round Head Machine Screw 9 153010 2 #6 Star Washer 10 152000 2 #6-32 Hex Nut

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Page 67

Back Guard Assemblies

Illus. No. Part No. Qty. Description

1 315014 1 Top Electric Box Cover Plate 2 150309 2 #10-16 x 1/2 Hex Head TEK Crimptite Screw 3 314404 1 AD-330/AD-320 Top Upper Guard 4 314405 1 AD-330/AD-320 Top Lower Guard 5 314404 1 AD-330/AD-320 Bottom Upper Guard 6 314405 1 AD-330/AD-320 Bottom Lower Guard 7 103500 4 Adjustable Leveling Leg 8 150309 22 #10-16 x 1/2 Hex Head TEK Crimptite Screw

Telephone: (508) 678-9000 Fax: (508) 678-9447

Page 68

Optional Gas Piping and Exhaust Ducting Kits

ADG-330/ADG-320 Optional Gas Piping Kit

Illus. No. Part No. Qty. Description

--- 880128 1 ADG-330/ADG-320 Gas Piping Kit

(includes illus. nos. 1 through 12) 1 142821 1 3/4 x 36 Pipe 2 142505 1 3/4 x 1/2 x 1/2 Tee 3 142814 1 1/2 x 2-1/2 Nipple 4 142600 1 1/2 Union 5 142824 1 1/2 x 37-1/4 Pipe 6 142500 1 1/2 x 90º Elbow 7 142814 1 1/2 x 2-1/2 Nipple 8 142600 1 1/2 Union 9 142700 1 1/2 Close Nipple 10 143001 1 1/2 Coupling 11 142700 1 1/2 Close Nipple 12 143001 1 1/2 Coupling

ADG-330/ADG-320 Optional Exhaust Ducting Kit

--- 882035 1 AD-330/AD-320 Exhaust Ducting Kit

(includes illus. nos. 13 through 16) 13 143600 1 10 x 6 x 6 Wye Branch Duct 14 143519 1 6 Round x 4 Long Flexible Exhaust Duct 15 143509 1 6 Round x 8 Long Flexible Exhaust Duct 16 143536 2 6 Round x 45º Elbow

--- 150300* 12 #10-16 x 1/2 Hex Washer TEK Screw

--- 117505* 12 Aluminum Duct Tape (sold by the foot)

* Included with Exhaust Ducting Kit (ADC Part No. 882035).

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Page 69

12-Rib 95 (J) Poly Belt Arrangement

Telephone: (508) 678-9000 Fax: (508) 678-9447

Page 70

Bottom Exhaust Duct Assembly and Cabinet Hi-Limit

Illus. No. Part No. Qty. Description

1 143536 2 6 Round x 45º Elbow 2 143545 1 6 Round x 6 Long Duct

- 117505* 5 Aluminum Duct Tape (sold by the foot) 3 130107 2 Cabinet Hi-Limit 160° 4 150301 4 #8-18 x 7/16 Phillips Pan Head Screw

* Tape ALL joints.

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Page 71

Telephone: (508) 678-9000 Fax: (508) 678-9447

Electric Oven Component Chart

NEVO

EZIS

)WK(

51802ø1 4#05908865.26300219210121'6JAEE073131 51042 ø14#15908865.20400219210121'6JAEE073131 51802 ø36#25908865.26300219210121'2DERAUQS753131 51042 ø36#35908865.20400219010121'2DERAUQS253131 51083 ø38#+01#45908865.28300215010121'2DERAUQS253131 51614 ø38#+01#55908865.26300215010121'2DERAUQS253131

* Electric oven assembly complete does not include oven relay (contactor). This item must be ordered separately. When ordering electric oven

assembly complete specify 3 wire or 4 wire when applicable.

ECIVRES

EGATLOV

ESAHP

ERIW

EZIS

CIRTCELE

STNEMELE

NEVO

*YLBMESSA

.YTQ

EZIS

.ONTRAP.YTQ.ONTRAP

LANIMRET

GUL

SUB

RAB

.ONTRAP

110211

.ON.TAC.ONTRAP

CIRTCELE

YALERNEVO

Page 72

Step Down Transformer Usage Listing

ST EP D OWN T RANSF O RMER USAGE LI ST ING

HEAT V OLTAGE PHASE

208 1ø 2 132063 240 1ø 2 132070 208 3ø 3 or 4 141403

ELECTRIC

240 3ø 3 or 4 141403 380 3ø 3 or 4 141403

460/480 3ø 3 or 4 141403

WIRE

SERVICE

TRANSFORMER

PART NUMBER

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Page 73

Additional Parts Available

Part No. Description

100405 Bearing Puller (for fan [impellor] shaft bearing) 112039 Black/White/Green Ground Label 112119 Phase 5 Dual Microprocessor Controller (DMC) Users Manual 112144 AD-330/AD-320 Installation Manual 112530 Program Location Summary Coin Label 114001 CAUTION - Exhaust/Lint Screen Label 114006 WARNING - Fire Hazards Label 120802 Red Butt Connector 120903 #74B Wire Nut 121014 Crimp-On Wire Nut 121499 5-1/2 Harness Tie 121500 8 Harness Tie 121503 Harness Tie Mounting Clip 112804 Manometer (hydro gauge) for Measuring Gas Pressure 112280 Lint Compartment Label 404500 Almond Brush-In-Cap Bottle Touch-Up Paint 404502 White Brush-In-Cap Bottle Touch-Up Paint 404506 Beige Brush-In-Cap Bottle Touch-Up Paint 404507 Cornflower Blue Brush-In-Cap Bottle Touch-Up Paint 404515 Coral Blue Brush-In-Cap Bottle Touch-Up Paint 404516 Ivory Brush-In-Cap Bottle Touch-Up Paint 410001 1/2 Allen Wrench (for gas valve tail piece removal) 450403 ADG-320D and ADG-330 Service Procedures 450142 ADC Direct Spark Ignition (DSI) Technical Manual 450426 Johnson Controls Direct Spark Ignition (DSI) Technical Manual 880200 Electrical Terminal (assortment) Kit 880884 Basket (tumbler) Puller Assembly 881299 Loctite Adhesive Kit (for setscrews)

Telephone: (508) 678-9000 Fax: (508) 678-9447

Page 74

ADC 450113 1 - 06/10/92-250 2 - 10/19/92-100 3*02/25/93-100

4*04/23/93-100 5* 07/22/93-100 6*11/09/93-100

7*01/05/94-100 8* 03/22/94-100 9*07/01/94-100 10 - 11/30/94-200 11 * 10/23/95-200 12 - 03/20/96-200 13 * 01/14/97-200 14 * 08/29/97-100 15 * 01/28/98-200 16 - 09/01/99-30 17 * 12/01/99-50 18 - 02/04/00-50 19 * 02/18/00-50 20 - 06/22/00-25 21 * 07/20/00-25 22 - 09/26/00-75 23 - 03/19/01-25 24 * 08/27/01-30 25 * 01/04/02-25 26 - 01/21/02-25 27 * 03/29/02-25

28 * 06/13/02-25