American Dryer Corp AD-235ED User Manual

AD-235ED Parts Manual

24 VAC Phase 5

1999/2000

American Dryer Corporation

88 Currant Road

Fall River, MA 02720-4781

T elephone: [phone] / Fax: [phone]

E-mail: [e-mail]

ADC Part No. 450422

Retain This Manual In A Safe Place For Future Reference

American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is

properly maintained, it will provide many years of safe, efficient, and trouble-free operation.

ONLY qualified technicians should service this equipment.

OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with

the dryer.

The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.

FOR YOUR SAFETY

Do not store or use gasoline or
other flammable vapors or liquids
in the vicinity of this or any other
appliance.

W e have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make
changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or
discontinue models.

POUR VOTRE SÉCURITÉ

Ne pas entreposer ni utiliser d’essence
ni d’autres vapeurs ou liquides
inflammables dans le voisinage de cet
appareil ou de yout autre appareil.

Important

For your convenience, log the following information:

DATE OF PURCHASE ____________________________ MODEL NO. __________________________________________

RESELLER’S NAME _______________________________________________________________________________________

Serial Number(s) ________________________________________________________________________________________

________________________________________________________________________________________

AD-235ED

________________________________________________________________________________________

Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory ,
you can FAX your order to ADC at [phone] or telephone your order directly to the ADC Parts Department at
[phone]. Please specify the dryer model number and serial number in addition to the description and part number, so
that your order is processed accurately and promptly.

The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the
various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.

“IMPORT ANT NOTE TO PURCHASER”

Information must be obtained from your local gas supplier on the instructions
to be followed if the user smells gas. These instructions must be posted in a
prominent location near the dryer.

Table of Contents

Locking Control Door Assembly

For Models Mfd. as of December 14, 1999 ................................................................................. 2

Control Door Assembly

For Models Mfd. prior to December 14, 1999............................................................................. 3

Coin Microprocessor Control Panel/Box Assemblies

For Models Mfd. as of December 2, 1999 ............................................................................... 4, 5

Coin Microprocessor Control Panel/Box Assemblies

For Models Mfd. prior to December 2, 1999........................................................................... 6, 7

T op Front Panel Assembly ...................................................................................................................... 8

Bottom Front Panel Assembly................................................................................................................. 9

Main Door Switch Assembly ................................................................................................................. 10

Main Door Assembly............................................................................................................................ 11

Basket (Tumbler)/Support Assembly ..................................................................................................... 12

Lint Drawer Assembly .......................................................................................................................... 13

Lint Drawer Switch Assembly ............................................................................................................... 14

Upper Pocket Sensor Bracket Assembly............................................................................................... 15

Lower Pocket Sensor Bracket Assembly .............................................................................................. 16

Idler Bearing Assembly ......................................................................................................................... 17

Basket (Tumbler) Bearing Assembly ................................................................................................ 18, 19

T otally Enclosed, Fan-Cooled (T .E.F .C.) Motor Mount Assembly ................................................... 20, 21

Direct Spark Ignition (DSI ) Gas V alve/Burner Assembly ................................................................. 22, 23

Gas Piping Assembly ............................................................................................................................ 24

Gas Burner Assembly ........................................................................................................................... 25

Sail Switch Assembly............................................................................................................................ 26

3-Phase (3Ø) Motor, Electrical Relay Panel Assembly........................................................................... 27

Back Guard Assembly .......................................................................................................................... 28

Exhaust Ducting Assembly .................................................................................................................... 29

Microprocessor Coin Acceptor Listing.................................................................................................. 30

Additional Parts Available ..................................................................................................................... 31

Locking Contr ol Door Assembly

For Models Mfd. as of December 14, 1999

Illus. No. Part No. Qty. Description

1 882463 1 White Locking Control Door Complete

(includes illus. nos. 1, 2, and 3)

882464 1 Almond Locking Control Door Complete

(includes illus. nos. 1, 2, and 3)

882465 1 Blue Locking Control Door Complete

(includes illus. nos. 1, 2, and 3)

2 882601 1 Black Trim

(for models mfd. as of December 14, 1999)

