Alpine VPE-S431 User Manual

FOR CAR USE ONLY / POUR APPLICATION AUTOMOBILE UNIQUEMENT / PARA USO EN AUTOMÓVILES

AUDIO/VISUAL SELECTOR

VPE-S431

• OWNER'S MANUAL
Please read before using this equipment.

• MODE D'EMPLOI
Veuillez lire avant d'utiliser cet appareil.

• MANUAL DE OPERACIÓN
Léalo antes de utilizar este equipo.

R

EN

FR

ES

ES

ALPINE ELECTRONICS MARKETING, INC.

1-1-8 Nishi Gotanda,

Shinagawa-ku,

Tokyo 141-0031, Japan

Phone [phone]

ALPINE ELECTRONICS OF AMERICA, INC.

19145 Gramercy Place, Torrance,

California 90501, U.S.A.

Phone 1-800-ALPINE-1 (1-800-257-4631)

ALPINE ELECTRONICS OF CANADA, INC.

7300 Warden Ave., Suite 203, Markham,

Ontario L3R 9Z6, Canada

Phone 1-800-ALPINE-1 (1-800-257-4631)

(RCS PONTOISE B 338 101 280)
JEIL Moon Hwa Co.
18-6, 3Ga, Pil-dong, Jung-gu, Seoul, Korea

ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.

6-8 Fiveways Boulevarde Keysborough,

Victoria 3173, Australia

Phone [phone]

ALPINE ELECTRONICS GmbH

Frankfurter Ring 117,

80807 München, Germany

Phone [phone]

ALPINE ELECTRONICS OF U.K. LTD.

Fletchamstead Highway, Coventry CV4 9TW,

Alpine House

U.K.

Phone [phone]

ALPINE ELECTRONICS FRANCE S.A.R.L.

(RCS PONTOISE B 338 101 280)

98, Rue de la Belle Etoile, Z.I. Paris Nord Il,

B.P. 50016, 95945 Roissy Charles de Gaulle

ALPINE ELECTRONICS DE ESPAÑA, S.A.

01013 Vitoria (Alava)-APDO 133, Spain

Cedex, France

Phone [phone]

ALPINE ITALIA S.p.A.

Viale C. Colombo 8, 20090 Trezzano

Sul Naviglio (MI), Italy

Phone [phone]

Portal de Gamarra 36, Pabellón, 32

Phone [phone]

Printed in Korea (Y)

68P04190K40-O

IT

SE

Points to Observe for Safe Usage

WARNING

This symbol means important instructions.
Failure to heed them can result in serious
injury or death.

DO NOT DISASSEMBLE OR ALTER.

Doing so may result in an accident, fire or electric shock.

KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE
REACH OF CHILDREN.

Swallowing them may result in serious injury. If swallowed,
consult a physician immediately.

USE THE CORRECT AMPERE RATING WHEN REPLACING
FUSES.

Failure to do so may result in fire or electric shock.

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.

(Check with your dealer if you are not sure.) Failure to do so may
result in fire, etc.

BEFORE WIRING, DISCONNECT THE CABLE FROM THE
NEGATIVE BATTERY TERMINAL.

Failure to do so may result in electric shock or injury due to
electrical shorts.

DO NOT SPLICE INTO ELECTRICAL CABLES.

Never cut away cable insulation to supply power to other
equipment. Doing so will exceed the current carrying capacity of
the wire and result in fire or electric shock.

DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING
HOLES.

When drilling holes in the chassis for installation, take
precautions so as not to contact, damage or obstruct pipes, fuel
lines, tanks or electrical wiring. Failure to take such precautions
may result in fire.

DO NOT USE BOLTS OR NUTS IN THE BRAKE OR
STEERING SYSTEMS TO MAKE GROUND CONNECTIONS.

Bolts or nuts used for the brake or steering systems (or any other
safety-related system), or tanks should NEVER be used for
installations or ground connections. Using such parts could
disable control of the vehicle and cause fire etc.

DO NOT ALLOW CABLES TO BECOME ENTANGLED IN
SURROUNDING OBJECTS.

Arrange wiring and cables in compliance with the manual to
prevent obstructions when driving. Cables or wiring that obstruct
or hang up on places such as the steering wheel, shift lever, brake
pedals, etc. can be extremely hazardous.

USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.

Use for other than its designed application may result in fire,
electric shock or other injury.

MAKE THE CORRECT CONNECTIONS.

Failure to make the proper connections may result in fire or
product damage.

CAUTION

This symbol means important instructions.
Failure to heed them can result in injury or
material property damage.

USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM
SECURELY.

