Retain This Manual In A Safe Place For Future Reference
American Dryer Corporation products embody advanced concepts in engineering, design, and safety . If this product
is properly maintained, it will provide many years of safe, efficient, and trouble free operation.
ONL Y qualified technicians should service this equipment.
OBSERVEALL SAFETY PRECAUTIONS displayed on the equipment or specified in the inst allation manual included
with the dryer.
The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.
FOR YOUR SAFETY
Do not store or use gasoline or
other flammable vapors and
liquids in the vicinity of this or
any other appliance.
We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to
make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to
change or discontinue models.
Ne pas entreposer ni utiliser d’essence
ni d’autres vapeurs ou liquides
inflammables à proximité de cet appareil
ou de tout autre appareil.
POUR VOTRE SÉCURITÉ
Important
For your convenience, log the following information:
DATE OF PURCHASE ____________________________________________________MODEL NO. ______________
RESELLER’S NAME _________________________________________________________________________________
Serial Number(s)_____________________________________________________________________________________
Replacement parts can be obtained from your reseller or the ADC factory . When ordering replacement part s from the
factory , you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department
at (508) 678-9000. Please specify the dryer model number and serial number in addition to the description and part
number, so that your order is processed accurately and promptly.
The illustrations on the following pages may not depict your particular dryer exactly . The illustrations are a composite
of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.
“IMPORT ANT NOTE T O PURCHASER”
Information must be obtained from your local gas supplier on the
instructions to be followed if the user smells gas. These
instructions must be posted in a prominent location near the dryer.
Page 3
Table of Contents
Control Door Assembly ...............................................................................................................................................4
Lower Service Door Assembly.....................................................................................................................................5
Coin Microprocessor Control Panel / Box Assemblies ................................................................................................6
Front Panel Assembly.................................................................................................................................................8
N.S. Series Main Door Switch Assembly....................................................................................................................9
Main Door Assembly.................................................................................................................................................10
Tumbler / Support Assemblies ..................................................................................................................................12
T otally Enclosed, Fan-Cooled Motor Mount Assembly ..............................................................................................18
Direct Spark Ignition Gas V alve / Burner Assembly...................................................................................................20
Gas Piping Assembly ...............................................................................................................................................22
Gas Burner Chamber Assembly................................................................................................................................24
Back Guard Assembly..............................................................................................................................................26
Additional Parts Available .........................................................................................................................................28
Page 4
Control Door Assembly
Illus. No.Part No.Qty .Description
1*8802491Control Door Assembly Complete without Lock
(includes illus. nos. 1 through 3 and 7 through 9)
21803131Lower Black Trim Strip (28-3/8” length)
31502015#10-32 x 1/4” Phillips Round Head Machine Screw
41600401ACE
51601401ACE
®
Lock Assembly ONLY without Key
®
Key ONL Y (key no. XX4451)
61120772“Arrow” Label
71803051Upper Black Trim Strip (28-3/8” length)
81502015#10-32 x 1/4” Phillips Round Head Machine Screw
91176043Neoprene Sponge Tape (sold by the foot)
*Specify color when ordering.
4American Dryer Corporation450117-6
Page 5
Lower Service Door Assembly
Illus. No.Part No.Qty .Description
11600011AD-100 Lock Assembly ONLY with Key
1601031AD-100 Key ONLY
216001611-1/4” Lock Cam ONLY
31803051Upper Black Trim Strip (28-3/8” length)
41502015#10-32 x 1/4” Phillips Round Head Machine Screw
51176043Neoprene Sponge Tape (sold by the foot)
61803131Lower Black Trim Strip (28-3/8” length)
7*8802601Lower Service Door Assembly Complete Less Lock
(includes illus. nos. 3 through 8)
81502015#10-32 x 1/4” Phillips Round Head Machine Screw
*Specify color when ordering.
450117-6www.amdry.com5
Page 6
Coin Microprocessor Control Panel / Box Assemblies
NOTE: Duplicate all components on right hand side of control panel / box.
