FOR CAR USE ONLY/NUR FÜR AUTOMOBIL GEBRAUCH/POUR APPLICATION AUTOMOBILE
UNIQUEMENT/SOLO PER L’UTILIZZO IN AUTOMOBILE/PARA USO EN AUTOMÓVILES/ALLEEN VOOR
GEBRUIK IN DE WAGEN/ENDAST FÖR BILBRUK/KUN TIL BRUG I BILEN
R
DVD NAVIGATION MAP/NAVIGATIONSKARTEN-DVD/CARTE DE NAVIGATION DVD
DVD MAPPE PER LA NAVIGAZIONE/MAPA DE NAVEGACIÓN DEL DVD/DVD NAVIGATIEKAART
DVD NAVIGERINGSKARTA/DVD-NAVIGATIONSKORT
EN
Prog. Ver. V3.00
SMART MAP PRO
OWNER'S MANUAL
Please read before using this disc.
MODE D'EMPLOI
Veuillez lire avant d'utiliser ce disque.
BEDIENUNGSANLEITUNG
Lesen Sie diese Bedienungsanleitung bitte vor
Gebrauch der Disc.
ISTRUZIONI PER L'USO
Si prega di leggere prima di utilizzare il disco.
NVD-V003/NVD-V004
MANUAL DE OPERACIÓN
Lea este manual antes de utilizar este disco.
GEBRUIKSAANWIJZING
Lees de gebruiksaanwijzing zorgvuldig door alvorens
u de disk in gebruik neemt.
ANVÄNDARHANDLEDNING
Läs igenom handledningen innau du använder den
här skivan.
BRUGERVEJLEDNING
Læs venligst denne vejledning for du tager denne
DVD i brug.
DE
FR
IT
ES
NL
SE
DK
Table of Contents
Searching For Destination
Searching for a destination from its post code ........................................2
Customizing Setups
Setting the Current Time .........................................................................3
Setting the arrival time display ................................................................3
Tr affic Information in the UK provided by ITIS Holdings Plc.
Before Using the Disc
• This Supplementary Owner's Manual explains about the newly added
functions to the new-version of the map disc.
Please thoroughly read this Manual before starting operation.
• Operating System Programme Rewriting
1) Insert the upgrade disc into your navigation system.
2) The operating system will automatically be rewritten.
3) The opening screen appears in the display.
Confirm that the programme version is changed.
Note:
If you want to use an earlier disc having already inserted the upgrade disc, insert the earlier disc and
then turn off the car's ignition once before using.
• Please be aware that titles and messages shown on the screen may
vary slightly from those of Prog. Ver.2.00 due to improvements and
updates. These differences do not affect operation.
• The RDS-TMC receiver box TMC-001P can be connected to utilize
RDS-TMC. For details of operation, please refer to the TMC-001P
Owner’s Manual.
• Expanded the recording area of the map
Maps of Ireland, North Ireland and Norway have been added.
• The "Motorway Allow" setting is recommended when searching for a
long distance route.
1-EN
Searching For Destination
Searching for a destination from its
post code
You can search for a destination by inputting
the post code. (This function may not be
used in some regions.)
1 Press the MENU button to display the main
menu. Select "Destination" from the main
menu by tilting the joystick and press
ENTER.
2 The sub-menu for "Destination" appears.
Select "Post code" by tilting the joystick and
press ENTER.
3 The post code input screen appears.
Input the desired post code by tilting the
joystick.
6 The street list is displayed.
Select a desired street by tilting the joystick
and press ENTER.
Note:
If the post code and street cover more than one city,
first the city list is displayed and then select a desired
city.
7 The house no. input screen appears.
Tilt the joystick to input the house no., select
"OK" and then press ENTER.
Note:
If a house no. searched from post code or street name
has not been memorized in the database, a map of the
vicinity is displayed.
4 The inputted post code list is displayed.
Select a desired post code and press
ENTER.
5 The street input screen appears.
Input a desired street name by tilting the
joystick.
8 The searched destination with the point
setting menu is displayed.
2-EN
Customizing Setups
Setting the Current Time
You can display the current time calculated
from GPS information.
You can also correct the time difference from
Greenwich Mean Time.
1 Press the MENU button to display the main
menu. Select "Set up" from the main menu
by tilting the joystick and press ENTER.
2 The "Set up" screen appears.
Clock
Displays the clock on the map screen.
GMT
Corrects the current time if there is any time
difference from GMT.
3 When the settings have been completed,
select "OK" by tilting the joystick and press
ENTER.
