American Dryer Corp AD-295, AD-26 User Manual

AD-26 / AD-295AD-26 / AD-295

AD-26 / AD-295

AD-26 / AD-295AD-26 / AD-295

P P

P

P P

arar

ar

arar

24 VAC Phase 5

T elephone: [phone] / Fax: [phone]

ts Mants Man

ts Man

ts Mants Man

1992 thru 1998

American Dryer Corporation

88 Currant Road

Fall River, MA 02720-4781

E-mail: [e-mail]

www .amdry .com

ualual

ual

ualual

ADC Part No. 450122

Retain This Manual In A Safe Place For Future Reference

American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this

product is properly maintained, it will provide many years of safe, efficient, and trouble-free operation.

ONLY properly licensed technicians should service this equipment.

OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation/operator's
manual included with the dryer.

WARNING: UNDER NO CIRCUMSTANCES should the door switch or the heat circuit

devices ever be disabled.

WARNING: The dryer must never be operated with any of the back guards, outer tops, or

service panels removed. PERSONAL INJURY or FIRE COULD RESULT.

We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the
right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material,
and to change or discontinue models.

Important

For your convenience, log the following information:

DATE OF PURCHASE ________________________________________ MODEL NO. _______________________________

DISTRIBUTORS NAME __________________________________________________________________________________

Serial Number(s) ________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

Replacement parts can be obtained from your distributor or the ADC factory . When ordering replacement parts
from the factory, you can FAX your order to ADC at [phone] or telephone your orders directly to the
ADC Parts Department at [phone]. Please specify the dryer model number and serial number in
addition to the description and part number, so that your order is processed accurately and promptly.The
illustrations on the following pages may not depict your particular dryer exactly .

The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts
thoroughly before ordering.

INSTRUCTIONS TO BE FOLLOWED IN THE EVENT THE USER

SMELLS GAS MUST BE POSTED IN A PROMINENT LOCA TION. THE
INSTRUCTIONS TO BE POSTED SHALL BE OBT AINED FROM THE
LOCAL GAS SUPPLIER.

Table of Contents

Coin Control Door Assembly For Models Mfd. as of March 21, 1997 .................................................2

Coin Control Door Assembly For Models Mfd. prior to March 21, 1997 ..............................................3

Non-Coin Control Door Assembly For Models Mfd. as of March 21, 1997..........................................4

Non-Coin Control Door Assembly For Models Mfd. prior to March 21, 1997.......................................5

Dual Timer Control Door Assembly For Models Mfd. as of March 21, 1997 .......................................6

Dual Timer Control Door Assembly For Models Mfs. prior to March 21, 1997 ....................................7

Single Coin Microprocessor Control Panel Assembly For Models Mfd. as of April 11, 1996...............8

Single Coin Microprocessor Control Panel Assembly for Single Coin 25¢ Models Only ....................9

Dual Coin Microprocessor Control Panel Assembly .........................................................................10

Non-Coin Microprocessor Control Panel Assembly.......................................................................... 11

Microprocessor Control Box Assembly.............................................................................................12

25¢ Coin Acceptor Listing .................................................................................................................13

Dual Coin Acceptor Component Listing for Export Models Only.................................................14, 15

Dual Timer Control Panel Assembly .................................................................................................16

Non-Microprocessor Coin Control Panel Assembly..........................................................................17

Non-Microprocessor Control Box Assembly.....................................................................................18

Main Door Assembly .........................................................................................................................19

Main Door Switch Assembly .............................................................................................................20

Coin V ault Assembly .........................................................................................................................21

Coin Front Panel Assembly...............................................................................................................22

Non-Coin Front Panel Assembly.......................................................................................................23

Lint Door Assembly...........................................................................................................................24

Lint Basket / Lint Switch Assemblies ................................................................................................25

AD-26 Tumbler / Support Assemblies For Models Mfd. as of August 17, 1998.................................26

AD-26 Tumbler / Support Assemblies For Models Mfd prior to August 17, 1998 ..............................27

AD-295 Tumbler / Support Assemblies For Models Mfd. as of November 2, 1998 ...........................28

AD-295 Tumbler / Support Assemblies For Models Mfd. prior to November 2, 1998 ........................29

Tumbler Brush Assembly..................................................................................................................30

Microprocessor Temperature Sensor Bracket Assembly .................................................................31

Non-Microprocessor Temperature Sensor Bracket Assembly..........................................................32

Sail Switch Assembly........................................................................................................................33

Tumbler Bearing Assembly .........................................................................................................34, 35

T otally Enclosed, Non-V ent Motor / Idler Assemblies...................................................................36, 37

Upshot Burner Assembly ............................................................................................................38, 39

Back Guard Assembly.......................................................................................................................40

12-Rib 120" (J) Poly Belt Arrangement .............................................................................................41

Upshot Burner Assembly Specifications ...........................................................................................42

Additional Parts Available ..................................................................................................................43

AD-26/AD-295 Coin Control Door Assembly

For Models Mfd. as of March 21, 1997

Illus. No. Part No. Qty. Description

1 881585 1 AD-26/AD-295 Coin Control Door with Trim Less Locks

(includes illus. nos. 1, 5, and 6)

881583 1 AD-26/AD-295 Stainless Steel Coin Control Door with T rim Less Locks

(includes illus. nos. 1, 5, and 6)

2 112350 1 ADC Logo Only

870011 1 Logo Double Stick T ape Kit

®

3 160040 2 ACE
4 160140 - ACE

Lock Assembly Only

®

Key Only

(key number XX4451)
5 180315 1 AD-26/AD-295 Lower Control Door Trim
6 150310 5 #8 x 1/2" Phillips Pan Head "A" Screw
7 150300 4 #10 x 1/2” Hex Washer TEK Screw

* Specify color when ordering.

2 American Dryer Corporation 450122-6

Coin Control Door Assembly

For Models Mfd. prior to March 21, 1997

Illus. No. Part No. Qty. Description

1 880236 1 AD-26/AD-295 Coin Control Door with Trim Less Locks

(includes illus. nos. 1, 5, and 6)

850414 1 AD-26/AD-295 Coin Control D

2 112350 1 ADC Logo Only

870011 1 Logo Double Stick T ape Kit

®

3 160040 1 ACE
4 160140 - ACE

Lock Assembly Only

®

Key Only

(key number XX4451)
5 180315 1 AD-26/AD-295 Lower Control Door Trim
6 150310 5 #8 x 1/2" Phillips Pan Head "A" Screw

* Specify color when ordering.

