American Audio XDM-3633 User Manual

XDM-3633
“COMMANDER”
professional preamp mixer
USER INSTRUCTIONS
djs wanted.
Main Features
• 3 phono, 6 line, 3 auxiliaries & 3 mic inputs
• Balanced outputs • Rotary Kills
• Bass, mid, and treble for each channel
• 2 independent microphones with separate bass, mid, & treble with Neutrik™ connection - 1/4” (6.3mm)/XLR
• 2 zones with bass and treble
• Zone 2 is assignable to any of the 4 channels
• Mono/Stereo switches on Master & Zones
• High level headphone output • Cue mixing • Split cue for headphones
• Low cut bass switch / -30dB cut feature for bass
• Auto mute • Talkover level control
• Send & receive for every channel including independent mics ­all selectable at the same time
• Left & right turntable ground connectors conveniently located at each end of the rear panel
• Master level LED display w/ peak hold
• Pre Fader Levels (PFL) for each channel
• Accurate beat LED’s for easy crossfades • On/Off switch for channel assign
• LED display for each channel • Gain control for each channel
Independent light control output for touch panels and chase controllers -
1/4” connection • Soft-touch rubber knobs for better control
• 12V DC BNC connector for gooseneck light • Rear inset “L” shape case design
• 110V/220V switchable • 2 year limited warranty
XDM-3633
“COMMANDER”
© American DJ® AUDI O Los Angeles, CA 90058 USA
Specifications subject to change without notice.
XDM-3633 User Instructions page 2
professional products designed for the working dj.
The Ultimate DJ & Club Mixer!
Index
• Safety Instructions..................................................................................p.3
• Operating Determinations.......................................................................p.4
• Connections.............................................................................................p.4
• Functions (Front Panel)........................................................................p.5-6
• Inputs & Outputs (Rear Panel)...............................................................p.7
• Replacing the Crossfader.......................................................................p.7
• Technical Specifications.........................................................................p.7
• Warranty & Service..................................................................................p.8
Thank you for purchasing this American DJ® product. The XDM-3633 Is ready to be
used, there Is no assembly required. Please read the following Instructions before
installing or using your new unit. The XDM-3633 has a 2 year limited warranty!
CAUTION! - Keep this device away from rain and moisture!
Safety Instructions
Always plug in the power last. Make sure that the Power switch is set to the OFF position before connecting other devices to the mixer.
Keep away from heaters and other heating sources!
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch on the mixer immediately. The arising condensation of water might damage your device. Leave the device switched off until it has reached room temperature.
Never put any liquids on the mixer or close to it. Should any liquid enter the device, disconnect from main power immediately. Have the device checked by a qualified service technician before operating again. Any damage caused by liquid entering the device is not subject to warranty!
Never let the AC cord come in contact with other cables! Handle the AC cord and all AC connections with particular care.
Make sure that the available voltage is not higher than stated on the AC voltage selector (50).
Before the device is switched on, all fader and volume controls should be set to 0 (zero) or minimum position.
Damages caused by manual modifications to the device or unauthorized operation by unqualified persons are not subject to warranty.
There are no user serviceable parts inside the mixer. For maintenance and/or service, contact an authorized American DJ® dealer.
XDM-3633 User Instructions page 3
Loading...
+ 5 hidden pages