Illus. No.Part No.Qty .Description
11125261Coin Keypad Label Assembly
28001571Phase 4.1 Control Panel Assembly
(includes illus. nos. 1, 2, 10, 11, and 12)
8001031Phase 4.1 Control Panel Assembly with Battery Option
(includes illus. nos. 1, 2, 10, 11, and 12)
38021421Standard Coin Box Assembly Complete
(includes illus. nos. 5 through 7)
8021431High Security Coin Box Assembly Complete
(includes illus. nos. 5 through 7)
4*1600421ACE
1600431ACE
1600221High Security Coin Box Lock Assembly with Key
5*1601121Key (for standard coin box lock)
1601131Key (for high security coin box lock)
6American Dryer Corporation450117-6
®
Standard Coin Box Lock Assembly with Key
®
High Security Coin Box Lock Assembly with Key
Page 7
Coin Microprocessor Control Panel / Box Assemblies
Illus. No.Part No.Qty .Description
6––––––1Microprocessor Coin Acceptor
(refer to Microprocessor Coin Acceptor Listing on page 27)
71370561Optical Switch ONLY (Greenwald)
8**1370213Microprocessor Socket ONLY
8650511Dual Coin Optic Switch Harness ONLY
101530124#8 Star Washer
111371301Phase 4.1 Coin Microprocessor Controller (computer) ONLY
1370311Phase 4.1 Coin Microprocessor Controller (computer) ONLY with Battery Clip
121520014#8-32 Hex Nut
1313702115Microprocessor Socket ONLY
14137020115-Pin Microprocessor Connector ONLY
15137022115-Pin Strain Relief
161503151#6 x 3/8” Phillips Pan Head Screw
171361511Solid State Relay Board
18****136057***1/2-Amp (Slo-Blo) Fuse
191370134Nylon Standoff
208001961Control Panel / Box Assembly Complete for Gas Models ONLY
(includes illus. nos. 17 through 21, 24, and 25)
211503002#10 x 1/2” Hex Washer TEK Screw
221414031Direct Spark Ignition Transformer – 24 VAC
231500022#6-32 x 1” Phillips Round Head Machine Screw
24120715130-Position Terminal Block
251510002#6-32 Pal Nut
261510016#8-32 Pal Nut
278021421Standard Coin Vault ONLY
*Specify key number when ordering.
**Quantity is 3 or 6.
***Quantity is 1 or 2.
**** Check fuse rating for verification.
***** For use on high security coin vault ONLY.
IMPORTANT: Check label on computer chip to verify correct part number for controller (computer).
450117-6www.amdry.com7
Page 8
Front Panel Assembly
Illus. No.Part No.Qty .Description
1*8006921Right Hand Insulated Front Panel Assembly
(includes illus. nos. 1, 2, 3, and 6)
215421521/8” Pop Rivet
31703301Friction Door Catch
41503098#10-16 x 1/2” Hex Head TEK Crimptite Screw
51214051Rubber Grommet
61502012#10-16 x 1/2” Phillips Pan Head Machine Screw
7––––––1N.S. Series Main Door Switch
(refer to N.S. Series Main Door Switch Assembly on page 9)
81123501ADC Logo ONLY
8700111Logo Double Tape Kit
91503001#10 x 1/2” Hex Washer TEK Screw
*Specify color when ordering.
