Amana AKR3000E, AKR3000LL, AKR3000SS, AKR3000WW Specification Sheet
Amana Product Information by Fax / Internet
800-843-0304 / http://www.amana.com
Amana Electric Metal Top Cooktops: Fax Document Number: 3021 / 990326
Models AKR3000
General
Recessed Porcelain or Stainless Steel Surface Yes
Easy Clean Lift Up Top with Support Rod Yes
“On” Indicator Lights 4
Removable Electric Coil Elements Yes
Infinite Setting Controls 4
Colors
Black-On-Black w/Black Porcelain Burner Bowls AKR3000E
White-On-White w/Light Gray Porcelain Burner Bowls AKR3000WW
Almond-on-Almond w/Black Porcelain Burner Bowls AKR3000LL
Stainless Steel w/Black Porcelain Burner Bowls AKR3000SS
Elements (Wattage @ 240/208V)
Two 6” Coils (Left Front and Right Rear) 1,500
Two 8” Heavy Duty Coils (Left Rear and Right Front) 2,600
Electrical
Electrical Requirements 240/208 Vac, 60 Hz 3 wire, single phase, 30 Amp
Warranty applies only when product is repaired
Warranty
by an authorized Amana Servicer.
Full 1 year on parts, labor & travel
Limited 2 years parts only
Entire Unit
Limited 5 years on surface elements
Overall Dimensions
W: Width 29 1/2”
D: Depth 21 1/2”
Approximate Shipping Weight 45 lbs.
Cutout Dimensions
W: Width 28 5/8”
D: Depth 19 3/4"
* Please refer to current installation instructions for all installation information
Cutout DimensionsCooktop Dimensions
C
W
D
A
B
D - 19 3/4’”
W - 28 5/8”
A - Leave 2 inches minimum between back of counter
D - 21 1/2”
W - 29 1/2”
top and back edge of cutout.
B - Leave 2 1/2 inches minimum between front of
counter top and front edge of cutout.
C - Leave 3 1/2 inches minimum between side edges of
cutout and vertical side walls extending above
cooking surface.
Minimum Requirement Below Cooktop
3 1/4” from top of counter top to drawer or other
obstruction under counter top.
Amana’s ongoing commitment to quality products may mean a change in product specifications without notice.
Page 1 of 2
Amana Product Information by Fax / Internet
Power Supply
Entry Point
800-843-0304 / http://www.amana.com
Junction Box Location
A - 16 3/4”
B - 15”
C - Power supply entry point
Minimum Clearances to Combustible Material
A - 30” between cooking surface and unprotected wood
or metal cabinet above cooktop. 24” between
cooking surface and protected wood or metal
cabinet
above cooktop. Cabinet bottom must be protected
by at least 1/4” thick millboard with not less than
No. 28 MSG sheet steel, .015” thick stainless
steel, .024” thick aluminum, or .020” thick copper.
B - 1 1/2”
C - 3 1/2” (both sides)
Minimum Cabinet Requirements
Single cabinet installation requires a 36” width base
cabinet.
A
C
B
A
B
Wall Oven and Cooktop Combination Installation Specifications
G
AKR3000, 30” Electric Cooktop Installed Above
AOES3030 or AOCS3040 Wall Oven
H
F
Cooktop and wall oven junction box location indicated in
black.
A - 4 1/2” minimum from top of countertop
B - 8” maximum
E
C - 24” minimum
D - 28 1/2” wall oven cutout width
E - 27 1/4” wall oven cutout height
F - 28 7/8” cooktop cutout width
G - 20 3/4” cooktop cutout depth
H - 4 1/2” from top of countertop to top of wall oven cutout
D
Amana’s ongoing commitment to quality products may mean a change in product specifications without notice.
Page 2 of 2
Centerline
of cabinet
top cutout
A
B
C
Loading...