180225 1 Gray Trim (29.65” length)

(for models mfd. prior to December 14, 1999)
3 150201 5 #10-32 x 1/4” Phillips Round Head Machine Screw
4 152103 4 Rivnut
5 150212 4 #10-32 x 5/16” Phillips Pan Head Stainless Steel Machine Screws
6 160040 1 ACE® Control Door Lock
7 160140 1 ACE® Key xx4451

2 American Dryer Corporation 450422-3

Control Door Assembly

For Models Mfd. prior to December 14, 1999

Illus. No. Part No. Qty. Description

1 882413 1 Almond “ADC” Control Door

882412 1 White “ADC” Control Door
882414 1 Blue “ADC” Control Door

2 882415 1 White Control Door

882416 1 Almond Control Door
882417 1 Blue Control Door

3 150212 4 #10-32 x 5/16” Phillips

150309 4 #10-16 x 1/2” Hex Head TEK Crimptite Screw

-- 152103 4 Rivnuts ... Not Illustrated

450422-3 Telephone: [phone] / www.amdry.com 3

Coin Micropr ocessor Contr ol Panel/Box Assemblies

For Models Mfd. as of December 2, 1999

NOTE: Duplicate ALL components for right

hand side of control box.

Illus. No. Part No. Qty. Description

1 112526 1 Coin Keyboard (touch pad) Label Assembly
2 882469 1 Control Panel Assembly Less Acceptor

(includes illus. nos. 1, 2, 10, 11, and 12)

3 882472 1 White Coin Box Complete Assembly Less Lock

882473 1 Almond Coin Box Complete Assembly Less Lock

882474 1 Blue Coin Box Complete Assembly Less Lock
4 160042 1 ACE® Standard Coin Box Lock Assembly ONLY with Key
5 160136* 1 Key ONL Y (for standard coin box lock)
6 ------- 1 Microprocessor Single Coin Acceptor with Optical Switch

(refer to Microprocessor Coin Acceptor Listing on page 30)

7 881163** 1 Optical Switch ONLY (Hanke)

4 American Dryer Corporation 450422-3

Coin Microprocessor Control Panel/Box Assemblies (continued)

For Models Mfd. as of December 2, 1999

Illus. No. Part No. Qty. Description

8 137021*** 3 Microprocessor Socket ONLY
9 137023** 1 Optical Switch Connector ONLY

880772 1 Single Coin Optic Switch Harness
824080 1 Dual Coin Optic Switch Harness

10 137213 1 Phase 5 Coin Controller ONLY

824998 1 Phase 5 Battery Clip
11 153010 2 #6 S tar Washer
12 150005 2 #6-32 x 1/4” Phillips Round Head Machine Screw
13 122706*** 15 Microprocessor Socket ONLY
14 122641 1 15-Pin Microprocessor Connector ONLY

122800 1 Microprocessor (female) Pin Extraction Tool
15 136057 1 or 2 1/2-Amp (slo blo) Fuse
16 150002 1 or 2 #6-32 x 1” Round Head Machine Screw
17 136008 1 or 2 3-Position Fuse Block
18 826329 1 208/240v Transformer Assembly

826326 1 115v Transformer Assembly
19 150301 2 #8-8 x 7/16” Phillips Head TEK Screw
20 150301 2 #8-8 x 7/16” Phillips Head TEK Screw
21 353258 1 Rear Panel Connector Bracket
22 315028 1 Front Electrical Panel

826343 1 Electric Panel Assembly 1 15v

826342 1 Electric Panel Assembly 208v
23 151001 4 #8-32 Pal Nut
24 882699 1 White Coin Vault ONL Y

882700 1 Almond Coin Vault ONL Y

882701 1 Blue Coin Vault
25 153018 4 1/4” Flat Washer
26 152013 4 #6-32 Hex Nut

* Specify key number when ordering.
** For dual coin, double the quantity .
** * Quantity as required.
**** For use on high security coin vault ONLY.

IMPORTANT : Check label on computer chip to verify correct part number for microprocessor controller

(computer).

