American Standard Evolution ANSI Z124.1, Evolution 1599.205, Evolution 9261.019, Evolution ASME A112.19.7M, Evolution 2422V.002 User Manual

Size:
362.43 Kb
Download

EVOLUTION™ 5' x 32"

WHIRLPOOL AND BATHING POOL

HIGH GLOSS

EVOLUTION™ 5' x 32"

Comfortable bathing design with form-fittedbackrest andmolded-inarmrests

2422VC Whirlpool w/EverClean® System

• EverClean® System

• Deep Soak overflow drain

• 1.4 HP single speed pump/motor

Side-mountedair switch On/Off

• Eight Jet system featuring:

- Two flow adjustable Comfort Jets™ Hi-FloJets

- Six flow adjustable Comfort Jets™ including two in lumbar area

• Two silent air volume controls

• Undermount installation option

• Quick connect whirlpool heater system

(must order whirlpool heater separately)

 

2422V Whirlpool

 

• Same as 2422VC without EverClean System

 

2422V.002 Bathing Pool

 

Nominal Dimensions:

 

60" x 32" x 21-1/2"

 

(1524 x 813 x 546mm)

 

Compliance Certifications -

 

Meets or Exceeds the Following Specifications:

 

• Underwriters Laboratories - Hydromassage

 

Bathtubs UL 1795

 

 

• ASME A112.19.7M for Whirlpool Appliances

Components Required:

• ANSI Z124.1 for Plastic Bathtubs

Bath Filler*: (specify finish)

• ASTM E162 for Flammability

Bath Drain: 1599.205.XXX (specify color)

• NFPA 258 for Smoke Density

 

American Standard whirlpools with EverClean®

Custom Accessories Available:

Safe-T-HeaterWhirlpool Heater: 9075.120

incorporate a patented silver-ionadditive right

5 Foot Apron: 9261.019.XXX (specify color)

into the circulation piping to protect the pipes

Tile Bead Kit: 751755-100

from mold, mildew, algae and fungus that could

 

 

cause deterioration or staining of the pipes.

* See American Standard Faucet Selector

 

For color/finish availability and other faucet choices, please

SEE REVERSE FOR ROUGHING-INDIMENSIONS

see the Product Selector and Pricing Guide.

AND PRODUCT SPECIFICATIONS

NOTE: Whirlpool Heater is designed to maintain water

 

 

temperature during operation. It will not heat cold water to

 

desired bathing temperature.

 

H91

 

© 2008 AS America Inc.

Revised 4/06

 

60 x 32 x 20-1/2 (1524 x 813 x 546mm) 54 Lbs. (27 Kg.)
675 Lbs. (306 Kg.)
74 Gal. (280 L.) 41-1/4 x 22-1/4 In. (1048 x 565mm)

EVOLUTION™ 5' x 32" WHIRLPOOL AND BATHING POOL

HIGH GLOSS

Model 2422VAshown

60"

(1524mm)

 

13-3/4"

 

3"

(349mm)

 

 

 

(76mm)

 

 

 

6"

32"

 

(813mm)

 

(152mm)

 

 

CUT OUT IN FLOOR

 

 

FOR DRAIN

7-3/4"

 

 

(197mm)

 

 

 

3-1/4"

 

 

(83mm)

 

 

11"

 

 

(279mm)

32"

 

 

(813mm)

 

C/L OF

 

 

 

 

OVERFLOW

21-1/2"(H)

 

 

(546mm)

 

20-1/8"(A)

20"(C)

 

 

(511mm)

(502mm)

 

 

 

DIMENSIONS OF FIXTURES ARE NOMINAL AND MAY VARY WITHIN THE RANGE

OF TOLERANCES ESTABLISHED BY ANSI STANDARDS Z124.1 AND A112.19.7.

GENERAL SPECIFICATIONS FOR 2422V WHIRLPOOL

INSTALLED SIZE

 

 

 

 

 

 

 

 

 

 

 

60 x 32 x 21-1/2In.

 

 

 

 

 

 

 

 

 

 

 

 

(1524 x 813 x 546mm)

WEIGHT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

74 Lbs. (34 Kg.)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

WEIGHT w/WATER

 

 

 

 

 

 

 

 

 

 

 

690 Lbs. (313 Kg.)

 

 

 

 

 

 

 

 

 

 

 

GAL. TO OVERFLOW

 

 

 

 

 

 

 

 

 

 

 

 

74 Gal. (280 L)

 

 

 

 

 

 

 

 

 

 

 

 

WHIRLPOOL MIN. OPERATING VOL.

 

 

 

 

 

33 Gal. (125 L)

 

 

 

 

 

BATHING WELL AT SUMP

 

41-1/4x22-1/4In. (1048 x 565mm)

 

BATHING WELL AT RIM

 

 

52-1/4X 26 In. (1327 x 660mm)

 

 

WATER DEPTH TO OVERFLOW

 

 

 

 

18-1/2In. (470mm)

 

 

 

 

FLOOR LOADING

 

 

 

 

52 Lbs./Sq.Ft. (253 Kgs./Sq.m)

 

 

 

 

(PROJECTED AREA)

 

 

 

 

 

 

 

 

 

 

 

WHIRLPOOL ELECTRICAL SPECIFICATIONS

PUMP

1.4 HP, 9.7 AMPS, 120V.

GENERAL SPECIFICATIONS FOR 2422V BATHING POOL

INSTALLED SIZE WEIGHT

WEIGHT w/WATER GAL. TO OVERFLOW

BATHING WELL AT SUMP

BATHING WELL AT RIM

 

 

 

52-1/4x 26 In. (1327 x 660mm)

 

 

WATER DEPTH TO OVERFLOW

 

 

 

18-1/2(470mm)

FLOOR LOADING

 

 

57 Lbs./Sq.Ft. (247 Kgs./Sq.m)

(PROJECTED AREA)

 

 

 

NOTES:

BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE INSTALLATION. SUPPORT OF BATH BY SUMP BEDDING. SUPPORT AND ENCLOSING MATERIAL BY OTHERS.

REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.

FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.

PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1 These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaflet.

 

H92

 

© 2008 AS America Inc.

Revised 3/06