450122-6 Telephone: [phone] / www.amdry.com 3

Non-Coin Control Door Assembly

For Models Mfd. as of March 21, 1997

Illus. No. Part No. Qty. Description

1 881586 1 AD-26/AD-295 Non-Coin Control Door with Trim Less Locks

(includes illus. nos. 1, 5, and 6)

2 112350 1 ADC Logo Only

870011 1 Logo Double Stick Tape Kit
3 160040 2 ACE® Lock Assembly Only
4 160140 - ACE® Key Only

(key number XX4451)
5 180315 1 AD-26/AD-295 Lower Control Door Trim
6 150310 5 #8 x 1/2" Phillips Pan Head "A" Screw
7 150300 4 #10 x 1/2” Hex Washer TEK Screw

* Specify color when ordering.

4 American Dryer Corporation 450122-6

Non-Coin Control Door Assembly

For Models Mfd. prior to March 21, 1997

Illus. No. Part No. Qty. Description

1 880918* 1 AD-26/AD-295 Non-Coin Control Door with T rim Less Locks

(includes illus. nos. 1, 5, and 6)

880917* 1 AD-26/AD-295 Non-Coin Control Door Only

2 112350 1 ADC Logo Only

870011 1 Logo Double Stick Tape Kit
3 160040 1 ACE® Lock Assembly Only
4 160140 - ACE® Key Only

(key number XX4451)
5 180315 1 AD-26/AD-295 Lower Control Door Trim
6 150310 5 #8 x 1/2" Phillips Pan Head "A" Screw

* Specify color when ordering.

450122-6 Telephone: [phone] / www.amdry.com 5

Dual T imer Contr ol Door Assembly

For Models Mfd. as of March 21, 1997

Illus. No. Part No. Qty. Description

1 881596 1 AD-26/AD-295 Coin Control Door with Trim Less Locks

(includes illus. nos. 1, 5, and 6)

2 112350 1 ADC Logo Only

870011 1 Logo Double Stick Tape Kit
3 160040 2 ACE® Lock Assembly Only
4 160140 - ACE® Key Only

(key number XX4451)
5 180315 1 AD-26/AD-295 Lower Control Door Trim
6 150310 5 #8 x 1/2" Phillips Pan Head "A" Screw
7 150300 4 Hex Washer TEK Screw

6 American Dryer Corporation 450122-6

Dual T imer Contr ol Door Assembly

For Models Mfd. prior to March 21, 1997

Illus. No. Part No. Qty. Description

1 880773* 1 AD-26/AD-295 Coin Control Door with T rim Less Locks

(includes illus. nos. 1, 5, and 6)

850415* 1 AD-26/AD-295 Coin Control Door Only

2 112350 1 ADC Logo Only

870011 1 Logo Double Stick Tape Kit
3 160040 1 ACE® Lock Assembly Only
4 160140 - ACE® Key Only

(key number XX4451)
5 180315 1 AD-26/AD-295 Lower Control Door Trim
6 150310 5 #8 x 1/2" Phillips Pan Head "A" Screw

* Specify color when ordering.

450122-6 Telephone: [phone] / www.amdry.com 7

Single Coin Micr oprocessor Contr ol Panel Assembly

For Models Mfd. as of April 11, 1996

Illus. No. Part No. Qty. Description

1 112568 1 Single Coin Keyboard for Hanke Acceptor
2 881163 1 25¢ Hanke Coin Acceptor with Optic

881450 1 25¢ Canadian Coin Acceptor with Optic

881451 1 0.880 Token Hanke Coin Acceptor with Optic
3 150150 1 2.5 mm x 10 mm Stainless Steel Phillips Screw
4 881143 1 Hanke Optic Switch
5 150415 1 #10-16 x 1/2” Phillips Screw
6 883353 1 Control Panel Assembly Complete Less Acceptor

(includes illus. nos. 1 and 5 through 10)

883352 1 Control Panel Only
7 137216 1 Phase 5 Coin Board
8 152102 4 M-3 Metric Hex Nut
9 153010 2 #6 Star Washer
10 150005 2 #6-32 x 1/4” Phillips Round Head Machine Screw

8 American Dryer Corporation 450122-6

Single Coin Micr oprocessor Contr ol Panel Assembly

For Single Coin 25¢ Models Only

Illus. No. Part No. Qty. Description

1 112560 1 AD-26/AD-295 Single Coin Keypad Label Only
2 880887 1 AD-26/AD-295 Single Coin Panel Control less Acceptor - 24 VAC

(includes illus. nos. 1 through 5)

880888 1 AD-26/AD-295 Control Panel Only

3 137216 1 AD-26/AD-295 Phase 5 Microprocessor Controller Only

824998 1 Phase 5 Battery Clip Only
4 153010 2 #6 Star Washer
5 150005 2 #6-32 x 1/4" Phillips Round Head Machine Screw
6 -------- 1 25¢ Coin Acceptor Only

(refer to 25¢Coin Acceptor Component Listing on page 13)

7 137056 1 Optical Switch Only
8 150309 1 #10-16 x 1/2" HH TEK Crimptite Screw

NOTE: Contact factory for export models.

450122-6 Telephone: [phone] / www.amdry.com 9

Dual Coin Micr oprocessor Contr ol Panel Assembly

For Export Models Only

Illus. No. Part No. Qty. Description

1 112560 1 AD-26/AD-295 Dual Coin Keypad Label Only
2 880906 1 AD-26/AD-295 Dual Coin Panel Control less Acceptor - 24 VAC

(includes illus. nos. 1 through 5)

880904 1 AD-26/AD-295 Dual Coin Control Panel Only

3 137216 1 AD-26/AD-295 Phase 5 Control Microprocessor Only

824998 1 Phase 5 Battery Clip Only
4 153010 2 #6 Star Washer
5 150005 2 #6-32 x 1/4" Phillips Round Head Machine Screw
6 -------- 1 Dual Coin Acceptor Only

(refer to Dual Coin Acceptor Component Listing on
page 14and page 15)

7 137056 2 Optical Switch Only
8 150309 1 #10-16 x 1/2" HH TEK Crimptite Screw

NOTE: Contact factory for export models.

