Page 1
AD-236 Parts Manual
Phase 7
American Dryer Corporation
88 Currant Road
Fall River, MA 02720-4781
Telephone: (508) 678-9000 / Fax: (508) 678-9447
E-mail: techsupport@amdry.com
www.amdry.com
120103MGOLDSTEIN/gbennett ADC Part No. 450255
Page 2
Retain This Manual In A Safe Place For Future Reference
American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is
properly maintained, it will provide many years of safe, efficient, and trouble free operation.
ONLY qualified technicians should service this equipment.
OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with
the dryer.
The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.
FOR YOUR SAFETY
Do not store or use gasoline or
other flammable vapors and
liquids in the vicinity of this or
any other appliance.
We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make
changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or
discontinue models.
POUR VOTRE SÉCURITÉ
Ne pas entreposer ni utiliser d’essence
ni d’autres vapeurs ou liquides
inflammables à proximité de cet
appareil ou de tout autre appareil.
Important
For your convenience, log the following information:
DATE OF PURCHASE ____________________________ MODEL NO. __________________________________________
RESELLER’S NAME _______________________________________________________________________________________
Serial Number(s) ________________________________________________________________________________________
________________________________________________________________________________________
AD-236 Phase 7
________________________________________________________________________________________
Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory,
you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department at (508)
678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that
your order is processed accurately and promptly.
The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the
various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.
“IMPORTANT NOTE TO PURCHASER”
Information must be obtained from your local gas supplier on the instructions
to be followed if the user smells gas. These instructions must be posted in a
prominent location near the dryer.
Page 3
Table of Contents
Non-Coin Control Door ....................................................................................................................................... 2
Locking Coin Control Door Assembly................................................................................................................. 3
Non-Coin Microprocessor Control Panel ............................................................................................................ 4
Coin Microprocessor Control Panel/Box Assemblies ......................................................................................... 5
Upper Front Panel Assembly (For Cold Rolled Steel [CRS] Door) ...................................................................6
Lower Front Panel Assembly (For Cold Rolled Steel [CRS] Door) ...................................................................7
Main Door “Steel” Assembly .............................................................................................................................. 8
Main Door Switch Assembly (For Cold Rolled Steel [CRS] Type Door)........................................................... 9
Basket (Tumbler)/Support Assembly ................................................................................................................. 10
Lint Drawer Assembly ...................................................................................................................................... 11
Lint Drawer Switch Assembly .......................................................................................................................... 12
Upper Pocket Sensor Bracket Assembly.......................................................................................................... 13
Lower Pocket Sensor Bracket Assembly ......................................................................................................... 14
Idler Bearing Assembly ..................................................................................................................................... 15
Basket (Tumbler) Bearing Assembly .......................................................................................................... 16, 17
Motor Mount Assembly ............................................................................................................................... 18, 19
Direct Spark Ignition (DSI) Gas Valve/Burner Assembly........................................................................... 20, 21
Gas Piping Assembly ........................................................................................................................................ 22
Gas Burner Assembly........................................................................................................................................ 23
Sail Switch Assembly ........................................................................................................................................ 24
Single-Phase (1ø) Motor, Electrical Relay Panel Assembly ............................................................................. 25
3-Phase (3ø) Motor, Electrical Relay Panel Assembly ..................................................................................... 26
3-Phase (3ø) Motor, Electrical Relay Panel Assembly ..................................................................................... 27
Back Guard Assembly....................................................................................................................................... 28
Exhaust Ducting Assembly................................................................................................................................ 29
Additional Parts Available.................................................................................................................................. 30
Page 4
2
Non-Coin Control Door
Illus. No. Part No. Qty. Description
1 884135* 1 Non-Coin Control Door Assembly
(includes illus. nos. 1 and 2)
884208 1 Stainless Steel Non-Coin Control Door Assembly
(includes illus. nos. 1 and 2)
2 117604 3 1/8” x 3/8” Sponge Tape (sold by the foot)
3 154011 4 #10-32 Multi-Thread U-Nut
4 150314 4 #10-32 x 1/2” TORX BTN Head Machine Screw
* Specify color when ordering.