450422-3 Telephone: [phone] / www.amdry.com 5

Top Front Panel Assembly

Illus. No. Part No. Qty. Description

1 800692* 1 Right Hand Insulated Front Panel Assembly

(includes illus. nos. 1, 2, 3, and 6)
2 154215 2 1/8” Pop Rivet
3 170330 1 Friction Door Latch
4 881053 1 ADC Logo (with adhesive tape)

870011 1 Logo Double Tape Kit

5 150313 8 #10-16 x 1/2” TORX Plus Screw

(for models mfd. as of October 2, 2000)

150309 8 #10-16 x 1/2” Hex Head TEK Crimptite Screw

(for models mfd. prior to October 2, 2000)

400505 - 25IP TORX Plus Tip Bit (for removal of P/N 150313)

6 121405 1 Rubber Grommet

* Specify color when ordering.

6 American Dryer Corporation 450422-3

Bottom Front Panel Assembly

Illus. No. Part No. Qty. Description

1 882418 1 Insulated White Bottom Front Panel W ith T rim

(includes illus. nos. 1 through 6)

882419 1 Insulated Almond Bottom Front Panel With Trim

(includes illus. nos. 1 through 6)

882420 1 Insulated Blue Bottom Front Panel with Trim

(includes illus. nos. 1 through 6)

882432 1 Insulated White Bottom Front Panel Assembly (without trim)

(includes 1, 2, 3, 5, and 6)

882433 1 Insulated Almond Bottom Front Panel Assembly (without trim)

(includes 1, 2, 3, 5, and 6)

882434 1 Insulated Blue Bottom Front Panel Assembly (without trim)

(includes 1, 2, 3, 5, and 6)
2 154215 2 1/8” Pop Rivet
3 170330 1 Friction Door Latch
4 315187 1 Kick Plate Trim
5 150313 14 #10-16 x 1/2” TORX Plus Screw

(for models mfd. as of October 2, 2000)

150309 #10-16 x 1/2” Hex Head TEK Crimptite Screw

(for models mfd. prior to October 2, 2000)

400505 25IP TORX Plus Tip Bit (for removal of P/N 150313)
6 121405 1 Rubber Grommet
7 882602 1 Black Lower Front Panel Trim

450422-3 Telephone: [phone] / www.amdry.com 7

Main Door Switch Assembly

NOTE:Duplicate

Lower Door Switch Assembly.

Illus. No. Part No. Qty. Description

1 152012 2 #6-32 Hex Nut
2 153008 2 #6 Lock Washer
3 137005 1 Single Pole Door Switch
4 121028 2 Insulated Female T erminal
5 154281 2 3/8” Standard Nylon Spacer
6 800448 1 12-1/2” Stainless Steel Main Door Hinge

(includes illus. nos. 6 and 7)
7 153565 2 #6 Stud
8 881246 1 Main Door Switch Housing ONLY
9 150201 2 #10-32 x 1/4” Phillips Pan Head Screw
10 121405 1 Rubber Grommet

8 American Dryer Corporation 450422-3

ALL components for

Main Door Assembly

Illus. No. Part No. Qty. Description

1 881422 1 Black Plastic Main Door Assembly Complete with Mechanical Fasteners

(includes illus. nos. 1 and 5 through 9)
2 800448 4 12-1/2” Stainless Steel Main Door Hinge Assembly
3 150410 4 #10-24 x 3/8” Phillips Pan Head Taptite Screw
4 152014 1 1/4-20 Free Spin Wash Nut
5 102353 1 Main Door Gasket
6 102212 1 20-7/16” Door Glass with Four (4) Holes

170730 1 Main Door Glass Adhesive (10.3 oz. cartridge)
7 150448 4 1/2” Stainless Steel Flat Head Allen Screw
8 170319 4 Door Glass (nylon) Spacer
9 150431 1 Main Door Latch Screw

(#10 x 7/16” dome hex head)

450422-3 Telephone: [phone] / www.amdry.com 9

Basket (T umbler)/Support Assembly

Illus. No. Part No. Qty. Description

1 800831 1 Basket (tumbler) and Support Assembly Complete with Felt Collar

(includes illus. nos. 1 through 11)