10 American Dryer Corporation 450122-6

Non-Coin Micropr ocessor Contr ol Panel Assembly

Illus. No. Part No. Qty. Description

1 112560 1 AD-26/AD-295 Dual Coin T win-Keypad Label Only
2 880905 1 AD-26/AD-295 Non-Coin Control Panel Assembly Complete - 24 VAC

(includes illus. nos. 1 through 5)

880916 1 AD-26 /AD-295 Non-Coin Control Panel Only

3 137216 1 Phase 5 Non-Coin Computer Board Only

824998 1 Phase 5 Battery Clip Only
4 153010 2 # 6 Star Washer
5 150005 2 #6-32 x 1/4" Phillips Round Head Machine Screw

450122-6 Telephone: [phone] / www.amdry.com 11

Micropr ocessor Control Box Assembly

Illus. No. Part No. Qty. Description

1 150103 2 #8-32 x 3/4" Phillips Round Head Machine Screw
2 141403 1 24 VAC Transformer Only
3 151001 2 #8-32 Pal Nut
4 151000 * #6-32 Pal Nut
5 136008 * 3-Position Fuse Block
6 150002 * #6-32 x 1" Phillips Round Head Machine Screw
7** 136057 * 1/2-Amp (Slo Blo) Fuse Only
8 150002 2 #6-32 x 1" Phillips Round Head Machine Screw
9 120715 1 30-Position Terminal Block
10 151000 2 #6-32 Pal Nut
1 1 122626 1 15-Pin Socket Connector Only
12 122705 11 Socket T erminal Only
13 122704 11 Pin T erminal Only
14 122625 1 15-Pin Socket Connector Only

137025 1 6/15 Position Starin Relief ... Not Illustrated
15 122631 1 6-Pin Socket Connector Only
16 122705 3 Socket Terminal Only
17 122704 3 Pin Terminal Only
18 122630 1 6-Pin Connector Only

137025 1 6/15 Position Starin Relief ... Not Illustrated
19 150309 1 #10-16 x 1/2" HH TEK Crimptite Screw
20 121010 1 L-70 Ground Lug
21 132475 1 2-Pole Contactor
22 824828 1 RC Network with Connectors
23 150103 4 #8-32 x 3/4" Phillips Round Head Machine Screw
24 151001 4 #8-32 Pal Nut

* For 115 VAC application quanityis 1 and for 208/230 VAC application quanity is 2.
** Check fuse rating for verification.

12 American Dryer Corporation 450122-6

25¢ Coin Acceptor Component Listing

Illus. No. Part No. Qty. Description

1 881930 1 AD-26/AD-295 25¢ Coin Acceptor Body Only
2 154320 1 #4-40 x 11/16" x 1" U-Bolt Only
3 880800 1 AD-26/AD-295 25¢ Coin Acceptor Lower Reject with Bracket Kit

(includes illus. nos. 3 and 15)

125720 1 AD-26/AD-295 25¢ Coin Acceptor Lower Reject with Bracket Only
4 152016 2 #4-40 Hex Nut
5 150020 1 #4-40 x 5/16" Slotted Pan Head Machine Screw
6 137056 1 Optical Switch Only
7 137049 1 Optical Switch Mounting Bracket Only
8 150020 1 #4-40 x 5/16" Slotted Pan Head Machine Screw
9 150020 1 #4-40 x 5/16" Slotted Pan Head Machine Screw
10 125715 1 AD-26/AD-295 25¢ Coin Acceptor Upper Assembly Complete

(includes illus. nos. 10 through 14)
11 125706 1 3/16" Coin Acceptor Retaining Ring Only
12 125704 1 Coin Acceptor Spring Only
13 125705 2 Coin Acceptor Spacer Only
14 125703 1 Coin Acceptor Rod Only
15 150110 1 #8-32 x 1/4" Binding Head Phillips Machine Screw

450122-6 Telephone: [phone] / www.amdry.com 13

Dual Coin Acceptor Component Listing

For Export Models Only

Illus. No. Part No. Qty. Description

1 125726 1 $1 Canadian Coin Acceptor Body Only

881931 1 1 English Pound (1£) Coin Acceptor Body Only
125738 1 10 Danish Krone (10KR) Coin Acceptor Body Only
881923 1 1 Dutch Guilder (1G) Coin Acceptor Body Only

2 882054 1 25¢ Canadian Coin Acceptor Body Only

125731 1 5 Belgian Franc (5BF) Coin Acceptor Body Only
125737 1 5 Danish Krone (5KR) Coin Acceptor Body Only

881926 2 25¢ Dutch Guilder Coin Acceptor Body Only
3 154320 2 #4-40 x 11/16" x 1" U-Bolt
4 880801 1 Large Lower Reject with Bracket Kit

(includes illus. nos. 4 and 18)

125721 1 $1 Canadian Coin Acceptor Lower Assembly Only

1 50 English Pence (50P) Coin Acceptor Lower Assembly Only
1 1 English Pound (1£) Coin Acceptor Lower Assembly Only
1 20 Belgian Franc (20BF) Coin Acceptor Lower Assembly Only
1 5 French Franc (5 FF) Coin Acceptor Lower Assembly Only
1 10 Danish Krone (10KR) Coin Acceptor Lower Assembly Only
1 1 Dutch Guilder (1G) Coin Acceptor Lower Assembly Only

14 American Dryer Corporation 450122-6

Dual Coin Acceptor Component Listing (continued)

For Export Models Only

Illus. No. Part No. Qty. Description

5 880800 1 Small Lower Reject with Bracket Kit

(includes illus. nos. 5 and 18)

125720 1 25¢ Canadian Coin Acceptor Lower Assembly Only

1 20 English Pence (20P) Coin Acceptor Lower Assembly Only
1 5 Belgian Franc (5BF) Coin Acceptor Lower Assembly Only
1 25¢ Dutch Guilder Coin Acceptor Lower Assembly Only

880801 1 Large Lower Reject with Bracket Kit

(includes illus. nos. 5 and 18)
6 152016 4 #4-40 Hex Nut
7 150020 2 #4-40 x 5/16" Slotted Pan Head Machine Screw
8 137056 2 Optical Switch Only
9 137049 2 Optical Switch Mounting Bracket
10 150020 2 #4-40 x 5/16" Slotted Pan Head Machine Screw
11 150020 2 #4-40 x 5/16" Slotted Pan Head Machine Screw
12 125716 1 $1 Canadian Coin Acceptor Upper Assembly Complete

