www.americandj.com - Neutron Star™ Instruction Manual Page 2
Thank you for purchasing the Neutron Star™
carton appears to be damaged, carefully inspect your unit for damage
and be sure all accessories necessary to operate the unit have arrived
contact our toll free customer support number for further instructions.
customer support at the number listed below.
To optimize the performance of this product, please
the basic operations of this unit. The Neutron Star™ is a 750 watt
strobe, and is light weight and compact. Up to 16 units may be linked
together and controlled by single controller. A manual dimmer is built
also has an adjustable flash rate knob built on to the unit. For remote
control operation an optional remote control is available from Ameri-
provides a toll free customer
support line, to provide set up help and to answer any question should
you encounter problems during your set up or initial operation. You
Service Hours are Monday through Friday 9:00 a.m. to 5:00
To prevent or reduce the risk of electrical shock or fire, do
There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures
Please do not discard the shipping carton in the trash. Please recycle
Neutron Star™ Introduction
www.americandj.com - Neutron Star™ Instruction Manual Page 4
Neutron Star™ Safety Warnings
www.americandj.com - Neutron Star™ Instruction Manual Page 3
load of 20 amps (10 amps 220v version) is reached. If the fuse needs
replacement, always replace the fuse with same exact type that was
remove, unless otherwise instructed by an authorized American DJ
service technician. Use of a different type fuse from that which is rec-
ommended may cause fire or electric shock and will void the manufac-
To reduce the risk of electrical shock or re, do not expose this unit
electrical cord. This prong is used to reduce the risk of electrical
shock and re in case of an internal short. Do not attempt to oper-
ate this unit if the power cord has been frayed or broken.
serviceable parts inside.
Always be sure to mount this unit in an area that will allow proper
ventilation. Allow about 6” (15cm) between this device and a wall.
This unit is intended for indoor use only, use of this product out-
doors voids all warranties.
Always mount this unit in safe and stable matter.
on, pinched by items placed upon or against them.
the manufacturer. See page 6 for cleaning details.
such as radiators, heat registers, stoves, or other appliances
The fixture should be serviced by qualified service personnel when:
The power-supply cord or the plug has been damaged.
The unit has been exposed to rain or water.
The unit does not appear to operate normally or exhibits a
The Neutron Start™ carries a one year (365 days) limited warranty.
All returned service items whether under warranty or not, must be
freight pre-paid and accompany a return authorization (R.A.) number.
The R.A. number must be clearly written on the outside of the return
the shipping container. If the unit is under warranty, you must provide
a copy of your proof of purchase invoice. You may obtain a R.A. num-
carried out periodically to optimize light output.
side casing every 20 days.
Always be sure to dry all parts completely before plugging the
operates (I.e. smoke, fog residue, dust, dew). In heavy use we rec-
ommend cleaning on a monthly basis. Periodic cleaning will ensure
Neutron Star™ General Instructions
Neutron Star™ Cleaning Instructions
Neutron Star™ Features