800721* 1 Basket (tumbler) ONLY

(includes illus. nos. 1, 2, and 6)

800891 1 Stainless Steel Basket (tumbler) and Support Assembly Complete

with Felt Collar
(includes illus. nos. 1 through 11)

800841* 1 Stainless Steel Basket (tumbler) ONLY

(includes illus. nos. 1, 2, and 6)

2 301315 2 Short Basket (tumbler) Rib ONLY

301316 1 Tall Basket (tumbler) Rib ONLY
301414 2 Stainless Steel Short Basket (tumbler) Rib ONLY

301415 1 Stainless Steel Tall Basket (tumbler) Rib ONLY
3 150518 1 5/16-18 x 3/8” Socket Button Head Screw
4 100902 3 5/16-18 x 31” Tie Rod
5 153001 3 5/16” Flat Washer
6 154210 3 0 5/32” x 3/16” Pop Rivet
7 800617 1 Basket (tumbler) Support ONLY
8 152004 3 5/16-18 Hex Nut
9 153002 3 5/16” Lock Washer
10 153001 3 5/16” Flat Washer
1 1 116003 1 Felt Collar ONL Y

-- 401010 1 #847 Adhesive For Felt Collar (5 oz. tube)

* Felt collar is not included and must be ordered separately.

10 American Dryer Corporation 450422-3

Lint Drawer Assembly

Illus. No. Part No. Qty. Description

1 882421 1 Locking External White Lint Drawer

882422 1 Locking External Almond Lint Drawer
882423 1 Locking External Blue Lint Drawer
882479 1 External White Lint Drawer
882480 1 External Almond Lint Drawer
882481 1 External Blue Lint Drawer

2 882478 1 Lint Drawer Lock Assembly (with MK-100 key)

450422-3 Telephone: [phone] / www.amdry.com 11

Lint Drawer Switch Assembly

Illus. No. Part No. Qty. Description

1 800972 1 Lint Drawer Switch Box (for bottom pocket Only)
2 122002* 1 Lint Drawer Switch

-- 150301 1 #8-18 x 7/16” Phillips Pan Head TEK Screw ... Not Illustrated

(for bottom pocket Only)

Note: duplicate lint drawer switch for upper pocket).

*(

12 American Dryer Corporation 450422-3

Upper Pocket Sensor Bracket Assembly

Illus. No. Part No. Qty. Description

1 882931 1 1/4” Temperature Sensor Probe Assembly

(includes illus. nos. 1 through 4)
2 122605 1 4-Pin Socket Connector ONLY
3 122701 4 Socket Terminal ONLY
4 154007 2 1/4” Tinnerman Push On Fastener
5 150000 2 #6-32 x 1/4” Round Head Machine Screw
6 801428 1 Sensor Bracket Assembly Complete

(includes illus. nos. 1 through 9)

305107 1 Temperature Sensor Bracket ONLY
7 130301 1 225º Manual Reset Thermostat
8 153010 2 # 6 Star Washer
9 152000 2 #6-32 Hex Nut
10 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw
11 122604 1 4-Pin Connector ONLY

--- 122700 4 Pin Terminal ONLY

--- 122801 1 Pin/Socket Extraction Tool

450422-3 Telephone: [phone] / www.amdry.com 13

Lower Pocket Sensor Bracket Assembly

Illlus. No. Part No. Qty. Description

1 800770 1 Temperature Sensor Bracket ONLY

882727 1 Temperature Sensor Bracket Complete

(includes illus. nos. 1 through 11)
2 882931 1 Temperature Sensor Probe
3 1301 12 1 225º Automatic Reset Thermostat
4 150000 2 #6-32 x 1/4” Round Head Machine Screw
5 153010 2 # 6 Star Washer
6 152000 2 #6-32 Hex Nut
7 150309 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw
8 825092 1 Sensor Harness
9 121300 1 Open/Closed Bushing
10 121494 2 3/16” Push Mount Wire Tie
1 1 154007 2 1/4” Tinnerman Push On Fastener

