Page 1
• Mercedes A-Class (W169) 2005->
• Mercedes B-Class (T245) 2005->
• Mercedes Viano / Vito (W639 / V639)
Compatible with these Alpine navigation devices
INE-W928R
Mounting Frames for
1
A-Class / B-Class
Installation Manual
INE-W928R Kit
colour: black
KIT-8MB / KIT-8MBF
KIT-8MBI / KIT-8MBM
Mounting Frames for
2
Viano / Vito
3
• (1) Mounting Frames for A-Class / B-Class
• (2) Mounting Frames for Viano / Vito
4 5
• (3) Facia plate
• (4) countersunk at head tapping screw
• (5) recessed countersunk at head screw
Page 2
Mercedes A-Class / B-Class
1. Insert pulling hooks into air
vent catches. Pull out air vents
air vent catches
2. Disconnect plugs for hazard
light switch
3. Remove air vents completely
4. Unclip and remove lower panel
Page 3
Mercedes Viano / Vito
4. Mount facia plate and
mounting frames to double
DIN head unit
Connect all required
circuit points and push
double DIN head into dash
board
Mercedes A-Class / B-Class
5. Remove four torx screws
Remove OEM head unit
5. Clip OEM trim panel on dash
board to nish installation
6. Mount facia plate and
mounting frames for A-Class /
B-Class to Alpine INE-W928R
Page 4
Mercedes A-Class / B-Class
7. Connect all required
circuit points and push
double DIN head into dash
board
Reinstall everything in reverse
order to nish installation.
Mercedes Viano / Vito
1. Vehicle with OEM head unit.
Remove OEM trim panel
surrounding the radio.
2. Remove the four screws at the top
and bottom of OEM head unit.
3. Remove the OEM head unit.
All installation work must be performed by a qualied professional installer only.
The manufacturer / dealer is not liable for any kind of incidential or indirect damages.
Loading...