8American Dryer Corporation450117-6
Page 9
N.S. Series Main Door Switch Assembly
Illus. No.Part No.Qty .Description
13132151Door Switch Actuator Arm
28004451N.S. Series Main Door Switch Assembly Complete
(includes illus. nos. 1 through 7)
3132171Main Door Switch Housing
31500252#4-40 x 1” Phillips Pan Head Machine Screw
41530452#4 Lock Washer
51370032N.S. Series Main Door Switch
61530452#4 Lock Washer
71520162#4-40 Hex Nut
450117-6www.amdry.com9
Page 10
Main Door Assembly
Illus. No.Part No.Qty .Description
18814221Black Plastic Main Door Assembly Complete with Mechanical Fasteners
(includes illus. nos. 1 and 5 through 9)
2800448112-1/2” Stainless Steel Main Door Hinge Assembly
31504104#10-24 x 3/8” Phillips Pan Head Taptite Screw
415201441/4-20 Free Spin Wash Nut
51023491Main Door Gasket
6102212120-7/16” Door Glass with 4 Holes
1707301Main Door Glass Adhesive (10.3 oz. cartridge)
717031941/2” Stainless Steel Flat Head Allen Screw
81504484Door Glass (nylon) Spacer
91504311Main Door Latch Screw (#10 x 7/16” dome hex head screw)
18008311Tumbler and Support Assembly Complete with Felt Collar
(includes illus. nos. 1 through 11)
800721*1Tumbler ONLY
(includes illus. nos. 1, 2, and 6)
8008911Stainless Steel Tumbler and Support Assembly Complete with Felt Collar
(includes illus. nos. 1 through 11)
800841*1Stainless Steel Tumbler ONLY
(includes illus. nos. 1, 2, and 6)
23013152Short Tumbler Rib
3013161Tall Tumbler Rib
3014142Stainless Steel Short Tumbler Rib
3014151Stainless Steel Tall Tumbler Rib
315051815/16-18 x 3/8” Socket Button Head Screw
410091533/8-16 x 31” Tie Rod
515300433/8” Flat Washer
6154210305/32” x 3/16” Pop Rivet
78006171Tumbler Support
815200533/8-16 Hex Nut
915300533/8” Lock Washer
1015300433/8” Flat Washer
111160031Felt Collar
4010101#847 Adhesive for Felt Collar (5 oz. tube)
*Felt collar is not included and must be ordered separately.
3051071Temperature Sensor Bracket ONLY
71301031225° Large Automatic Thermostat
81530102#6 Star Washer
91520002#6-32 Hex Nut
101503012#8-18 x 7/16” Phillips Pan Head TEK Screw
1112260414-Pin Connector
121227004Pin Terminal
14American Dryer Corporation450117-6
Page 15
Idler Bearing Assembly
Illus. No.Part No.Qty .Description
110011314L-400 V-Belt (idler to motor)
210112919” x 2-1/2” Pulley with 3/16” Key
315430125/16-18 x 5/16” Allen Setscrew
410010015L-660 V-Belt (idler to tumbler)
510070513/16” x 3/16” x 1-3/8” Key
630185015/8” x 3/4” Idler Shaft
715052931/4-20 x 2-1/4” Carriage Bolt
810021425/8” Flange Bearing
915300731/4” Lock Washer
1015200231/4-20 Hex Nut
1115061723/8-16 x 1” Hex Head Machine Bolt
1215300523/8” Lock Washer
1315300423/8” Flat Washer
1415202015/16-18 Standard Square Nut
1515200415/16-18 Hex Nut
168010101Idler Bearing Assembly Complete
(includes illus. nos. 6 through 17)
1004061Idler Bearing Mount ONLY
1715050915/16-18 x 3” Hex Head Machine Bolt
18–––––––Direct Spark Ignition Module Mounting Bracket
(refer to Direct Spark Ignition Gas V alve / Burner Assembly on page 20)
450117-6www.amdry.com15
Page 16
Tumbler Bearing Assembly
16American Dryer Corporation450117-6
Page 17
Illus. No.Part No.Qty .Description
188020311-3/8” Flange Bearing with Nylock Setscrew
215300543/8” Lock Washer
315200543/8-16 Hex Nut
415050125/16-18 x 3/4” Hex Head Machine Bolt
515300225/16” Lock Washer
615200125/16” Flat Washer
715062125/16-18 x 1-1/2” Hex Head Machine Bolt
815200425/16-18 Hex Nut
980 11 0111-3/8” Bearing Box Assembly Complete
(includes illus. nos. 9, 10, and 13 through 20)
80110311-3/8” Bearing Box and Support ONLY