14 American Dryer Corporation 450422-3

Idler Bearing Assembly

Illus. No. Part No. Qty. Description

1 10011 1 1 5L-650 V-Belt (to basket [tumbler] pulley)

(for models mfd. as of March 13, 2000)

100100 1 5L-660 V-Belt (to basket [tumbler] pulley)

(for models mfd. prior to March 13, 2000)
2 101129 1 9” x 2-1/2” Pulley with 3/16” Key
3 100113 1 4L-400 V-Belt (to motor pulley) (for 60 Hz models Only)

100115 1 4L-410 V -Belt (to motor pulley) (for 50 Hz models Only)
4 154301 2 5/16-18 x 5/16” Allen Setscrew
5 100705 1 3/16” x 3/16” x 1-3/8” Key
6 882777 1 Idler Bearing Assembly Complete

(includes illus. nos. 5 through 9 and 11, 12, and 13)
7 150617 2 3/8-16 x 1” Hex Head Machine Bolt
8 153005 2 3/8” Lock Washer
9 153004 2 3/8” Flat Washer
10 --------- - Direct Spark Ignition (DSI) Module Mounting Bracket

(refer to Direct Spark Ignition [DSI] Gas Valve/Burner Assembly on

page 22 and page 23)
11 152004 1 5/16-18 Hex Nut
12 150509 1 5/16-18 x 3” Hex Head Machine Bolt
13 152004 1 5/16-18 Hex Nut

450422-3 Telephone: [phone] / www.amdry.com 15

Basket (T umbler) Bearing Assembly

16 American Dryer Corporation 450422-3

Basket (T umbler) Bearing Assembly

Illus. No. Part No. Qty. Description

1 880203 1 1-3/8” Flange Bearing
2 153005 4 3/8” Lock Washer
3 152005 4 3/8-16 Hex Nut
4 882544 1 Pillow Block Bearing Assembly Complete

(includes illus. nos. 4 through 17)

882545 1 Pillow Block Bearing Assembly Complete with Rotational Sensor

(includes illus. nos. 4 through 18)
882542 1 Pillow Block Bearing Platform ONLY
882543 1 Pillow Block Bearing Platform ONLY

5 880202 1 1-3/8” Pillow Block Bearing

880779 1 1-3/8” Pillow Block Bearing

(for models with optional rotation sensor assembly)

6 150601 2 3/8-16 x 2” Hex bolt
7 153004 2 3/8” Flat Washer
8 153004 2 3/8” Flat Washer
9 153005 2 3/8” Lock Washer
10 152005 2 3/8-16 Hex Nut
11 154326 2 5/16-24 x 3/8” Setscrew
12 152004 2 5/16-18 Hex Nut
13 150621 2 5/16-18 x 1-1/2” Tap Bolt Zinc
14 153002 4 5/16” Lock Washer
15 153004 6 3/8” Flat Washer
16 150501 4 5/16-18 x 3/4” T ap Bolt Zinc
17 102120 1 Sintered 8 Magnet

(for models with optional rotation sensor assembly)

18 824807 1 Rotational Sensor Assembly

(for models with optional rotation sensor assembly)

19 100713 1 1/4” x 1/4” x 1” Key
20 1 01 1 00 1 18” Pulley
21 100111 1 5L-650 V -Belt (basket [tumbler] to idler)

(for models mfd. as of March 13, 2000)
100100 1 5L-660 V-Belt (basket [tumbler] to idler)

(for models mfd. prior to March 13, 2000)

450422-3 Telephone: [phone] / www.amdry.com 17

Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly

Illus. No. Part No. Qty. Description

1 100604 1 12-1/2” Impellor with 1/2” Bore
2 152006 2 1/2-20 Left Hand Jam Nut
3 153050 * 1/2” S.A.E. Flat Washer
4 100702 1 1/8” x 1/8” x 1-1/2” Key
5 153050 * 1/2” S.A.E. Flat Washer
6 117604 4 Neoprene Sponge Tape (sold by the foot)