(includes illus. nos. 12 and 14 through 17)

1 50 English Pence (50P) Coin Acceptor Upper Assembly Complete

(includes illus. nos. 12 and 14 through 17)

1 1 English Pound (1£) Coin Acceptor Upper Assembly Complete

(includes illus. nos. 12 and 14 through 17)

1 20 Belgian Franc (20BF) Coin Acceptor Upper Assembly Complete

(includes illus. nos. 12 and 14 through 17)

1 5 French Franc (5FF) Coin Acceptor Upper Assembly Complete

(includes illus. nos. 12 and 14 through 17)

1 10 Danish Krone (10KR) Coin Acceptor Upper Assembly Complete

(includes illus. nos. 12 and 14 through 17)

1 1 Dutch Guilder (1G) Coin Acceptor Upper Assembly Complete

(includes illus. nos. 12 and 14 through 17)
13 125715 1 25¢ Canadian Coin Acceptor Upper Assembly Complete

(includes illus. nos. 13 through 17)

1 20 English Pence (20P) Coin Acceptor Upper Assembly Complete

(includes illus. nos. 13 through 17)

1 5 Belgian Franc (5BF) Coin Acceptor Upper Assembly Complete

(includes illus. nos. 13 through 17)

1 25¢ Dutch Guilder Coin Acceptor Upper Assembly Complete

(includes illus. nos. 13 through 17)

125716 1 2 French Franc (2FF) Coin Acceptor Upper Assembly Complete

(includes illus. nos. 13 through 17)

1 5 Danish Krone (5KR) Coin Acceptor Upper Assembly Complete

(includes illus. nos. 13 through 17)
14 125706 2 3/16" Coin Acceptor Retainer Ring Only
15 125704 2 Coin Acceptor Spring Only
16 125705 4 Coin Acceptor Spacer Only
17 125703 2 Coin Acceptor Rod Only
18 150110 2 #8-32 x 1/4" Binding Head Phillips Machine Screw

450122-6 Telephone: [phone] / www.amdry.com 15

Dual T imer Contr ol Panel Assembly

Illus. No. Part No. Qty. Description

1 123005 1 Red Indicator Light - 24 VAC
2 122400 1 Rocker Heat Selector Switch - 24 VAC
3 880774 1 Dual Timer Control Panel Assembly Complete - 24 VAC

(includes illus. nos. 1 through 21)

880920 1 AD-26/AD-295 Dual Timer Control Panel Only
4 131917 1 Push-to-Start Relay - 24 VAC
5 150207 2 #10-24 x 1/2" Round Head Machine Screw
6 154001 2 #10-24 Speed Nut
7 152000 2 #6-32 Hex Nut
8 153010 2 # 6 Star Washer
9 120730 1 30-Position Terminal Block (for models mfd. as of May 2, 1993)

120713 1 18-Position Terminal Block (for models mfd. prior to May 2, 1993)
10 150002 2 #6-32 x 1" Round Head Machine Screw
1 1 150110 4 #8-32 x 1/4" Phillips Head Machine Screw
12 150001 2 #6-32 x 1/2" Round Head Machine Screw
13 131931 1 Dual Timer Relay - 24 VAC
14 151000 2 #6-32 Pal Nut
15 112050 1 Dual Timer Label Only
16 150309 1 #10-16 x 1/2" HH TEK Crimptite Screw
17 124103 2 Arrow Timer Knob
18 124027 1 60-Minute Timer - 24 VAC
19 124028 1 15-Minute Timer - 24 VAC
20 122602 1 9-Pin Connector Only
21 122700 8 Pin Terminal Only

--- 122801 1 Pin/Socket Extraction T ool

16 American Dryer Corporation 450122-6

Non-Micropr ocessor Coin Contr ol Panel Assembly

Illus. No. Part No. Qty. Description

1 123005 1 Red Indicator Light - 24 VAC
2 122400 1 Rocket Heat Selector Switch - 24 VAC
3 880900 1 Coin Meter Control Panel Assembly Complete Less Meter - 24 VAC

(includes illus. nos. 1 through 6 and 8 through 12)

880899 1 Coin Meter Control Panel Only
4 131917 1 Push-To-Start Relay - 24 VAC
5 150207 2 #10-24 x 1/2" Phillips Round Head Machine Screw
6 154001 2 #10-24 Speed Nut
7* 125601 1 25¢ Coin Meter (Specify Timing) - 24 VAC
8 150303 2 # 4 x 3/4" Pan Head "A" Screw
9 120712 1 12-Position Terminal Block
10 150415 1 # 10-16 x 1/2" Phillips Round Head Crimptite Screw
11 122602 1 9-Pin Male Connector Only
12 122700 6 Pin Terminal Only
— 122801 1 Pin/Extraction Tool

* Consult factory for coin meters not listed.

450122-6 Telephone: [phone] / www.amdry.com 17

Non-Micropr ocessor Control Box Assembly

Illus. No. Part No. Qty. Description

1 122603 1 9-Pin Socket Female Connnector
2 122701 6 Socket Terminal Only

122801 1 Pin/Socket Extraction Tool
3 315010 1 9-Pin Connector Bracket
4 150300 2 #10 x 1/2" Hex Washer TEK Screw
5 150300 2 #10 x 1/2" Hex Washer TEK Screw
6 141403 1 2 4Vac Transformer
7 136008 * Fuse Block/Strip Only
8** 136057 * 1/2 Amp (Slo Blo) Fuse
9 150301 * #8-18 x 7/16" Phillips Pan Head TEK Screw
10 150002 2 #6-32 x 1" Slotted Round Head Machine Screw
1 1 120715 1 30-Position T erminal Block
12 151000 2 #6-32 Pal Nut
13 132475 1 Motor Contactor
14 150103 4 #8-32 x 3/4" Phillips Round Head Machine Screw
15 151001 4 #8-32 Pal Nut
16 824828 1 Filter Capacitor

* For 115 VAC application quanity is 1 and for 208/230 VAC application quanity is 2.
** Check fuse rating for verification.

