CADET™ 6’ X 36”
WHIRLPOOL & BATHING POOL
HIGH GLOSS ACRYLIC
CADET™ 6’ X 36” WHIRLPOOL & BATHING POOL
2773.018W Whirlpool featuring System I
•Acrylic with fiberglass reinforcement
•Pre-leveled tub bottom
•Form-fitted backrest position
•Dual, molded in arm rests
•2.0 HP single speed, self-draining pump/motor
•Factory installed power cord with plug
•Eight multi-directional and flow-adjustable
jets including:
-Two Ideal-flow jets
-Four body massage jets
-Two recessed back-rest jets
•Deck-mounted air switch On/Off
•Two silent air volume controls
•Quick Connect Safe-T-Heater connection system
•Factory installed and tested whirlpool system
2773.018WC Stay Clean™ Whirlpool Massage Featuring System I:
•Same as 2773.018W except with the StayClean™ whirlpool system featuring Antimicrobial AlphaSan®
2773.002 Bathing Pool only
Nominal Dimensions: 1829 x 908 x 502mm (72” x 35-3/4” x 19-3/4")
Compliance Certifications -
Meets or Exceeds the Following Specifications:
•Underwriters Laboratories - Hydromassage Bathtubs UL 1795
•ASME A112.19.7M for Whirlpool Appliances
•ANSI Z124.1 for Plastic Bathtubs
•ASTM E162 for Flammability
•NFPA 258 for Smoke Density
To Be Specified - Required:
Color:
Bath Filler: (specify finish)
Bath Drain: 1583.470 (specify finish)
To Be Specified - Optional:
Safe-T-Heater*: 9075.120
6 Foot Acrylic Apron: 9372.018 (specify color)
6 Foot Apron: 9272.018 (specify color)
Jet Trim Ring Kit: 9860.200-two per kit (Specify finish)
Universal Tile Bead Kit: 751755-100
Grab Bar Kit: 9822.200-two per kit (specify finish)
NOTE: Roughing-in dimensions and product specifications shown on reverse side of page.
For color/finish availability and other faucet choices, please see the Product Selector and Pricing Guide.
* NOTE: the Safe-T-Heater is designed to maintain water temperature during operation. It will not heat cold water to desired bathing temperature.
BV-23
Rev. 3/03 |
© 2003 American Standard Inc. |