American DJ QUATRO II User Manual

American DJ
®
QUATRO II™
Thank you for purchasing this American DJ® product. For your convenience this lighting eff e c t has been lamped and is ready to be used, there is no assembly required. Please read the follow­ing instructions before installing or using your new unit.
Operating Instructions:
The Quatro II™ is a gobo-spot chase projector, and is sound active. Lights will react to the beat of the music. It has an adjustment knob to adjusts sound activation sensitivity, Sold with 4 standard gobos.
User Instructions
HALOGEN LAMP WARNING!
This fixture is fitted with halogen lamps which are highly susceptible to damage if improperly handled. Never touch lamp with bare fingers as the oil from your hands will shorten lamp life. Also, never move fixture until lamp has had ample time to cool. Remember, lamps are not covered under warranty conditions.
Model: Quatro II ™
To focus the image; loosen the nob on the lens case and pull the lens tube until the image is in focus on the surface it is being projected on.
To replace lamps or gobos; remove the two small screws holding the face plate and remove the face. Change the gobo if desired or remove the support ring that holds down the lamp. Remove and replace lamp and reassemble unit.
For service, contact your American DJ™ dealer.
Choose from our list of
optional gobo patterns to
give the look you want!
SPECIFICATIONS:
Lamp: 4 x 12V 50W ZB-EXN Power: 110V/60Hz Colors: Red, Blue, Green, &
Optics: High Quality Glass
Lens Ventilation: Convection Working Position: Any Weight: 6lbs. Size:15 1/2” x 7 1/2 “ x 5 3/4”
C a u t i o n ! Always disconnect from main
power before replacing lamps or servicing unit. Remember to always replace with same lamps and fuses.
American DJ
LOS ANGELES, CA. 90058
®
Loading...