18 American Dryer Corporation 450122-6

Main Door Assembly

Illus. No. Part No. Qty. Description

1 882991 1 Black Main Door Assembly Complete

(includes illus. nos. 1 and 5 through 7)
2 800448 1 12-1/2" Stainless Steel Main Door Hinge
3 150410 4 #10-24 x 3/8" Phillips Pan Head Taptite Screw
4 152014 4 1/4-20 Free Spin Wash Nut
5 102349 1 Plastic Main Door Gasket Only

102354 1 Stainless Steel Main Door Gasket Only

6 102210 1 20-7/16" Door Glass Only

170730 1 Adhesive for Door Glass and Gasket

(10.3 oz Cartridge)
7 150431 1 Main Door Latch Screw

(#10 x 7/16" Dome Head Screw)

450122-6 Telephone: [phone] / www.amdry.com 19

Main Door Switch Assembly

Illus. No. Part No. Qty. Description

1 152013 2 #6-32 Hex Nut
2 153008 2 #6 Lock Washer
3 137005 1 Single Pole Door Switch
4 121028 2 Insulated Female Terminal
5 154281 2 3/8" Standard Nylon Spacer
6 800448 1 12-1/2" Stainless Steel Main Door Hinge

inlcudes illus. nos. 6 and 7)
7 153565 2 #6 Clinch Stud
8 313218 1 Main Door Switch Housing Only
9 150201 2 #10-32 x 1/4" Phillips Pan Head TEK Screw
10 121405 1 Rubber Grommet

20 American Dryer Corporation 450122-6

Coin Vault Assembly

Illus. No. Part No. Qty. Description

1* 880118 1 AD-26/AD-295 Coin Box Assembly Only Less Lock

880901 1 AD-26/AD295 Coin Box Faceplate Only

®

2 160036** 1 ACE

Lock Assembly with Key
3 160136** 1 ACE® Key Only
4* 880117 1 AD-26/AD-295 Coin Vault Assembly Only Less Lock

(includes illus. nos. 1, 4, and 6)

5* -------- 1 AD-26/AD-295 Front Panel Assembly

(refer to Coin Front Panel Assembly on page 22)

6 152014 4 #1/4-20 Free Spin Wash Nut

* Specify color when ordering.
** Specify key number when ordering.

450122-6 Telephone: [phone] / www.amdry.com 21

Coin Front Panel Assembly

Illus. No. Part No. Qty. Description

1* 880908 1 AD-26/AD-295 Front Panel Assembly Complete

(includes illus. nos. 1, 2, 3, and 5)
2 154215 2 5/32 x 1/4" Pop Rivet
3 170330 1 Friction Door Latch
4 150309 1 #10-16 x 1/2" HH TEK Crimptite Screw
5 121405 1 Rubber Grommet

* Specify color when ordering.

22 American Dryer Corporation 450122-6

Non-Coin Front Panel Assembly

Illus. No. Part No. Qty. Description

1* 880919 1 AD-26/AD-295 Non-Coin Front Panel Assembly Complete

(includes illus. nos. 1, 2, 3, and 5)
2 154215 2 1/8" Pop Rivet
3 170330 1 Friction Door Latch
4 150309 1 #10-16 x 1/2" HH TEK Crimptite Screw
5 121405 1 Rubber Grommet

* Specify color when ordering.

450122-6 Telephone: [phone] / www.amdry.com 23

Lint Door Assembly

Illus. No. Part No. Qty. Description

1 880248* 1 AD-26/AD-295 Lint Door with Trim Less Locks

(includes illus. nos. 1, and 4 through 8)

880889* 1 AD-26/AD-295 Lint Door Only

2 160015 1 MK-100 Lock Assembly Only

160104 1 MK-100 Key Only
3 160016 1 Lock Cam Only
4 180316 1 AD-26/AD-295 Upper Door Trim
5 150201 5 #10-32 x 1/4" Phillips Pan Head TEK Screw
6 180315 1 AD-26/AD-295 Lower Door Trim
7 150201 5 #10-32 x 1/4" Phillips Pan Head TEK Screw
8 117604 7 1/8” x 3/8” Neo.Sponge Tape (sold in feet)

* Specify color when ordering.

24 American Dryer Corporation 450122-6

Lint Basket /Lint Switch Assemblies

Illus. No. Part No. Qty. Description

1* 880909 1 AD-26 Lint Basket Assembly

(includes illus. nos. 1 and 2)

850827 1 AD-295 Lint Basket Assembly

(includes illus. nos. 1 and 2)
2 117604 4 Noise Suppressor Tape (sold by the foot)
3 122116 1 Lint Door Switch - 24 VAC
4 122605 1 4-Pin Socket Connector
5 122701 4 Socket Terminal Only
6 880921 1 AD-26/AD-295 Lint Basket Switch Box Assembly

(includes illus. nos. 3 through 6)
7 150301 4 #8-18 x 7/16" Phillips Pan Head TEK Screw
8 122700 8 Pin Terminal Only
9 122604 2 4-Pin Connector Only

* Specify color when ordering.

450122-6 Telephone: [phone] / www.amdry.com 25

AD-26 T umbler/Support Assemblies

For Models Mfd. as of August 17, 1998

Illus. No. Part No. Qty. Description

1 800835 1 AD-26 Tumbler and Support Assembly Complete with Felt Collars

(includes illus. nos. 1 through 11 and 13)

800718* 1 AD-26 T umbler Only without Felt Collars

(includes illus. nos. 1, 2, and 3)
2 150415 30 #10-16 x 1/2" Phillips Round Head Crimptite Screw
3 301318 2 AD-26 Short Tumbler Rib Only

301317 1 AD-26 Tall T umbler Rib Only
4 150518 1 #5/16-18 x 3/8" Socket Button Head Screw
5 100916 3 3/8”-16 x 25" Tie Rod Only
6 153003 3 3/8" x 1-1/2" Fender Washer
7 850066 1 Tumbler Support Only
8 152004 3 #5/16-18 Hex Nut
9 153002 3 5/16" Lock Washer
10 153001 3 5/16" Flat Washer
1 1 115999 1 Felt Collar Only

401010 1 #847 Adhesive for Felt Collar (5 ounce tube)
12 100139 1 12-Rib 120" Poly "J" Belt

(refer to 12-Rib 120" (J) Poly Belt Arrangement on

13 115992 1 Inner Ring Felt Collar Only
14 100802 1 1-3/8" Retaining Ring

page 41)

* Felt collars arenot included and must be ordered separately.