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Page 5
Locking Coin Control Door Assembly
3
Illus. No. Part No. Qty. Description
1 884136* 1 Coin Control Door Assembly
(includes illus. nos. 1 and 6)
884207 1 Stainless Steel Coin Control Assembly
(includes illus. nos. 1 and 6)
2 160140 1 ACE® Key XX4451
3 154011 4 #10-32 Multi-Thread U-Nut
4 150314 4 #10-32 x 1/2” TORX BTN Head Machine Screw
5 160040 1 Control Door Lock
6 117604 3 1/8” x 3/8” Sponge Tape (sold by the foot)
* Specify color when ordering.
Telephone: (508) 678-9000 Fax: (508) 678-9447
Page 6
4
Non-Coin Microprocessor Control Panel
Illus. No. Part No. Qty. Description
1 112575 2 Phase 7 Keyboard
2 137270 2 16” x 1” Large Character Display
3 137250 2 Phase 7 Non-Coin Ribbon Cable
4 153010 8 Star Washer
5 150005 8 #6-32 x 1/4” Phillips Round Head Machine Screw
6 887011 2 Phase 7 Non-Coin Computer Board
(for models mfd. as of January 26, 2004)
887007 2 Phase 7 Non-Coin Computer Board
(for models mfd. prior to January 26, 2004)
7 152014 4 1/4-20 Hex Flange Nut
8 855270 1 Phase 7 Non-Coin Computer Panel
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Page 7
Coin Microprocessor Control Panel/Box Assemblies
5
Illus. No. Part No. Qty. Description
1 800536* 1 Coin Box
2 160042 1 Coin Box Lock Assembly with Key
3 160136** 1 Key
4 153010 4 Star Washer
5 150005 4 #6-32 x 1/4” Phillips Round Head Machine Screw
6 887011 1 Phase 7 Coin Board
(for models mfd. as of January 26, 2004)
887007 1 Phase 7 Coin Board
(for models mfd. prior to January 26, 2004)
7 852317 1 25¢ U.S. Coin Acceptor Assembly
8 112575 1 Phase 7 Keyboard
9 152014 4 1/4-20 Hex Flange Nut
10 152102 4 Metric Hex Nut
11 137270 1 16” x 1” Large Character Display
12 137250 1 Phase 7 Coin Ribbon Cable
13 855239 1 Phase 7 Dual Coin Computer Panel
14 152014 4 1/4-20 Hex Flange Nut
15 801316* 1 Coin Vault
16 883774 1 Hanke Phase 7 Optic Switch Assembly
* Specify color when ordering.
** Specify key number when ordering.
NOTE: Duplicate ALL components for right hand side of control box.
IMPORTANT: Check label on computer chip to verify correct part number for controller (computer).
Telephone: (508) 678-9000 Fax: (508) 678-9447
Page 8
6
Upper Front Panel Assembly (For Cold Rolled Steel [CRS] Door)
Illus. No. Part No. Qty. Description
1 800635* 1 Right Hand Upper Front Panel Assembly
(includes illus. nos. 1, 2, and 3)
850974* 1 Left Hand Upper Front Panel Assembly
(includes illus. nos. 1, 2, and 3)
884010 1 Right Hand Stainless Steel Upper Front Panel Assembly
(includes illus. nos. 1, 2, and 3)
2 154215 2 1/4” Pop Rivet
3 170330 1 Friction Door Latch
4 112350 1 ADC Logo ONLY
870011 1 Logo Double Tape Kit
5 150313 8 #10-16 x 1/2” TORX + Screw
6 -------- -- Main Door Hinge
(refer to Main Door “Steel” Assembly on page 8)
* Specify color when ordering.
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Page 9
Lower Front Panel Assembly (For Cold Rolled Steel [CRS] Door)
7
Illus. No. Part No. Qty. Description
1 801063* 1 Right Hand Lower Front Panel Assembly
(includes illus. nos. 1 through 4 and 7)
850972* 1 Left Hand Lower Front Panel Assembly
(includes illus. nos. 1 through 4 and 7)
884011 1 Right Hand Stainless Steel Lower Front Panel
(includes illus. nos. 1 through 4 and 7)
2 154215 2 1/4” Pop Rivet
3 170330 1 Friction Door Latch
4 315187 1 Kick Plate Trim
5 150320 6 #10-16 x 3/4” TORX + Screw (black)
150313 6 #10-16 x 1/2” TORX + Screw (silver)
6 -------- -- Main Door Hinge
(refer to Main Door “Steel” Assembly on page 8)
7 882602 1 Lower Front Panel Trim
* Specify color when ordering.
