This symbol means important instructions.
Failure to heed them can result in serious
injury or death.
DO NOT OPERATE ANY FUNCTION THAT TAKES
YOUR ATTENTION AWAY FROM SAFELY DRIVING
YOUR VEHICLE.
Any function that requires your prolonged attention
should only be performed after coming to a complete stop.
Always stop the vehicle in a safe location before
performing these functions. Failure to do so may result in
an accident.
DO NOT DISASSEMBLE OR ALTER.
Doing so may result in an accident, fire or electric shock.
USE THIS PRODUCT FOR MOBILE 12V APPLICA TIONS.
Use for other than its designed application may result in
fire, electric shock or other injury.
KEEP SMALL OBJECTS SUCH AS BATTERY OUT OF
THE REACH OF CHILDREN.
Swallowing them may result in serious injury. If
swallowed, consult a physician immediately.
CAUTION
This symbol means important instructions.
Failure to heed them can result in injury or
material property damage.
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
Failure to do so may cause personal injury or damage to
the product. Return it to your authorized Alpine dealer or
the nearest Alpine Service Center for repairing.
DO NOT MIX NEW BATTERIES WITH OLD
BATTERIES. INSERT WITH THE CORRECT BATTERY
POLARITY.
When inserting the batteries, be sure to observe proper
polarity (+ and –) as instructed.
Rupture or chemical leakage from the battery may cause
fire or personal injury.
USE THE CORRECT AMPERE RATING WHEN
REPLACING FUSES.
Failure to do so may result in fire or electric shock.
2-EN
PRECAUTIONS
Temperature
Be sure the temperature inside the vehicle is between
+45°C (+113°F) and 0°C (+32°F) before turning your unit
on.
Fuse Replacement
When replacing the fuse(s), the replacement must be of
the same amperage as shown on the fuse holder. If the
fuse(s) blows more than once, carefully check all
electrical connections for shorted circuitry. Also have your
vehicle’s voltage regulator checked.
Maintenance
If you have problems, do not attempt to repair the unit
yourself. Return it to your Alpine dealer or the nearest
Alpine Service Station for servicing.
Installation Location
Make sure the TUE-T152 will not be exposed to:
• Direct sun and heat
• High humidity
• Excessive dust
• Excessive vibrations
FR
ES
3-EN
DE
IT
SE
Controls on remote control
MANUAL
1
2
3
4
5
PWR (Power) button
1
PWR
BAND
CALL
A.MEMO
MODEWRITE
P.SCAN
REMOTE CONTROL UNIT
Press the button to turn the TV tuner unit power
on/off.
6
7
8
9
p
q
w
button
8
Press the button to automatically seek for a
channel downward.
button
9
Press the button to automatically seek for a
channel upward.
button
p
Preset channel is called each time the button is
pressed. TV area is selected on the TV area
setting screen.
WRITE button
q
The channel searched by “Manual Channel
Selection” or “Auto Seek Tuning” can be
memorized by pressing the button for at least 1
second.
MODE button
w
Press the button until the TV area setup menu
appears.
BAND button
2
Press the button and the band will change as
shown below .
TV3 TV1 TV2
CALL button
3
Press the button to display channel No. being
received for approx. 5 seconds.
The channel memorization list is displayed for
approx. 5 seconds by pressing the button again
during channel No. display.
A.MEMO button
4
Press the button to automatically memorize
channels receivable.
P.SCAN button
5
Press the button to receive channels for 5
seconds each by scanning the channels
receivable from among memorized channels.
MANUAL station-selection button
6
Press the button to move downward or upward
one step respectively until the desired station
frequency.
Press and hold the button to determine the TV
area.
button
7
Preset channel is called each time the button is
pressed. A TV area is selected on the TV area
setting screen.
4-EN
Loading...
+ 12 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.