18 American Dryer Corporation 450422-3

Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly

Illus. No. Part No. Qty. Description

7 850019 1 Motor Mount ONLY

803963 1 1/2 HP, 100-50 Hz 115-230v 1ø 60 Hz Totally Enclosed, Fan-Cooled

(T .E.F.C.) Motor Mount Assembly Complete with Plug Motor

(includes illus. nos. 1 through 7 and 11 through 17)
803961 1 1/2 HP, 240v 1ø 50 Hz Totally Enclosed, Fan-cooled (T.E.F.C.) Motor

Mount Assembly Complete with Plug Motor

(includes illus. nos. 1 through 7 and 11 through 17)
803902** 1 1/2 HP 208/230/380/460v 3ø 50 Hz Totally Enclosed, Fan-Cooled

(T .E.F.C.) Motor Mount Assembly Complete

(includes illus. nos. 1 through 7, 11, 13 through 17, 22 and 23)
880848** 1 1/2 HP, 208/230/380/460v 3ø 60 Hz T.E.F.C. Motor Mount Assembly

Complete (includes illus. nos. 1 through 7, 11, 13 through 17, 22 and 23)

8 150501 4 5/16-18 x 3/4” Hex Head Machine Bolt
9 153002 4 5/16” Lock Washer
10 153001 4 5/16” Flat Washer
11 154000 4 5/16-18 Tinnerman Nut
12 100065 1 1/2 HP, 100-230v 1ø 50/60 Hz Totally Enclosed, Fan-Cooled (T.E.F .C.)

Motor with Plug
100066 1 1/2 HP, 240v 1ø 50 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor

with Plug

13 150501 4 5/16-18 x 3/4” Hex Head Machine Bolt
14 153002 4 5/16” Lock Washer
15 153001 4 5/16” Flat Washer
16 153001 * 5/16” Flat Washer
17 101131 1 1/2” x 2-1/4” Motor Pulley (for use on 1ø, 60 Hz models Only)

10 1133 1 5/8” x 2-1/4” Motor Pulley (for use on 3ø, 60 Hz models Only)
10 1130 1 5/8” x 2-1/2” Motor Pulley (for use on 3ø, 50 Hz models Only)

18 100113 1 4L-400 V-Belt (to idler) For Use On 60 Hz Models ONLY

100115 1 4L-410 V-Belt (to idler) For Use On 50 Hz Models ONLY

19 122701 8 Socket Terminal ONLY
20 137030 1 8-Pin Housing ONLY

122801 1 Pin/Socket Extraction T ool

21 837005 1 120v/1ø Motor Harness with Plug

837006 1 230v/1ø Motor Harness with Plug

22 100007 1 1/2 HP 208/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled

(T.E.F.C.) Motor

23 120200 1 3/8” x 90º Connector
24 100701 1 3/16” x 3/16” x 1” Key (for use on 3ø models Only)

* As required.
** Specifying voltage when ordering.

450422-3 Telephone: [phone] / www.amdry.com 19

Direct Spark Ignition (DSI) Gas Valve/Burner Assembly

Illus. No. Part No. Qty. Description

1 850804 1 Direct Spark Ignition (DSI) Gas Valve/Burner Tube Mounting Plate ONLY

809313* 1 Direct Spark Ignition (DSI) (natural gas) Gas Valve/Burner Assembly

Complete Less Orifice
(includes illus. nos. 1, 3, 5 through 10, and 12 through 21)

809314* 1 Direct Spark Ignition (DSI) Liquid Propane (L.P.) Gas Valve/Burner

Assembly Complete Less Orifice

(includes illus. nos. 1, 3, 5 through 10, and 12 through 21)
2 150300 2 #10 x 1/2” Hex Washer TEK Screw
3 881367 1 Union Shutoff with 1/2” Tail Piece
4 318650 1 Notched Pipe Bracket

20 American Dryer Corporation 450422-3

Direct Spark Ignition (DSI) Gas Valve/Burner Assembly

Illus. No. Part No. Qty. Description

5 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw
6 128927 1 1/2” 24 VAC Redundant (natural gas) Gas Valve