Telephone: (508) 678-9000 Fax: (508) 678-9447
Page 10
8
Main Door “Steel” Assembly
Illus. No. Part No. Qty. Description
1 881150 1 Black Main Door Assembly Complete
(includes illus. nos. 1, 2, and 8 through 15)
2 102354 1 Door Gasket
170731 1 Black Gasket Adhesive (10.3 oz. cartridge)
3 881152 1 Black Top Hinge Block Assembly
(includes illus. nos. 3 and 4)
4 150445 2 1/4-20 x 3/4” Black Cap Head Screw
5 153031 1 1/4” Nylon Washer
6 881151 1 Black Bottom Hinge Block Assembly
(includes illus. nos. 5 through 7)
7 150445 2 1/4-20 x 3/4” Black Cap Head Screw
8 150683 3 1/4-20 x 5/8” Black Carriage Bolt
9 152014 3 1/4-20 Free Spin Wash Nut
10 151010 1 #10-32 Black Hex Acorn Nut
11 150125 1 Door Latch Screw
12 150683 3 1/4-20 x 5/8” Black Carriage Bolt
13 152014 3 1/4-20 Free Spin Wash Nut
14 881210 1 Black Main Door Handle
15 102211 1 20-7/16” Door Glass
170731 1 Black Glass Adhesive (10.3 oz. cartridge)
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Page 11
Main Door Switch Assembly (For Cold Rolled Steel [CRS] Type Door)
9
Illus. No. Part No. Qty. Description
1 150006 2 #6-32 x 7/8” Phillips Pan Head Machine Screw
2 152013 2 #6-32 Hex Nut
3 153010 2 Star Washer
4 137005 1 Door Switch
5 122636 2 Flag Terminal
6 881211 1 Black Main Door Switch Housing
(includes illus. nos. 1 through 3 and 6)
881153 1 Black Main Door Switch Housing Complete
(includes illus. nos. 1 through 4 and 6)
7 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw
Telephone: (508) 678-9000 Fax: (508) 678-9447
Page 12
10
Basket (Tumbler)/Support Assembly
Illus. No. Part No. Qty. Description
1 800831 1 Galvanized Basket and Support Assembly Complete
(includes illus. nos. 1 through 12)
800721 1 Galvanized Basket
(includes illus. nos. 1, 2, 6, 11, and 12)
800891 1 Stainless Steel Basket and Support Assembly Complete
(includes illus. nos. 1 through 11)
800841 1 Stainless Steel Basket
(includes illus. nos. 1, 2, and 6)
2 301315 2 Short Basket (tumbler) Rib ONLY
301316 1 Tall Basket (tumbler) Rib ONLY
301414 2 Stainless Steel Short Basket (tumbler) Rib ONLY
301415 1 Stainless Steel Tall Basket (tumbler) Rib ONLY
3 115986 1 Felt Tumbler Pad
4 100915 3 3/8-16 x 31” Tie Rod
5 153004 3 3/8” Flat Washer
6 154210 30 5/32” x 3/16” Pop Rivet
7 800617 1 Basket (tumbler) Support ONLY
8 152027 3 3/8-16 Hex Nut
9 153005 3 3/8” Lock Washer
10 153004 3 3/8” Flat Washer
11 116003 1 Felt Collar
12 115992 1 Felt Collar
401010 1 #847 Adhesive for Felt Collar (5 oz. tube) (not illustrated)
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Page 13
Lint Drawer Assembly
11
Illus. No. Part No. Qty. Description
1 884209* 1 Lint Drawer Assembly
(includes illus. nos. 1 and 2)
2 117605 3 1/4” x 3/8” Neoprene Sponge Tape
3 160031 1 Lint Drawer Cam
4 160015 1 Lint Drawer Lock Assembly
* Specify color when ordering.