Setting the arrival time display
When "Estimated travel time" is set to "On,"
you can select the setting between
"Estimated travel time" and "Est. time to
Destination" on the screen display.
1 Press the MENU button to display the main
menu. Select "Set up" from the main menu
by tilting the joystick and press ENTER.
2 The "Set up" screen appears.
Estimated travel time
Est. Time to Destination
3 When the settings have been completed,
select "OK" by tilting the joystick and press
ENTER.
Current time display
Example display for estimated travel time
Example display for Estimated time to destination
3-EN
Others
Automatic dial operation
If your navigation system is connected to the
Nokia 6090 (GSM 900 Car Phone), you
can automatically dial to the "Point of Interest"
(POI) and "Memory Points" that you have
already placed in memory.
Note:
To connect the navigation system, you need a NaviNokia 6090 cable (KCE-6090P).
Please be aware that the telephone numbers of items
registered on the disc may change day by day, and
they are not always correct.
Automatic Dialling from a Point of
Interest item
1 Press the MENU button to display the main
menu. Select "Destination" from the main
menu by tilting the joystick and press
ENTER. Select "POI" from the sub-menu by
tilting the joystick and press ENTER.
2 Refer to "Searching for a point of interest
(POI)" in the Owner's Manual (Prog. Ver.
2.00) and search for a desired POI item.
Then display the screen map.
3 Select "Call" by tilting the joystick and press
ENTER.
Automatic Dialling from a Memory Point
1 Press the MENU button to display the main
menu. Select "Destination" from the main
menu by tilting the joystick and press
ENTER. Select "Memory point" from the
sub-menu by tilting the joystick and press
ENTER.
2 Refer to "Searching from memory points" in
the Owner's Manual (Prog. Ver. 2.00) and
search for a desired Memory Point. Then
display the screen map.
3 Select "Call" by tilting the joystick and press
ENTER.
Note:
You cannot "Call" when the telephone number is not
registered to Memory Points.
4 The number is automatically dialled, and the
telephone is connected.
5 To disconnect the telephone, press
RETURN.
Note:
If the telephone is not connected due to busy line or
some other cause, a message will be displayed.
Note:
You can also "Call" from the "POI information"
screen after selecting "Info."
4 The number is automatically dialled, and the
telephone is connected.
5 To disconnect the telephone, press
RETURN.
Note:
If the telephone is not connected due to busy line or
some other cause, a message will be displayed.
To delete the message, press RETURN.
4-EN
Viewing GPS screens
GPS satellite information being received is
displayed on the screen. If the error for the
vehicle's current position is too large, check
how many GPS satellites you are receiving.
Furthermore, you can confirm the status of
the Speed Pulse, ACC Power, Parking brake,
illumination (status of the vehicle lights) etc.
1 Press the MENU button to display the main
menu. Select "GPS mark" from the main
menu by tilting the joystick and press
ENTER.
GPS mark
2 The GPS information screen is displayed.
Confirm the setting of each item.
Blinks when the Speed Pulse signal
is being input.
Tip
"GPS" indicates the number of GPS satellites being
received.
3 Press the POS. button to return to the
current vehicle position screen.
5-EN
R
ALPINE ELECTRONICS MARKETING, INC.
1-1-8 Nishi Gotanda,
Shinagawa-ku, Tokyo 141-0031, Japan
Phone 03-5496-8231
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place, Torrance,
California 90501, U.S.A.
Phone 1-800-ALPINE-1 (1-800-257-4631)
1-888-NAV-HELP (1-888-628-4357)
ALPINE ELECTRONICS OF CANADA, INC.
777 Supertest Road, Toronto,
Ontario M3J 2M9, Canada
Phone 1-800-ALPINE-1 (1-800-257-4631)
1-888-NAV-HELP (1-888-628-4357)
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
161-165 Princes Highway, Hallam
Victoria 3803, Australia
Phone 03-8787-1200
ALPINE ELECTRONICS GmbH
Frankfurter Ring 117,
80807 München, Germany
Phone 089-32 42 640
ALPINE ELECTRONICS OF U.K. LTD.
Alpine House
Fletchamstead Highway,
Coventry CV4 9TW, U.K.
Phone 0870-33 33 763
Yamagata Printing Co., Ltd.
2-6-34, Takashima,
Nishi-ku, Yokohama,
Kanagawa, Japan
ALPINE ELECTRONICS FRANCE S.A.R.L.
(RCS PONTOISE B 338 101 280)
98, Rue de la Belle Etoile, Z.I. Paris Nord Il,
B.P. 50016, 95945 Roissy Charles de Gaulle Cedex, France