140411 1 1/2” 24 VAC Gas Valve Liquid Propane (L.P.) Conversion Kit
7 318650 1 Notched Pipe Bracket
8 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw
9 141235 1 1/2” Single Port Manifold
10 140828 1 #20 Burner Orifice (natural gas Only)

140811 1 #41 Burner Orifice (liquid propane [L.P.] gas Only)
11 153000 1 #8 Steel Burr
12 152001 1 #8-32 Hex Nut
13 141130 1 Direct Spark Ignition (DSI) Up-Shot Burner Tube
14 318009 1 Burner Tube Bracket (PSE)
15 141109 1 Flame Spreader ONLY
16 150315 2 #6 x 3/8” Phillips Pan Head Machine Screw
17 128917 1 Spark Electrode with High Voltage (HV) Wire

305412 1 Direct Spark Ignition (DSI) Ignitor Gap Feeler Gauge ... Not Illustrated
18 128918 1 Flame Sensor Probe
19 121006 1 #10 Insulated T erminal
20 132607 2 #18 Gauge Red Silicone Wire (sold by the foot)
21 121028 1 1/4” x .032 Insulated T erminal
22 882627 1 ADC Direct Spark Ignition (DSI) Module ONLY (50/60 Hz)

(for models mfd. as of April 17, 2000)

880815 ADC Direct Spark Ignition (DSI) Module ONLY (50/60 Hz)

(for models mfd. prior to April 17, 2000)
23 151000 4 #6-32 Pal Nut
24 835045 1 Direct Spark Ignition (DSI) Module Mounting Bracket

(for models mfd. as of April 17, 2000)

801013 Direct Spark Ignition (DSI) Module Mounting Bracket

(for models mfd. prior to April 17, 2000)
25 152014 1 1/4-20 Free Spin Wash Nut
26 --------- - Idler Bearing Mount

(refer to Idler Bearing Assembly on page 16 and page 17)

--- 874059** 1 ADG-235ED Liquid Propane (L.P.) Conversion Kit with Orifice

* Burner orifice is not included and must be ordered separately.
** Consult factory for elevations over 2,000 feet.

450422-3 Telephone: [phone] / www.amdry.com 21

Gas Piping Assembly

Illus. No. Part No. Qty. Description

1 318702 1 Top Pipe Support Bracket ONLY
2 150300 2 #10 x 1/2” Hex Washer TEK Screw
3 141236 1 Gas Piping Manifold
4 881367 2 Union Shutoff with 1/2” Tail Piece

22 American Dryer Corporation 450422-3

Gas Burner Assembly

Illus. No. Part No. Qty. Description

1 804025 1 Gas Burner/Electric Oven Chamber Assembly

(includes illus. nos. 1, 2, and 3)
2 318006 1 Flame Viewing Plate
3 150300 2 #10 x 1/2” Hex Washer TEK Screw
4 802502 1 Hi-Limit Bracket Assembly

(includes illus. nos. 4 through 8)

319710 1 Hi-Limit Bracket ONLY
5 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw
6 150001 2 #6-32 x 1/2” Right Hand Machine Screw
7 130301 1 225º Manual Reset Thermostat
8 151000 2 #6-32 Pal Nut

450422-3 Telephone: [phone] / www.amdry.com 23

Sail Switch Assembly

Illus. No. Part No. Qty. Description

1 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw
2 802800 1 Sail Switch Box with Cover and Bracket ONLY

(includes illus. nos. 2, 4, and 5)
3 154004 1 Twin Speed Nut
4 150415 2 #10-16 x 1/2” Phillips Round Head Crimptite Screw
5 802799 1 Sail Switch Box Cover and Bracket ONLY
6 122200 1 Sail Switch ONL Y
7 150303 2 #4 x 3/4” Pan Head “A” Machine Screw
8 105500 1 Sail Switch Actuator Rod
9 319206 1 Sail Switch Damper (embossed)
10 154002 1 1/8” Push On Fastener