Telephone: (508) 678-9000 Fax: (508) 678-9447
Page 14
12
Lint Drawer Switch Assembly
Illus. No. Part No. Qty. Description
1 800972 1 Lint Drawer Switch Box
(for bottom pocket Only)
2 122002 1 Lint Drawer Switch
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Page 15
Upper Pocket Sensor Bracket Assembly
13
Illus. No. Part No. Qty. Description
1 800769 1 Temperature Sensor Bracket ONLY
855260 1 Temperature Sensor Bracket Complete
(includes illus. nos. 1 through 11)
2 882931 1 Temperature Sensor Probe
(includes illus. nos. 2, 8, 10, and 11)
3 130112 1 225º Thermostat
4 150005 2 #6-32 x 1/4” Round Head Machine Screw
5 153010 2 Star Washer
6 152000 2 #6-32 Hex Nut
7 150309 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw
8 122605 1 4-Pin Connector (female)
9 121300 1 Open/Closed Bushing
10 121494 3 3/16” Push Mount Wire Tie
11 154007 2 1/4” Push On Fastener
Telephone: (508) 678-9000 Fax: (508) 678-9447
Page 16
14
Lower Pocket Sensor Bracket Assembly
Illus. No. Part No. Qty. Description
1 800770 1 Temperature Sensor Bracket ONLY
855261 1 Temperature Sensor Bracket Complete
(includes illus. nos. 1 through 11)
2 882931 1 Temperature Sensor Probe
(includes illus. nos. 2, 8, 10, and 11)
3 130112 1 225º Thermostat
4 150005 2 #6-32 x 1/4” Round Head Machine Screw
5 153010 2 Star Washer
6 152000 2 #6-32 Hex Nut
7 150309 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw
8 122605 1 4-Pin Connector (female)
9 121300 1 Open/Closed Bushing
10 121494 3 3/16” Push Mount Wire Tie
11 154007 2 1/4” Push On Fastener
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Page 17
Idler Bearing Assembly
15
Illus. No. Part No. Qty. Description
1 100111 1 5L-650 V-Belt (to basket [tumbler] pulley)
2 101129 1 9” x 2-1/2” Pulley
3 100113 1 4L-400 V-Belt (to motor pulley) for 60 Hz Models ONLY
100115 1 4L-410 V-Belt (to motor pulley) for 50 Hz Models ONLY
4 154301 2 5/16-18 x 1” Allen Setscrew
5 100705 1 3/16” x 3/16” x 1-3/8” Key
6 882777 1 Idler Bearing Assembly Complete
(includes illus. nos. 5 through 9, 11 and 12)
7 150617 2 3/8-16 x 1” Hex Head Machine Bolt
8 153005 2 3/8” Lock Washer
9 153004 2 3/8” Flat Washer
10 --------- - Direct Spark Ignition (DSI) Module Mounting Bracket
(refer to Direct Spark Ignition [DSI] Gas Valve/Burner Assembly
on page 20 and page 21)
11 152004 1 5/16-18 Hex Nut
12 150509 1 5/16-18 x 3” Hex Head Machine Bolt
Telephone: (508) 678-9000 Fax: (508) 678-9447
Page 18
16
Basket (Tumbler) Bearing Assembly
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Page 19
Basket (Tumbler) Bearing Assembly
Illus. No. Part No. Qty. Description
1 880203 1 1-3/8” Flange Bearing
2 153005 4 3/8” Lock Washer
3 152005 4 3/8-16 Hex Nut
4 800981 1 Pillow Block Bearing Assembly Complete
(includes illus. nos. 4 through 15 and 20)
800980 1 Pillow Block Bearing Support ONLY