(includes illus. nos. 9, 10, and 13 through 15)
80110511-3/8” Bearing Box ONLY
108011041Pillow Block Bearing Support
1115061025/16-18 x 1-1/2” Allen Setscrew
1215200425/16-18 Hex Nut
1315050823/8-16 x 3/4” Hex Head Machine Bolt
1415300523/8” Lock Washer
1515200523/8-16 Hex Nut
1615060023/8-16 x 1-1/2” Hex Head Machine Bolt
1788020211-3/8” Pillow Block Bearing with Nylock Setscrew
1815300423/8” Flat Washer
1915300523/8” Lock Washer
2015200523/8-16 Hex Nut
2110071311/4” x 1/4” x 7/8” Key
22101100118” Cast Pulley
2315430125/16-18 x 5/16” Allen Setscrew
2410010015L-660 V-Belt (tumbler to idler)
Tumbler Bearing Assembly
450117-6www.amdry.com17
Page 18
Totally Enclosed, Fan-Cooled Motor Mount Assembly
18American Dryer Corporation450117-6
Page 19
Totally Enclosed, Fan-Cooled Motor Mount Assembly
Illus. No.Part No.Qty .Description
1100604112-1/2” Impellor with 1/2” Bore
215200621/2-20 Left Hand Jam Nut
315305011/2” S.A.E. Flat Washer
410070211/8” x 1/8” x 1-1/2” Key
515305031/2” S.A.E. Flat Washer
61176044Neoprene Sponge Tape (sold by the foot)
78500191Motor Mount ONLY
803967*11/2 hp 100/120-230v 1ø 50/60 Hz Totally Enclosed, Fan-Cooled Motor Mount Assembly
Complete (for use on 60 Hz models Only)
(includes illus. nos. 1 through 7 and 11 through 17)
815050145/16-18 x 3/4” Hex Head Machine Bolt
915300245/16” Lock Washer
1015300145/16” Flat Washer
1115400045/16-18 Tinnerman Nut
12*10006511/2 hp 100-230v 1ø 50/60 Hz Totally Enclosed, Fan-Cooled Motor with Plug
1315050145/16-18 x 3/4” Hex Head Machine Bolt
1415300245/16” Lock Washer
1515300145/16” Flat Washer
16153001**5/16” Flat Washer
1710113111/2” x 2-1/4” Motor Pulley (for use on 60 Hz models Only)
1810011314L-400 V-Belt (motor to idler) (for use on 60 Hz models Only)
191227018Socket Terminal
1228011Pin / Socket Extraction Tool
2013703018-Pin Housing
1228011Pin / Socket Extraction Tool
218370051Low to High Voltage Conversion Harness (120 Volt to 230 Volt)
8370491High to Low Voltage Conversion Harness (230 Volt to 120 Volt)
*Specify voltage when ordering.
**As required.
450117-6www.amdry.com19
Page 20
Direct Spark Ignition Gas Valve / Burner Assembly
20American Dryer Corporation450117-6
Page 21
Direct Spark Ignition Gas Valve / Burner Assembly
Illus. No.Part No.Qty .Description
18508041Direct Spark Ignition Gas Valve / Burner Tube Mounting Plate ONLY
(includes illus. nos. 1, 3 through 9, and 11 through 23)
21503002#10 x 1/2” Hex Washer TEK Screw
38813671Angle Union Shutoff with 1/2” Tail Piece
43186501Notched Pipe Bracket
51503012#8-18 x 7/16” Phillips Pan Head TEK Screw
612892711/2” 24 VAC Direct Spark Ignition Redundant (natural gas) Valve
1404111Direct Spark Ignition Gas Valve Liquid Propane Conversion Kit
73186501Notched Pipe Bracket
81503012#8-18 x 7/16” Phillips Pan Head TEK Screw
914123511/2” Single Port Manifold
101408281#20 Burner Orifice (natural gas)
3054121Direct Spark Ignition Ignitor Gap Feeler Gauge … Not Illustrated
188803301#20 Gauge-7/28 High Voltage Connector and Wire
191520012#8-32 Hex Nut
2012101411/4” Insulated Terminal
211326072#18 Gauge Red Silicone Wire (sold by the foot)
2212102811/4” x .032 Insulated Terminal
2312101411/4” Spade Terminal
248838491Direct Spark Ignition Module
251510004#6-32 Pal Nut
268010131Direct Spark Ignition Module Mounting Bracket
2715201411/4-20 Free Spin Wash Nut
28–––––––Idler Bearing Mount
(refer to Idler Bearing Assembly on page 15)
—874059**1Burner Liquid Propane Conversion Kit with Orifices
*Burner orifice is not included and must be ordered separately.