26 American Dryer Corporation 450122-6

AD-26 T umbler/Support Assemblies

For Models Mfd. prior to August 17, 1998

Illus. No. Part No. Qty. Description

1 800835 1 AD-26 Tumbler and Support Assembly Complete with Felt Collars

(includes illus. nos. 1 through 11 and 13)

800718* 1 AD-26 T umbler Only without Felt Collars

(includes illus. nos. 1, 2, and 3)
2 150415 30 #10-16 x 1/2" Phillips Round Head Crimptite Screw
3 301318 2 AD-26 Short Tumbler Rib Only

301317 1 AD-26 Tall T umbler Rib Only
4 150518 1 #5/16-18 x 3/8" Socket Button Head Screw
5 882051 3 #5/16-18 x 25" Tie Rod Only
6 153003 3 3/8" x 1-1/2" Fender Washer
7 850061 1 Tumbler Support Only
8 152004 3 #5/16-18 Hex Nut
9 153002 3 5/16" Lock Washer
10 153001 3 5/16" Flat Washer
1 1 115999 1 Felt Collar Only

401010 1 #847 Adhesive for Felt Collar (5 ounce tube)
12 100139 1 12-Rib 120" Poly "J" Belt

(refer to 12-Rib 120" (J) Poly Belt Arrangement on

13 115992 1 Inner Ring Felt Collar Only
14 100802 1 1-3/8" Retaining Ring

page 41)

* Felt collars arenot included and must be ordered separately.

450122-6 Telephone: [phone] / www.amdry.com 27

AD-295 T umbler/Support Assemblies

For Models Mfd. as of November 2, 1998

Illus. No. Part No. Qty. Description

1 800832 1 AD-295 Tumbler and Support Assembly Complete with Felt Collars

(includes illus. nos. 1 through 11 and 13)

800892 AD-295 Stainless Steel T umbler and Support Assembly Complete

with Felt Collars
(includes illus. nos. 1 through 11 and 13)

800722* 1 AD-295 Tumbler Only without Felt Collars

(includes illus. nos. 1, 2, and 3)

800842* 1 AD-295 Stainless Steel T umbler Only without Felt Collars

(includes illus. nos. 1, 2, and 3)
2 150415 30 #10-16 x 1/2" Phillips Round Head Crimptite Screw
3 301315 2 AD-295 Short Tumbler Rib Only

301316 1 AD-295 Tall Basket Rib (T umbler) Only
301414 2 AD-295Stainless Steel Short Tumbler Rib Only

301415 1 AD-295 Stainless Steel Tall Basket Rib (Tumbler) Only
4 150518 1 #5/16-18 x 3/8" Socket Button Head Screw
5 882050 3 #5/16-18 x 31" Tie Rod Only
6 153001 3 5/16" Flat Washer
7 850066 1 Tumbler Support Only
8 152004 3 #5/16-18 Hex Nut
9 153002 3 5/16" Lock Washer
10 153001 3 5/16" Flat Washer
1 1 116003 1 Felt Collar Only

401010 1 #847 Adhesive for Felt Collar (5 ounce tube)
12 100139 1 12-Rib 120" Poly "J" Belt

(refer to 12-Rib 120" (J) Poly Belt Arrangement on

13 115992 1 Inner Ring Felt Collar Only
14 100802 1 1-3/8" Retaining Ring

page 41)

* Felt collars arenot included and must be ordered separately.

28 American Dryer Corporation 450122-6

AD-295 T umbler/Support Assemblies

For Models Mfd. prior to November 2, 1998

Illus. No. Part No. Qty. Description

1 800832 1 AD-295 Tumbler and Support Assembly Complete with Felt Collars

(includes illus. nos. 1 through 11 and 13)

800892 AD-295 Stainless Steel T umbler and Support Assembly Complete

with Felt Collars
(includes illus. nos. 1 through 11 and 13)

800722* 1 AD-295 Tumbler Only without Felt Collars

(includes illus. nos. 1, 2, and 3)

800842* 1 AD-295 Stainless Steel T umbler Only without Felt Collars

(includes illus. nos. 1, 2, and 3)
2 150415 30 #10-16 x 1/2" Phillips Round Head Crimptite Screw
3 301315 2 AD-295 Short Tumbler Rib Only

301316 1 AD-295 Tall Basket Rib (T umbler) Only
301414 2 AD-295Stainless Steel Short Tumbler Rib Only

301415 1 AD-295 Stainless Steel Tall Basket Rib (Tumbler) Only
4 150518 1 #5/16-18 x 3/8" Socket Button Head Screw
5 882050 3 #5/16-18 x 31" Tie Rod Only
6 153001 3 5/16" Flat Washer
7 850061 1 Tumbler Support Only
8 152004 3 #5/16-18 Hex Nut
9 153002 3 5/16" Lock Washer
10 153001 3 5/16" Flat Washer
1 1 116003 1 Felt Collar Only

401010 1 #847 Adhesive for Felt Collar (5 ounce tube)
12 100139 1 12-Rib 120" Poly "J" Belt

(refer to AD-26/AD-295 12-Rib 120" (J) Poly Belt Arrangement on
page 41)

13 115992 1 Inner Ring Felt Collar Only
14 100802 1 1-3/8" Retaining Ring

* Felt collars arenot included and must be ordered separately.

450122-6 Telephone: [phone] / www.amdry.com 29

T umbler Brush Assembly

Illus. No. Part No. Qty. Description

1 170196 2 AD-26/AD-295 Drive Belt Sealing Brush
2 317652 2 AD-26/AD-295 Sealing Brush Clip End
3 154210 6 5/16" x 3/16" Pop Rivet
4 120117 2 3/8" EMT Hanger
5 317650 1 AD-26/AD-295 Wrapper Gasket Strip
6 102325 1 8-1/2" x 1-1/2" x 1/8" Wrapper Channel Gasket
7 154210 2 5/32" x 3/16" Pop Rivet
8 100139 1 12-Rib 120" Poly "J" Belt

(refer to 12-Rib 120" (J) Poly Belt Arrangement on

30 American Dryer Corporation 450122-6

page 41)

Micropr ocessor T emperatur e Sensor Bracket Assembly

Illus. No. Part No. Qty. Description

1 880925 1 AD-26/AD-295 Microprocessor Temperature Sensor Bracket Assembly

Complete
(includes illus. nos. 1 through 9, 12, and 13)

305016 1 AD-26/AD-295 Temperature Sensor Bracket Top Only
2 150000 2 #6-32 x 1/4" Round Head Machine Screw
3 153010 2 # 6 Star Washer
4 130102 1 190º Large Thermostat Only
5 152013 2 #6-32 Hex Nut
6 154007 2 1/4" Tinnerman Push-On Fastener
7 880251 1 1/4" Temperature Sensor Probe Assembly