5 880779 1 1-3/8” Pillow Block Bearing
(includes illus. nos. 5, 10, and 15)
6 150601 2 3/8-16 x 2” Hex Bolt
7 153004 8 3/8” Flat Washer
8 153005 2 3/8” Lock Washer
9 152005 2 3/8-16 Hex Nut
10 154321 2 5/16-24 x 3/8” Black Setscrew
11 152004 4 5/16-18 Hex Nut
12 150621 2 5/16-18 x 1-1/2” Tap Bolt
13 153002 4 5/16” Lock Washer
14 150501 4 5/16-18 x 3/4” Tap Bolt
15 102120 1 Sintered 8 Magnet
16 822735 1 Rotational Sensor Assembly
17 100713 1 1/4” x 1/4” x 7/8” Key
18 101100 1 18” Pulley
19 100111 1 5L-650 V-Belt (to idler assembly)
20 150610 2 5/16-18 x 1-1/2” Allen Setscrew
17
Telephone: (508) 678-9000 Fax: (508) 678-9447
Page 20
18
Motor Mount Assembly
Illus. No. Part No. Qty. Description
1 100604 1 12-1/2” Impellor with 1/2” Bore
2 152006 2 1/2-20 Left Hand Jam Nut
3 153050 * 1/2” S.A.E. Flat Washer
4 100723 1 1/8” x 1/8” x 1-3/8” Key
5 153050 * 1/2” S.A.E. Flat Washer
6 117604 4 1/8” x 3/8” Sponge Tape (sold by the foot)
7 800965 1 Motor Mount ONLY
803967 1 1/2 hp 115-230v 1ø 60 Hz Motor Mount Assembly Complete with Plug Motor
(includes illus. nos. 1 through 7 and 11 through 17)
822526 1 1/2 hp 240v 1ø 50 Hz Motor Mount Assembly Complete with Plug Motor
(includes illus. nos. 1 through 7 and 11 through 17)
803968** 1 1/2 hp 208/230/380/460v 3ø 60 Hz Motor Mount Assembly Complete
(includes illus. nos. 1 through 7, 11, 13 through 17, 22, and 23)
803902** 1 1/2 hp 208/230/380/460v 3ø 50 Hz Motor Mount Assembly Complete
(includes illus. nos. 1 through 7, 11, 13 through 17, 22, and 23)
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Page 21
Motor Mount Assembly (continued)
Illus. No. Part No. Qty. Description
8 150501 4 5/16-18 x 3/4” Hex Head Machine Bolt
9 153002 4 5/16” Lock Washer
10 153001 4 5/16” Flat Washer
11 154000 4 5/16-18 Tinnerman Nut
12 181049 1 1/2 hp 100-230v 1ø 50/60 Motor with Plug
13 150501 4 5/16-18 x 3/4” Hex Head Machine Bolt
14 153002 4 5/16” Lock Washer
15 153001 4 5/16” Flat Washer
16 153001 * 5/16” Flat Washer
17 101131 1 1/2” x 2-1/4” Motor Pulley (for use on 1ø, 60 Hz models Only)
101133 1 5/8” x 2-1/4” Motor Pulley (for use on 3ø, 60 Hz models Only)
101125 1 1/2” x 2-1/2” Motor Pulley (for use on 1ø, 50 Hz models Only)
101130 1 5/8” x 2-1/2” Motor Pulley (for use on 3ø, 50 Hz models Only)
18 100113 1 4L-400 V-Belt (to idler) for 60 Hz Models ONLY
100115 1 4L-410 V-Belt (to idler) for 50 Hz Models ONLY
19 122701 8 Socket Terminal
20 137030 1 8-Pin Housing
122801 1 Pin/Socket Extraction Tool (not illustrated)
21 826316 1 120v 1ø Motor Harness with Plug
826317 1 230v 1ø Motor Harness with Plug
22 100007** 1 1/2 hp 208/230/380/460v 3ø 50/60 Hz Motor
23 120200 1 3/8” x 90º Connector
24 100723 1 1/8” x 1/8” x 1-3/8” Key (for use on 1ø models Only)
100701 1 3/16” x 3/16” x 1” Key (for use on 3ø models Only)
19
* As required.