24 American Dryer Corporation 450422-3

3-Phase (3Ø) Motor, Electrical Relay Panel Assembly

Illus. No. Part No. Qty. Description

1 150300 2 #10 x 1/2” Hex Washer TEK Screw
2 321002 1 Electrical Relay Panel Cover ONLY
3 137015 1 Arc Suppressor (A.S.) Board (capacitor) ONLY
4 132430 1 (208/230/240v , 50/60 Hz) Impellor Contactor Coil - 24 VAC
5 150100 4 #8-32 x 1/2” Round Head Machine Screw
6 150300 2 #10 x 1/2” Hex Washer TEK Screw
7 151001 4 #8-32 Pal Nut
8 311920 1 3-Phase (3ø) Contactor Mounting Bracket ONLY
9 850909 1 Electrical Relay Panel Assembly

(includes illus. nos. 1, 2, and 9)

450422-3 Telephone: [phone] / www.amdry.com 25

Back Guar d Assembly

Illus. No. Part No. Qty. Description

1 311014 2 Upper/Lower Back Guard Assembly
2 150301 16 #8-18 x 7/16” Phillips Pan Head TEK Screw
3 318702 1 Top Pipe Support Bracket ONLY
4 150300 2 #10 x 1/2” Hex Washer TEK Screw
5 103500 4 Adjustable Leveling Leg

26 American Dryer Corporation 450422-3

Exhaust Ducting Assembly

Illus. No. Part No. Qty. Description

1 880505 1 Wye Branch Damper Assembly
2 143527 1 6” Round x 7” Oval Straight Boot
3 143539 1 15-1/2” Long x 7” Oval Duct
4 143537 1 7” Oval x 45º Elbow
5 143538 1 6” Round x 7” Oval Straight Boot
6 143536 1 6” Round x 45º Elbow
7 121104 1 Junction Box ONLY
8 121105 1 Junction Box Cover ONLY

150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw ... Not Illustrated

9 315025 1 Rear Wiring Box Cover ONLY

150300 2 #10 x 1/2” Hex Washer TEK Screw ... Not Illustrated
10 121 1 04 1 Junction Box ONLY
11 121105 1 Junction Box Cover ONLY

150301 2 #8-18 x 7/16” Phillips Head TEK Screw ... Not Illustrated
12 143536 1 6” Round x 45º Elbow
13 315025 1 Rear Wiring Box Cover ONLY

150300 2 #10 x 1/2” Hex Washer TEK Screw

--- 117505 * Aluminum Duct T ape (sold by the foot)

* As required.

450422-3 Telephone: [phone] / www.amdry.com 27

Micropr ocessor Coin Acceptor Listing

NOTE: Coin acceptor listed includes optical switch (Hanke includes Part No. 881143).

Single Coin

*

Part Number Nation Description

881163 United States and Canada 25¢ Hanke Coin Acceptor

*FOR COIN ACCEPT ORS

NOT SHOWN CONSUL T F ACTOR Y

FOR A V AILABILITY

28 American Dryer Corporation 450422-3

Additional Parts Available

Part No. Description

112039 “Black/White/Green Ground” Label
112280 “Clean Lint Screen” Label
112533 “Phase 5 Coin Program Location Summary” Label
114001 “Caution - Exhaust/Lint Screen” Label
114006 “Warning - Fire Hazards” Label
120800 1/4” In-Line Connector
120802 Red Butt Connector
120902 #74B Wire Nut
120903 Closed End Connector
121499 5-1/2” Harness Tie
121500 7” Harness Tie
121503 Harness Tie Mounting Clip
122804 Manometer (water column test gauge)
170194 Tumbler Lint Cleaning Brush
404500 Almond Brush-In-Cap Bottle Touch-Up Paint
404502 White Brush-In-Cap Bottle Touch-Up Paint
404506 Almond “B” Brush-In-Cap Bottle Touch-Up Paint
404507 Cornflower Blue Brush-In-Cap Bottle Touch-Up Paint
404516 Ivory Brush-In-Cap Bottle Touch-Up Paint
404515 Coral Blue Brush-In-Cap Bottle Touch-Up Paint

450422-3 Telephone: [phone] / www.amdry.com 29

ADC 450422 3 - 03/23/05-0