(includes illus. nos. 6 through 9)
8 122701 4 Socket Terminal Only
9 122605 1 4-Pin Socket Connector Only
10 122700 4 Pin T erminal Only
11 122604 1 4-Pin Connector Only

122801 1 Pin/Socket Extraction Tool
12 121405 1 Rubber Grommet
13 881537 2 Tinnerman "S" Clip

450122-6 Telephone: [phone] / www.amdry.com 31

Non-Micropr ocessor T emperatur e Sensor Backet Assembly

Illus. No. Part No. Qty. Description

1 880907 1 AD-26/AD-295 Non-Microprocessor Sensor Bracket Assembly Complete

(includes illus. nos. 1 through 12)
2 153010 5 # 6 Star Washers
3 150005 5 #6-32 x 1/4 Round Head Machine Screw
4 130106 1 Large 170º Thermostat Only
5 152000 5 #6-32 Hex Nut
6 840065 1 Sensor Jumper
7 840062 1 Sensor Bracket Harness
8 130100 1 Large 150º Thermostat Only
9 130111 1 Large 130º Thermostat Only
10 130105 1 Large 100º Thermostat Only
1 1 122701 4 Socket T erminal Only
12 122605 1 4 -Pin Socket Connector
13 122604 1 4-Pin Conector
14 122700 4 Pin Terminal Only

32 American Dryer Corporation 450122-6

Sail Switch Assembly

Illus. No. Part No. Qty. Description

1 150301 2 #8-18 x 7/16" Phillips Pan Head TEK Screw
2 802800 1 Sail Switch Box with Cover and Bracket Only

(includes illus. nos. 2, 4, and 5)

802801 1 Sail Switch Box Assembly Complete

(includes illus. nos. 2 through 10)
3 154004 1 Twin Speed Nut
4 150415 2 #10-16 x 1/2" Phillips Round Head Crimptite Screw
5 802799 1 Sail Switch Box Cover and Bracket Only
6 122200 1 Sail Switch Only
7 150303 2 # 4 x 3/4" Pan Head "A" Machine Screw
8 105500 1 Sail Switch Actuator Rod
9 319206 1 Sail Switch Damper (embossed)
10 154002 1 1/8" Push-on Fastener

450122-6 Telephone: [phone] / www.amdry.com 33

T umbler Bearing Assembly

34 American Dryer Corporation 450122-6

T umbler Bearing Assembly

Illus. No. Part No. Qty. Description

1 880203 1 1-3/8" Flange Bearing Only
2 153005 4 3/8" Lock Washer
3 152005 4 #3/8-16 Hex Nut
4 150508 2 #3/8-16 x 3/4" Hex Head Machine Bolt
5 153005 2 3/8" Lock Washer
6 152005 2 #3/8-16 Hex Nut
7 150600 2 #3/8-16 x 1-1/2" Hex Head Machine Bolt
8 153004 2* 3/8" Flat Washer
9 153005 2 3/8" Lock Washer
10 152005 2 #3/8-16 Hex Nut
11 150501 4 #5/16-18 x 3/4" Hex Head Machine Bolt
12 153002 4 5/16" Lock Washer
13 153001 4 5/16" Flat Washer
14 150621 2 #5/16-18 x 1-1/2" Hex Head Machine Bolt
15 152004 2 #5/16-18 Hex Nut
16 801101 1 1-3/8" Bearing Box Assembly Complete

(includes illus. nos. 4 through 20)

For models mfd. without Rotational Sensor

80 1 1 0 3 1 1-3/8" Bearing Box and Support Assembly Only

(includes illus. nos. 4, 5, 6, 16, and 17)

80 1 10 5 1 1-3/8" Bearing Box Only
17 801 1 04 1 1-3/8" Pillow Block Bearing Support Only
18 880202 1 1-3/8" Pillow Block Bearing Only

880779 1 1-3/8" Pillow Block Bearing Assembly with Magnet

(for models mfd. with Rotational Sensor)

19 152004 2 #5/16-18 Hex Nut
20 150610 2 #5/16-18 x 1-1/2" Allen Set Screw
21 824807 1 Rotational Sensor Assembly

* Some models require a quanity of 4.

450122-6 Telephone: [phone] / www.amdry.com 35

Totally Enclosed, Non-Vent Motor/Idler Assemblies

Illus. No. Part No. Qty. Description

1 152006 2 1/2-20 Left Hand Jam Nut
2 153050 1 1/2" S.A.E. Flat Washer
3 100702 1 1/8" x 1/8" x 1-1/2" Key
4 100604 1 Impellor (Fan/Blower) Only
5 117684 4 Noise Suppressor Tape (sold in feet)
6 880890 1 AD-26/AD-295 Motor Mount Only

880893 1 AD-26/AD-295 Motor Mount Assembly Complete - 60 Hz Models Only

(includes illus. nos. 1 through 10 and 14 through 18)

880894 1 AD-26/AD-295 Motor Mount Assembly Complete - 50 Hz Models Only

(includes illus. nos. 1 through 10 and 14 through 18)

7 100099 1 1/2 HP 115/208-230/60 Hz/1ø T.E.N.V. Motor with Plug

100054 1 1/2 HP 115/208-230/50 Hz/1ø T.E.N.V. Motor with Plug
8 153001 4 5/16" Flat Washer
9 153002 4 5/16" Lock Washer

36 American Dryer Corporation 450122-6

Totally Enclosed, Non-Vent Motor/Idler Assemblies (continued)

Illus. No. Part No. Qty. Description

10 154279 4 #5/16-18 x 3/4" Carriage Bolt
11 122701 * Socket T ermianl Only

122801 1 Pin/Socket Extraction Tool
12 137030 1 8-Pin Housing
13 100173 1 12-Rib 120" Poly "J" Belt
14 101097 1 Rear Motor Shaft Bushing (for 60 Hz Models Only)

101099 1 Rear Motor Shaft Bushing (for 50 Hz Models Only)
15 154327 1 Rear Bushing Set Screw
16 101096 1 Front Motor Shaft Bushing Only
17 153024 1 #10 Lock Washer
18 150217 1 #10-32 x 3/4" Phillips Round Head Machine Screw
19 880922 1 Idler Assembly Complete