** Specify voltage when ordering.
Telephone: (508) 678-9000 Fax: (508) 678-9447
Page 22
20
Direct Spark Ignition (DSI) Gas Valve/Burner Assembly
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Page 23
Direct Spark Ignition (DSI) Gas Valve/Burner Assembly
Illus. No. Part No. Qty. Description
1 824142 1 Gas Valve/Burner Tube Mounting Plate ONLY
809313* 1 Natural Gas - Gas Valve/Burner Assembly Complete Less Orifice
(includes illus. nos. 1 and 3 through 18)
809314* 1 Liquid Propane (L.P.) Gas Valve/Burner Assembly Complete Less Orifice
(includes illus. nos. 1 and 3 through 18)
882396** 1 Liquid Propane (L.P.) Conversion Kit with Orifice
2 150300 2 #10-16 x 1/2” Hex Washer TEK Screw
3 141317 1 1/2” Union Elbow
4 318650 1 Notched Pipe Bracket
5 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw
6 128927 1 1/2” 24 VAC (natural gas) Gas Valve
880960 1 1/2” 24 VAC (liquid propane [L.P.]) Gas Valve
7 318650 1 Notched Pipe Bracket
8 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw
9 141235 1 1/2” Single Port Manifold
10 140829 1 #18 Burner Orifice (natural gas Only)
140814 1 #38 Burner Orifice (liquid propane [L.P.] gas Only)
11 153012 1 #8 Internal Star Washer
12 152001 1 #8-32 x 3/8” Hex Nut
13 141131 1 Up-Shot Burner Tube
(includes illus. no. 15)
14 318009 1 Burner Tube Bracket
15 --------*** 1 Flame Spreader
16 150315 2 #6 x 3/8” Phillips Pan Head Machine Screw
17 128917 1 Spark Electrode with High Voltage (HV) Wire
18 128918 1 Flame Sensor Probe
19 121028 1 1/4” Insulated Terminal
20 132607 2 #18 Gauge Red Silicone Wire
21 121028 1 1/4” Insulated Terminal
22 128935 1 Direct Spark Ignition (DSI) Module
23 152013 2 #6-32 Hex Nut
24 824131 1 Direct Spark Ignition (DSI) Module Mounting Bracket
21
* Burner orifice is not included and must be ordered separately.
** Consult factory for elevations over 2,000 feet.
*** Not sold separately.
Telephone: (508) 678-9000 Fax: (508) 678-9447
Page 24
22
Gas Piping Assembly
Illus. No. Part No. Qty. Description
1 318702 1 Top Pipe Support Bracket ONLY
2 150300 2 #10-16 x 1/2” Hex Washer TEK Screw
3 141236 1 Gas Piping Manifold
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Page 25
Gas Burner Assembly
23
Illus. No. Part No. Qty. Description
1 800526 1 Gas Burner Chamber Assembly
(includes illus. nos. 1 through 3)
2 318006 1 Flame Viewing Plate
3 150300 2 #10-16 x 1/2” Hex Washer TEK Screw
4 802502 1 Hi-Limit Bracket Assembly
(includes illus. nos. 4 through 8)
319710 1 Hi-Limit Bracket ONLY
5 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw
6 150001 2 #6-32 x 1/2” Right Hand Machine Screw
7 130301 1 225º Hi-Limit Thermostat
8 151000 2 #6-32 Pal Nut
Telephone: (508) 678-9000 Fax: (508) 678-9447
Page 26
24
Sail Switch Assembly
Illus. No. Part No. Qty. Description
1 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw
2 802803 1 Sail Switch Box Assembly
(includes illus. nos. 2 through 10)
3 154004 1 Twin Speed Nut
4 150300 2 #10-16 x 1/2” Hex Washer TEK Screw
5 802799 1 Sail Switch Box Cover and Bracket
6 122200 1 Sail Switch
7 150303 2 #4 x 3/4” Pan Head Machine Screw
8 105500 1 Sail Switch Actuator Rod
9 319202 1 Sail Switch Damper
10 154002 1 1/8” Push On Fastener
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Page 27
Single-Phase (1ø) Motor, Electrical Relay Panel Assembly
25
Illus. No. Part No. Qty. Description
1 136008 1 or 2 Fuse Holder
2 132475 1 Double Pole 24 VAC Motor Contactor
3 855255 1 Transformer Assembly (120V)
855256 1 Transformer Assembly (208-240V)
4 121010 1 Terminal Lug
5 315293 1 Rear Wire Box Back Plate
6 315294 1 Rear Wire Box Body
7 315300 1 Rear Wiring Box Cover
8 353142* 1 Power Block Mounting Bracket
9 153528* 2 #8-32 x 1/2” Self-Clinching Stud
10 121300* 2 Open/Closed Bushing
11 153012* 2 Star Washer
12 152001* 2 #8-32 x 3/8” Hex Nut
13 120701* 1 4-Position Terminal Block
14 151000* 2 #6-32 Pal Nut
15 150301 11 #8-18 x 7/16” Phillips Pan Head TEK Screw
16 150300 4 #10-16 x 1/2” Hex Washer TEK Screw
17 150009* 2 #6-32 x 1-1/2” Phillips Machine Screw
18 120910 1 Green Ground Screw
19 136049 1 or 2 3/4-amp Slo-Blo Fuse
* Parts for top electric box only.
