American Dryer Corp AD-200 Tilting User Manual
Specifications and Main Features
The model located in the column of gas appliance is ADG-200 tilting\\1-Door\\1-Way Tilt Gas Model.
Maximum Capacity(Dry Weights):200 lbs.
Basket size: Diameter:62.5’’, Depth:42’’ with volume of 74.5 cubic foot.
Drive Motor: 3 HP
Blower Motor(For Gas Model): 7.5...
Door Opening62.5*43’Height
Door Sill Height(Level):37-141/4
Compressed Air: 80 PSI
Compressed Air Connection: 3/8’ EP.T.
Voltage Available:208-460v/3a/3,4w/50/60h
Heat Input: BTU/hr
The estimated weight measured after constructing has 3369lbs.
Air flow: 5300CFM
Inlet pipe size: 1-1/4’’
Steam consumption normal load: 890 lbs/hr
Operating steam pressure: 125 psi max
Steam supply pipe size: 1-1/2’’, Steam return pipe size: 3/4’’
Frequently Asked Questions
Gas supplier responsible for the appliance is fully licensed. However for the installation of the equipment they are to provide appropriate documentation.
In case you encounter any Beginning with the first question, “What is the procedure in case I suspect a gas leak?” Do not try to light any appliance, nor touch any electrical switch, or even use the phone; immediately leave the room and try to contact your gas supplier.
- Is it permitted to use this dryer for drying mop heads?
- Drying heads of this nature in the dryer is not allowed since it can result in a fire risk.
- What type of electrical supply is required for the dryer?
- For it to work, a supply of 208 - 460V, 3A, 3 + 4 W and 50 / 60Hz is necessary.
- What is the highest steam pressure that the dryer can work with?
- The dryer can work up to a maximum steam pressure of 125 PSI.
- How frequently should the lint in the burner area be cleaned?
- Regular programs should be set up to check and clean the vapourator linter in the burner. These programs can also be applied to the exhaust and duct works as well the dryer itself. The periods of these programs can be figured out through past experiences.
User Manual
Loading...