American DJ
OCTO OCTO
BEAMtm
This product is a chase controller of 8 movable red laser diode, which allows you to control the
chase patterns, speed, motor movement and laser beam. This product has 9 built-in chase
patterns and 8 adjustable speeds, any of the 9 patterns can be operated in Audio/Chase mode.
The motor movement can be operated in Music/ Auto mode. Also, the laser beam can chase
or be full on.
This laser product is great for mobile DJ's, small clubs. Karaoke, home use, or special effects
occasions.
R
User User
WARNING: Never Look Directly INTO Laser Beam.
CAUTION: Use of controls, adjustments, or procedures
other than those specified herein may result in hazardous
radiation exposure.
Instructions
OCTO BEAM
Music/Auto motor movement
8 movable laser diodes
9 built-in chase patterns
8 adjustable speeds
Auto Chase
Audio Chase
Sensitivity control
Full on
TM
Technical Specifications:
Power Input ............................................................................................ AC 120V~60Hz, 1A max.
Diode Power ...................................................................................................................... < 5mW
Wavelength ............................................................................................................ 630nm-680nm
Fuse ................................................................................................................ F1A 250V 5x20mm
Dimensions ..................................................................... 282x282x154mm (bracket not included)
Weight ............................................................................................................................... 5.25Kgs
Caution! No user serviceable parts inside do not attempt repairs. In the event your unit should fail,
contact your dealer.
WARNING! This Product must be earthed. Risk of shock hazard, disconnect power before opening.
To prevent fire or shock hazard, do not expose this product to a high temperature or high humidity area.
American DJ
R
24-004-0406
Rev 1.0
OCTO OCTO
BEAMtm
Operating Instructions:
1. Please confirm power input is matched with that specified on this unit.
2. Plug in power cord and turn the power on.
3. Function modes can be selected using Dip switches 1-10.
Motor movement Set dip switch 1 to "ON", the motor will operate depending on the
Music beat detected by the microphone.
Set dip switch 1 to "OFF", the motor will operate automatically.
Laser beam Set dip switch 2 to "ON", 8 laser beams will be in "Full on" mode,
Set dip switch 2 to "OFF", the laser beams will run the chase of
patterns.
Music mode Set dip switch 3 to "ON", the chase patterns will be executed by
The music beat detected by the microphone.
set dip switch 3 to "OFF", the patterns will chase at the speed
you've selected.
Chase mode Set dip switch 4 to "ON", all the 8 patterns will chase in sequence
Continuously.
Set dip switch 4 to "OFF", you can select desired pattern from the
8 patterns using dip switches 5,6 and 7. (See the table.)
Speed mode The chase speed can be controlled by the dip switches 8.9 and
10. (see the table.)
American DJ
R
Operation
Switches
(1~4)
43 2 1
43 2 1
43 2 1
43 2 1
43 2 1
43 2 1
43 2 1
43 2 1
ON
Function
Motor
Laser
Beam
Music
Chase
Music
Auto
Full on
Chase
Audio
Chase
Auto
Manual
109 8 7 6 5 4 3 2 1
Switches
on
(5~7)
76 5
7 6 5
76 5
76 5
76 5
76 5
76 5
76 5
Function
Pattern-1
Pattern-2
Pattern-3
Pattern-4
Pattern-5
Pattern-6
Pattern-7
Pattern-8
Switches
on
(8~10)
109 8
109 8
109 8
109 8
109 8
109 8
109 8
109 8
Function
Speed-1 Slow
Speed-2
Speed-3
Speed-4
Speed-5
Speed-6
Speed-7
Speed-8 Fast
Audio
Sensitivity
4. The audio sensitivity can be controlled by the Sensitivity knob.
min
max