Be sure to use only the specified accessory parts. Use of other
than designated parts may damage this unit internally or may not
securely install the unit in place. This may cause parts to become
loose resulting in hazards or product failure.

DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE
OR DUST.

Avoid installing the unit in locations with high incidence of
moisture or dust. Moisture or dust that penetrates into this unit
may result in product failure.

HAVE THE WIRING AND INSTALLATION DONE BY
EXPERTS.

The wiring and installation of this unit requires special technical
skill and experience. To ensure safety, always contact the dealer
where you purchased this product to have the work done.

ARRANGE THE WIRING SO IT IS NOT CRIMPED OR
PINCHED BY A SHARP METAL EDGE.

Route the cables and wiring away from moving parts (like the
seat rails) or sharp or pointed edges. This will prevent crimping
and damage to the wiring. If wiring passes through a hole in
metal, use a rubber grommet to prevent the wire’s insulation from
being cut by the metal edge of the hole.

1-EN

Feature

This unit is designed to connect to the IVA-D300 series to
expand their functions.
In addition, when this unit is not connected to the IVA-D300
series, it can perform visual effects, switch video output to a
rear monitor connected to this unit, etc.

a Operations can be performed from the IVA-D300 series

when connected. For details, refer to the Owner's
Manual of the IVA-D300 series.

a Operations can be performed from the touch panel

monitor when connected. For details, refer to the
Owner's Manual of the touch panel monitor.

Operation

2

Press the REAR SEL 1 or the REAR SEL 2
switch to select an item from the list below.

AUX-1 → AUX-2 → AUX-3 → DVD PLAYER*1 →
VISUALIZER*

1

*

Displayed only when the IVA-D300 series are
connected.

2

*

Displayed when VISUALIZER is set to other than
OFF.
When the IVA-D300 series are connected, this is
displayed only when VISUALIZER is set to ON in the
IVA-D300 series.

• The AUX NAME set in "SETUP" is displayed for
AUX-1, 2 or 3.

3

Press and hold the REAR SEL 1 or the REAR
SEL 2 switch for more than 2 seconds.

The selected source is displayed on the monitor.

•When RETURN is selected, the display returns to the
one prior to the SOURCE SEL.

2

→ OFF → SETUP → RETURN

This unit can be operated by connecting REAR SEL1 and
REAR SEL 2 leads to a push switch (sold separately). For
details, consult an authorized ALPINE dealer.

REAR SEL

1,2 leads

OK

Push switch, etc.

•Use a switch (sold separately) which has an automatic
return function to connect with REAR SEL 1,2 leads.

•When operating with the Monitor Control 1,2 leads,
connect to a switch (sold separately) as well. The
automatic return function is not necessary. (Refer to
"SWITCHING THE REMOTE SENSOR" page 3.)

Body of

your car

Switching the Output Source

Video output from AUX OUT 1/2 for each monitor can be
switched.

1

Press the REAR SEL 1 or the REAR SEL 2
switch.

The SOURCE SEL. display appears.

SOURCE SEL.

AUX- 1
AUX- 2
AUX- 3
DVD PLAYER
VISUALIZER
OFF
SETUP
RETURN

REAR SEL 1: The source of the external monitor

connected to the AUX OUT 1.

REAR SEL 2: The source of the external monitor

connected to the AUX OUT 2.

2-EN

SETUP

Each setting can be performed by the procedure shown below.
The setup menu is common for both REAR SEL 1 and
REAR SEL 2.

•When IVA-D300 series is connected, the VISEAL EFFECT,
VISUALIZER and AUX IN-1, 2, 3 NAME cannot be set in
this unit. Set these functions in the IVA-D300 series.

1

Press the REAR SEL 1 or the REAR SEL 2
switch.

The SOURCE SEL. display appears.

2

Press the REAR SEL 1 or the REAR SEL 2
switch to change the setting item. Select
SETUP.

3

Press and hold the REAR SEL 1 or the
REAR SEL 2 switch for more than 2 seconds.

The SETUP display appears.

4

Press the REAR SEL 1 or the REAR SEL 2
switch to select the desired setting item.

VISUAL EFFECT → VISUALIZER →
AUX IN-1,2,3 SIGNAL → AUX IN-1,2,3 NAME
→ RETURN

5

Press and hold the REAR SEL 1 or the
REAR SEL 2 switch for more than 2 seconds
to change the setting.

6

After settings, press the REAR SEL 1 or the
REAR SEL 2 switch to select RETURN, and
press and hold the switch for more than 2
seconds.

The SOURCE SEL. display is restored. To return to
normal mode, select RETURN again, and press
and hold the switch for more than 2 seconds.
Either VISUAL EFFECT or VISUALIZER will start if
set to on.