American Audio TTD-2500 User Manual

USER INSTRUCTIONS

professional products designed for the working dj.

™

TTB-2500 User Instructions page 2

User Instructions

Thank you for purchasing this American DJ® product. The TTB-2500 requires

some assembly. Please read the following instructions before installing or

using your new unit. The TTD-2500 has a 2 year limited warranty!

CAUTION! - Keep this device away from rain and moisture!

Name of Parts

1. 45-rpm Adapter

2. Turntable Platter

3. Center Spindle

4. Power Switch

5. Start/Stop Button

6. Strobe Dots

7. Target Light

8. LED display for speed indication
Green LED: pitch control (11)
is in center click position and the
speed is quartz-controlled.
Red LED: pitch control (11) is not in
center position.

9. Headshell

10. Speed Select Buttons

11. Pitch Adjustment (+/-10%)

12. Pitch Control Slider

13. Tonearm

14. Anti-skate Knob

15. Counterweight

16. Spare phono cartridge slot

17. Hinge for dust cover

18. Trim control for changing the
range of the pitch adjustment (11, 12).

19. Right RCA output jack (red)

20. Left RCA output jack (white)

21. Ground (GND)

22. Remote Start/Stop 1/4” output
jack

23. Beat output for Beat Analyser

Before Use

Check for the following parts included
in the package with the main unit.

• Turntable Platter • Slip mat

• Dust Cover • 45-rpm adapter

• Counterweight • Headshell

• User instructions

NOTES:

• Do not connect the AC power plug before assembly has
been completed.

• Before turning the power on, make sure once again all the
connections and power voltage settings are correct.
Always turn off the power when connecting or disconnecting.

• Read this manual carefully before using the unit. Be sure to
store the manual in a safe place for future reference.

R

L

GND

REMOTEBEAT

BACK PANEL

22

23

21

20

19

Warranty & Service

The TTB-2500 has a 2 year limited
warranty. Mail in warranty card as
soon as possible.

For service, contact your local
American DJ® Dealer.