GLOBAL® GX
Maintenance free
Quiet,
dependable
operation
Series
SPECIFICATIONS
www.americandryer.com
Vandal resistant
Exceptional
value & reliability
A RECESS KIT is available to
Up to 5 year
limited warranty
OVERVIEW:
THE GX SERIES A UTOMATIC HAN D DRYER S PROVID E A
QUIET AND COMPACT DESI GN TO FIT ANY BUDG ET.
reduce the depth of the dryer
to less than 4” from the surface
of the wall on all models.
construction features:
SERIES COVER & FINISH – One-piece heavy duty,
flame retardant ABS polymer with white finish.
Optional one-piece 18 gauge steel cover finished
with electrostatically applied, chip-resistant white
epoxy finish (M), or chrome-plated satin finish (C).
TAMPER RESISTANT – Tamper resistant screws
secure cover to base. Air intake vents are shielded
for additional safety.
MOTOR – Permanentl y lubr i c a t ed,
main t e n a nce-free, brushless induction motor with
automatic resetting thermal protector. 1/12 HP,
3100 RPM.
AUTOMATIC SENSOR –
design. Microprocessor controlled infrared sensor
turns dryer on when hands are under the outlet for
up to 80 seconds.
RoHS compliant lead-free
GX-C Series Chrome Finish
GX Series White Finish
LESS
THAN
4”
FROM
GX-MR
Recessed Mount
specifications
AIR FLOW 130 CFM (Cubic Feet per Min.)
AIR VELOCITY
AIR TEMP
SOUND LEVEL
DIMENSIONS SURFACE
MOUNTING HEIGHTS
(From floor to bottom
of hand dryer)
WARRANTY:
5 -year limited warranty GX-M/C. 3 -year limited warranty GX.
Includes same day factory repair or part replacement.
See owner’s manual for details.
GX model reference chart
WALL
GX
4500 LFM (Linear Feet per Min.)
130˚F at 72˚F Ambient
63 dB (Quietest in its class)
10-1/8” W x 9-3/8” H x 5 -5/8” D
Men 44”
Women 42”
Children 32” - 42”
Handicapped 36”
HEATING ELEMENT – Constructed of NiChrome
resistance wire with automatic resetting
thermostat. Heating element operates in the
black range for maximum life.
MODEL ELECTRICAL RATINGS
ABS
White
GX1
GX3
Recessed Mounting is available by designating (R )
after model no. or order kit separately.
Steel
White
GX1-M
GX3-M
Steel
Chrome
GX1-C
GX3-C
Volts Amps Watts Hertz
110-120
208-240
12
150 0
6
150 0
50 /6 0
50 /6 0
GX SERIES MOUNTING DIAGRAMS
5-5/8
(143mm)
7/16
(11mm)
8-15/16
(227mm)
MOUNTING HOLES FOR
1/4 (M6) DIA. SCREWS
SAVE 95% VERSUS PAPER TOWELS
GX Series Hand dryers achieve up to a 95% cost savings over
paper towels. These savings are realized by eliminating the
maintenance and operating expenses associated with paper or
linen towels.
FRAME INSIDE
ROUGH OPENING
TRIM PIECE
12-3/4 W X 11-7/8 H
(324mm X 302mm)
2 (51mm) DEPTH OF BOX
Figure 2 - GX-MR Series Recessed Mount
Represented by:
8-3/16
(208mm)
1-7/8 (48mm)
7/16
(11mm)
8-7/16
(214mm)
9-13/16
(249mm)
7/8 (22mm) DIA. IN-WALL
& SURFACE CONDUIT
ENTRANCES
Figure 1 - GX Series Surface Mount
(102mm)
4
FINISHED WALL
ROUGH WALL
OPENING
1 (25mm)
CONDUIT
ENT.
9-5/8 (245mm)
12-3/16
(310mm)
(251mm)
2-5/16
9 1/16
(230mm)
9-7/8
(58mm)
“Our school saved over $21,000
last year with American Dryer!”
GENERAL INFORMATION
DRYER PL ACEMENT :
Dryers should be placed at least 2 feet apart and at least 12” from
washbasin. Do not install dryer over washbasin. Automatic dryers should
be at least 18” above any projection which may interfere with the operation of the automatic sensor.
DRYER INSTALLATION:
Hand dryers require a dedicated circuit (max. 20 amp) and must be
properly grounded. One side of dryer should be mounted to stud. All
surface mount dryers are provided with conduit entrances for both
between wall and surface wiring.
QUANTITY ESTIMATE, HAND DRYER:
Average traffic washroom..............1 dryer per 2 washbasins
Heavy traffic washroom..................1 dryer per washbasin
54” wash fountain...........................4 dryers per sink
American Dryer, Inc.
12932 Farmington Road I Livonia I MI I 48150 I U.S.A.
Toll Free 800.485.7003 U.S. I Ph: 734.421.2400 I Fax 734.421.5580
SHIIPPING WEIGHT: GX 8 lbs, GX-M/C 10 lbs
Printed on Recycled Paper
Web: www.americandryer.com
Email: sales@americandryer.com
© American Dryer, Inc. All Rights Reserved
USC
MADE IN U.S.A.