**Consult factory for elevations over 2,000 feet.
450117-6www.amdry.com21
Page 22
Gas Piping Assembly
Illus. No.Part No.Qty .Description
13187021Top Pipe Support Bracket ONLY
21503002#10 x 1/2” Hex Washer TEK Screw
31412361Gas Piping Manifold
48813672Angle Union Shutoff with 1/2” Tail Piece
22American Dryer Corporation450117-6
Page 23
Sail Switch Assembly
Illus. No.Part No.Qty .Description
11503012#8-18 x 7/16” Phillips Pan Head TEK Screw
28028001Sail Switch Box with Cover and Bracket
(includes illus. nos. 2, 4, and 5)
31540041Twin Speed Nut
41503092#10-16 x 1/2” Hex Head TEK Crimptite Screw
58027091Sail Switch Box Cover and Bracket
61222001Sail Switch
71503032#4 x 3/4” Pan Head “A” Machine Screw
81055001Sail Switch Actuator Rod
93192021Sail Switch Damper (embossed)
1015400211/8” Push-On Fastener
450117-6www.amdry.com23
Page 24
Gas Burner Chamber Assembly
Illus. No.Part No.Qty .Description
18040251Gas Burner / Electric Oven Chamber Assembly
(includes illus. nos. 1, 2, and 3)
23180061Flame Viewing Plate
31503002#10 x 1/2” Hex Washer TEK Screw
48025021Hi-Limit Bracket Assembly
(includes illus. nos. 4 through 8)
3197101Hi-Limit Bracket ONLY
51503012#8-18 x 7/16” Phillips Pan Head TEK Screw
61500012#6-32 x 1/2” Phillips Round Head Machine Screw
71301031225° Large Automatic Thermostat
81510002#6-32 Pal Nut
24American Dryer Corporation450117-6
Page 25
Exhaust Ducting Assembly
Illus. No.Part No.Qty .Description
18805051Wye Branch Damper Assembly
214352716” Round x 7” Oval Straight Boot
3143539115-1/2” x 7” Oval Duct
414353717” Oval x 45° Elbow
514353816” Round x 7” Oval Straight Boot
614353616” Round x 45° Elbow
712 11041Junction Box
812 11051Junction Box Cover
1503012#8-18 x 7/16” Phillips Pan Head TEK Screw … Not Illustrated
93150251Rear Wiring Box Cover
1503002#10 x 1/2” Hex Washer TEK Screw … Not Illustrated
101211041Junction Box
111211051Junction Box Cover
1503012#8-18 x 7/16” Phillips Head TEK Screw … Not Illustrated
1214353616” Round x 45° Elbow
133150251Rear Wiring Box Cover
1503002#10 x 1/2” Hex Washer TEK Screw … Not Illustrated
—117505*Aluminum Duct Tape (sold by the foot)
* As required.
450117-6www.amdry.com25
Page 26
Back Guard Assembly
Illus. No.Part No.Qty .Description
13110142Upper / Lower Back Guard Assembly
215030116#8-18 x 7/16” Phillips Pan Head TEK Screw
33187021Top Pipe Support Bracket
41503002#10 x 1/2” Hex Washer TEK Screw
51035004Adjustable Leveling Leg
26American Dryer Corporation450117-6
Page 27
Microprocessor Coin Acceptor Listing
NOTE: Coin acceptors listed included optical switch (ADC Part No. 137056).
Single Coin*
ADC Part No.NationDescription
125100U.S. and Canada25¢ Optic Coin Acceptor
125127Canada$1 Canadian Optic Coin Acceptor
125101United Kingdom10 New Pence Optic Coin Acceptor
125114United Kingdom20 New Pence Optic Coin Acceptor
125115United Kingdom1 Pound Optic Coin Acceptor
125106France1 French Franc Optic Coin Acceptor
125120France2 French Franc Optic Coin Acceptor
125124France5 French Franc Optic Coin Acceptor
125109Denmark1 Danish Krone Optic Coin Acceptor
125125Netherlands25¢ Guilder Optic Coin Acceptor
125108Australia10¢ Australian Optic Coin Acceptor
125107Australia20¢ Australian Optic Coin Acceptor
125130Australia$1 Australian Optic Coin Acceptor
125123New Zealand50¢ New Zealand Optic Coin Acceptor
125104Japan100 Yen Optic Coin Acceptor
125103—.882 Token Optic Coin Acceptor
125121—.800 Token Optic Coin Acceptor
125129—Muller Token Optic Coin Acceptor
125132Singapore50¢ Singapore Optic Coin Acceptor