Telephone: (508) 678-9000 Fax: (508) 678-9447
Page 28
26
3-Phase (3ø) Motor, Electrical Relay Panel Assembly
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Page 29
3-Phase (3ø) Motor, Electrical Relay Panel Assembly
Illus. No. Part No. Qty. Description
1 136008 2 Fuse Holder
2 132495 1 Three Pole 24 VAC Motor Contactor
3 855256 1 Transformer Assembly (208-240V)
4 121010 1 Terminal Lug
5 315293 1 Rear Wire Box Back Plate
6 315294 1 Phase 7 Rear Wire Box Body
7 315300 1 Rear Wiring Box Cover
8 353142* 1 Power Block Mounting Bracket
9 152001* 2 3/8” Hex Nut
10 121300* 2 Open/Closed Bushing
11 153012* 2 Star Washer
12 153528* 4 1/2” Clinch Stud
13 120701* 1 4-Position Terminal Block
14 151000* 2 Pal Nut
15 150301 12 7/16” Phillips TEK Screw
16 150300 4 1/2” Hex TEK Screw
17 150009* 2 1-1/2” Phillips Machine Screw
18 120910 1 Green Ground Screw
19 136057 2 1/2-amp Slo-Blo Fuse
20 120701* 1 4-Position Terminal Block
21 150009* 2 #6-32 x 1-1/2” Phillips Machine Screw
22 153012* 2 Star Washer
23 152001* 2 3/8” Hex Nut
24 353142* 1 Power Block Mounting Bracket
25 121300* 2 Open/Closed Bushing
26 151000* 2 #6-32 Pal Nut
27
* Parts for top pocket electric box only.
Telephone: (508) 678-9000 Fax: (508) 678-9447
Page 30
28
Back Guard Assembly
Illus. No. Part No. Qty. Description
1 311014 2 Upper/Lower Back Guard Assembly
2 150301 16 #8-18 x 7/16” Phillips Pan Head TEK Screw
3 318702 1 Top Pipe Support Bracket ONLY
4 150300 2 #10-16 x 1/2” Hex Washer TEK Screw
5 103500 4 Adjustable Leveling Leg
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Page 31
Exhaust Ducting Assembly
29
Illus. No. Part No. Qty. Description
1 880505 1 Wye Branch Damper Assembly
2 143527 1 6” Round x 7” Oval Straight Boot
3 143539 1 15-1/2” Long x 7” Oval Duct
4 143537 1 7” Oval x 45º Elbow
5 143538 1 6” Round x 7” Oval Straight Boot
6 143536 2 6” Round x 45º Elbow
7 315300 1 Rear Wiring Box Cover
8 143536 2 6” Round x 45º Elbow
9 315300 1 Rear Wiring Box Cover
117505 * Aluminum Duct Tape (sold by the foot) (not illustrated)
* As required.
Telephone: (508) 678-9000 Fax: (508) 678-9447
Page 32
30
Part No. Description
112280 “Clean Lint Screen” Label
112704 “Phase 7.3 Coin Program Location Summary” Label
114001 “Caution - Exhaust/Lint Screen” Label
114006 “Warning - Fire Hazards” Label
114533 “Black/White/Green Ground” Label
120100 3/8” Straight (BX) Connector
120300 3/8” x 45º (BX) Connector
120400 3/8” Red Jacket (BX) Insulator
120500 3/8” Jiffy Clip (BX Retainer Clip)
120600 3/8” Greenfield (BX)
120800 1/4” In-Line Connector
120802 Red Butt Connector
120902 #74B Wire Nut
120903 Crimp-On Wire Nut
121006 #10 Insulated Ring Terminal
121014 1/4” Insulated (female) Terminal
121499 5-1/2” Harness Tie
121500 8” Harness Tie
122804 Manometer (water column test gauge)
170194 Basket (tumbler) Lint Cleaning Brush
404502 White Brush-In-Cap Bottle Touch-Up Paint
404515 Coral Blue Brush-In-Cap Bottle Touch-Up Paint
404516 Ivory Brush-In-Cap Bottle Touch-Up Paint
Additional Parts Available
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Page 33
ADC 450255 2 - 06/15/04 - 0
Loading...