(includes illus. nos. 19 through 38)

880895 1 Idler Plate Angle Assembly Only
20 153005 1 #3/8-16 x 3-3/8" Spade Bolt
21 153004 1 3/8" Flat Washer
22 153005 1 3/8" Lock Washer
23 152005 2 #3/8"-16 Hex Nut
24 802203 1 Idler Plate
25 153007 1 1/4" Lock Washer
26 150112 1 #1/4-20 x 1 1/4" Hex Head Bolt
27 152002 1 #1/4-20 Hex Nut
28 153018 1 1/4" Flat Washer
29 153007 1 1/4" Lock Washer
30 157010 1 1-7/8" Extension Spring
31 154278 1 #5/16-18 x 5/8" Shoulder Screw
32 150600 1 #3/8-16 x 1/2" Hex Head Bolt
33 100251 1 Idler Pulley Only
34 100429 1 Idler Pivot Sleeve
35 170359 1 Nylon Spacer
36 152000 2 #6-32 Hex Nut
37 153008 2 #6 Lock Washer
38 150001 2 #6-32 x 1/2 Round Head Machine Screw

* As required.

450122-6 Telephone: [phone] / www.amdry.com 37

Upshot Burner Assembly

38 American Dryer Corporation 450122-6

Upshot Burner Assembly

Illus. No. Part No. Qty. Description

1 881372 1 Straight Shut-Off
2 141303 1 1/2" Union T ail Piece
3 143001 1 1/2" Coupling
4 142700 1 Close Nipple
5 142500 1 1/2" x 90º Elbow
6 142812 1 1/2" x 3" Nipple
7 128927 1 1/2" 24 VAC DSI Redundant Valve (natural gas)

140411 1 1/2" V alve Conversion Kit (liquid propane)
8 318700 1 Pipe Bracket
9 150300 2 #10 x 1/2" Hex Washer TEK Screw

10 141238 1 1/2" Manifold
11 -------- 1 Burner Orifice

(refer to Upshot Burner Orifice Listing on

12 880891 1 AD-26/AD-295 Burner Front and Back Bracket
13 880892 1 ADG-26/ADG-295 Upshot Burner Tube Assembly

(includes illus. nos. 13 and 30 through 33)
141 1 30 1 Tube Only
141131 1 Tube and Spreader

(includes item no. 29)

14 152001 2 #8-32 Hex Nut
15 150300 2 #10 x 1/2" Hex Washer TEK Screw
16 820100 1 DSI Mounting Bracket
17 882627 1 ADC DSI Module Only (50/60 Hz)
18 152000 4 6-32 Hex Nut
19 153010 4 #6 Star Washer
20 150301 2 #8-18 x 7/16" Phillips Pan Head TEK Screw
21 318083 1 Outer Burner Baffle
22 150300 4 #10-32 x 1/2" Hex Washer Tek Screw
23 880923 1 ADG-26 Burner Box Assembly

(includes illus. nos. 23 through 26)
880924 1 ADG-295 Burner Box Assembly

(includes illus. nos. 23 through 26)

24 318076 1 Burner Box Cover
25 150300 4 #10 x 1/2" Hex Washer TEK Screw
26 319706 1 Hi-Limit Bracket
27 130401 1 330º Hi-Limit Only
28 150301 1 #8-18 x 7/16" Phillips Pan Head TEK Screw
29 141109 1 Flame Spreader
30 128918 1 Flame Sensor
31 128917 1 Spark Electrode with High Voltage (HV) Wire
32 150315 2 #6 x 3/8" Phillips Pan Head "B" Screw
33 318009 1 PSE Burner Tube Bracket

--- -------- 1 Conversion Kit

(refer to L.P. Conversion Kit Listing on

page 42)

page 42)

450122-6 Telephone: [phone] / www.amdry.com 39

Back Guard Assembly

Illus. No. Part No. Qty. Description

1 150301 6 #8-18 x 7/16" Philips Pan Head TEK Screw
2 314408 1 AD-26/295 Back Guard
3 150300 8 #10 x 1/2" Hex Washer TEK Screw
4 318065 2 AD-26/295 Clean Out Plate
5 312530* 1 AD-26 Outer Top

312537* 1 A D - 2 9 5 O u t er Top

6 150301* 1 1 #8-18 x 7/16” Phillips Pan Head TEK Screw

* Items not shown in drawing.

40 American Dryer Corporation 450122-6

12-Rib 120" (J) Poly Belt Arrangement

450122-6 Telephone: [phone] / www.amdry.com 41

Upshot Burner Assembly Specifications

*gnitsiLecifirOrenruBtohspU

ledoM

rebmuN

zH06@D62-GDA
zH05@D62-GDA

zH06@D592-GDA
zH05@D592-GDA

.ytQ

.S.M.D.oNtraP.S.M.D.oNtraP

1
1
1
1

62#
92#
32#
82#

.teef000,2revosnoitavelerofyrotcaftlusnoC*

saGlarutaNsaG.P.L

328041
028041
658041

128041

34#
64#
24#
44#

908041
608041
018041
808041

*gnitsiLtiKnoisrevnoC.P.L

rebmuNledoM

zH06@D62-GDA
zH05@D62-GDA

zH06@D592-GDA
zH05@D592-GDA

.teef000,2revosnoitavelerofyrotcaftlusnoC*

42 American Dryer Corporation 450122-6

160478
239088
287088
339088

rebmuNtraPtiK

Additional Parts Available

Part No. Description

114006 “W arning - Fire Hazards” Label
114533 “120v Electric Service” Label
112280 “Super 30 Lint Screen” Label
114001 “Lint Screen” Label
112534 “Phase 5 Non-Coin Program Location Summary” Label
120802 Red Butt Connector
120902 #74B Wire Nut
120903 Crimp-on Wire Nut
121014 1/4" Insulated (female) T erminal
121499 4" Harness Tie
121500 7" Harness Tie
122804 Hydroguage, 15"
404500 Almond Brush-In-Cap Bottle Touch-Up Paint
404502 White Brush-In-Cap Bottle Touch-Up Paint
404506 Almond "B" Brush-In-Cap Bottle T ouch-Up Paint
404507 Cornflower Blue Brush-In-Cap Bottle Touch-Up Paint
410001 1/2" Allen Wrench

450122-6 Telephone: [phone] / www.amdry.com 43

ADC 450122 6 - 04/19/05-0