American DJ Scrambler User Manual

American DJ

PROFESSIONALS™

HALOGEN LAMP WARNING!

This fixture is fitted with halogen lamps
which are highly susceptible to damage if
improperly handled. Never touch lamp
with bare fingers as the oil from your
hands will shorten lamp life. Also, never
move fixture until lamp has had ample
time to cool. Remember, lamps are not
covered under warranty conditions.

User Instructions

Thank you for purchasing this
American DJ™ product. For your

convenience this lighting effect has
been lamped and is ready to be used,
there is no assembly required.
Please read the following
instructions before installing or
using your new unit.

Operating Instructions:

Unit is ready to be hung or set on the ground.
After plugging in unit, the lights will react to the
music via the sound active internal microphone.
The Scrambler™ is a compact unit with the case
design and effect of the ADJ Pulsator™. This unit
has a triangular rotating multi-colored dichroic
head, and projects multiple gobo images on the
floor.The Scrambler™ features a removable gobo;
use any of the 35 ADJ gobos. An

impressive lighting effect for DJ’s, small clubs, &

bands.Fan Cooled.
To replace lamp; unscrew knob on the head of

the fixture. Replace bulbs; reassemble.

C a u t i o n ! Always disconnect from main

power before replacing lamps or servicing unit.
Remember to always replace with same lamps
and fuses.

Model: Scrambler™

SPECIFICATIONS:

Lamp: ZB-EXY 82V 250W
Power: 110V/60Hz
Optics: High Quality Dichroics
Ventilation: Fan Cooled
Working Position: Any
Weight: 8 lbs.
Size: 7.5” x 5 “ x 11”

Duty Cycle: 10 min. on 10 min. off

For service, contact your American DJ™ dealer.

American DJ Supply, Inc.™

LOS ANGELES, CA. 90058