Altec lansing IMW1300 QUICK START GUIDE

In the Box

HydraBlast Everythingproof

Wireless Speaker

IMW1300

QUICK START GUIDE

A Closer Look

Power Button

Link Button

Color Change Button

Volume Down/Previous Track

Volume Up/Next Track

IMW1300 HydraBlast Everythingproof

TM

Wireless Speaker

TM

Carabiner

USB-C Charging Cable

Charging

≈3-4 Hours

Full Charge

(red) = Charging

(off

) = Charging

Complete

USB-C Charging

Port

Powering On/
Bluetooth
Pairing

PRESS & HOLD

1-2 SEC

USB Port

Reset

Pairing Mode

Flashing Blue

Place a Qi compatible device on the wireless charging pad to charge it

* Make sure that your device is positioned correctly on your charging pad.
* Make sure that there are no other objects on the charging pad.
* Make sure to remove any phone covers before using the wireless charging.
* When using Qi charging if the volume is >50% it will be automatically reduced to 50% to
conserve battery.

Speaker
Controls

PRESS

Volume Up

+

-

Volume Down

Play/Pause

Answer & End Call

PRESS & HOLD (2 sec)

ON/OFF

Next Track

+

-

Previous Track

Reject Incoming Call

connected

AL HydraBlast

True Wireless
Pairing

Turn on the first speaker and connect It
with a Bluetooth compatible device.

Flashing Green = Pairing

Turn on the second speaker and press the
button.

Solid Green = Paired

Second Speaker

Paired

Solid Blue

PRESS & HOLD

1-2 SEC

Just Ask / Reset

Press

To activate JUST ASK

(Siri or Google Assistant)

Reset- Press & Hold

Disconnect Bluetooth: Press
and hold for five seconds and
the speaker will beep
Reset All connections: Press
and hold for ten seconds and
the speaker will power off

Press and hold the button for 2-3
seconds on the first speaker.
The Link Buttons will illuminate green
indicating the speakers have paired
together.

With the speakers connected, True Wireless uses the

speaker as a left and right channel to create a

* Disconnect TWS function: power off the unit *

cinematic experience.

Light Change
Mode

To toggle between the different light modes:

1. Multicolor slow transition

2. Single color pulse to music

3. Multi color pulse to music

4. Single color slow fade

5. Single color

6. Multicolor cycle changed

Press & Hold the button for 1-2 sec to

change the Strobe light modes.

* off Pulse to music Blink off *

Press

7. Multicolor fast changed
with background color

8. Multicolor slow fade

9. Four color slow fade

10. Four color rotation
with pulse to music

11. Four color rotation

12. Off

Overall battery performance varies dependent upon

use setting, and environmental conditions. For

further information, please visit

www.alteclansing.com

Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to
operate the equipment. This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.

Sakar International Inc.
195 Carter Drive
Edison, New Jersey 08817, USA
855-292-4087
www.alteclansing.com