Aluratek APBL01FB, APBL01FV, APBL01SB User Manual
Portable Battery Charger with LED Flashlight
Quick Start Guide
APBL01FB, APBL01FSB, APBL01FV
aluratek.com
qsg Q10319 / Q10320 / Q10321 Copyright © 2013 Aluratek, Inc. All Rights Reserved.
Product Highlights Operation
USB OUTPUT
5V / 1.0A
LED Flashlight
Charge the battery charger with
the included Micro USB cable
On - Off button with
power level indicators
*Connect your
compatible digital device
for charging
*Original charging cable required
LED flashlight
To turn the LED flashlight on or off, simply press and hold down the
button for two seconds.
Charging the battery pack
The battery is not fully charged and it is highly recommended that you
charge APBL01Fxx before you begin using it.
Note: Using APBL01Fxx “out of the box” will not harm the device. You will
experience reduced battery life as the unit will not be fully charged.
To charge the device, connect the USB end of the cable provided to your
PC and the charger plug to the charging jack of APBL01Fxx. Please
charge the battery for a minimum of (5) hours. The Red LED will be on
while charging. When charging is complete, the red LED will turn off.
Tech Support & Warranty Information Radio and TV Interference Statement
Charging the battery pack
The power status LEDs will light up according to charging capacity.
Empty <30% capacity 30 - 80% capacity >80% capacity
Charging your digital device
Use the original cable that came with your device or a cable with suitable
connector. Connect the USB tip to one of the USB Output ports on the
battery pack. Press the ON / OFF button to start charging the device
If you need further assistance, please contact the Aluratek support
department for troubleshooting prior to returning this device.
E-mail: support@aluratek.com
Web: www.aluratek.com/support
Local (Tustin, CA): 714-586-8730
Toll free: 1-866-580-1978
Aluratek warrants this product against defect in material or workmanship
for 1 Year from the date of purchase.
For more information, please visit: http://aluratek.com/warranty-return-policy
You can register your product online at: http://aluratek.com/product-registration
WARNING!!! This equipment has been tested and found to comply with the
limits of a Class B digital device, pursuant to part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by whatever measures may be
required to correct the interference.
Loading...