Alpha SF401EX Specsheet

Product Specification Sheet APS693 - Rev. 07/2013

SF401EX Strain Relief Cable / Extender (8-pin DIN type)SF401EX Strain Relief Cable / Extender (8-pin DIN type)

387 CANAL STREET • NEW YORK • NY • 10013-1615 • Phone: [phone] • Fax: [phone] CANAL STREET • NEW YORK • NY • 10013-1615 • Phone: [phone] • Fax: [phone]

Web: www.canalalarm.comWeb: www.canalalarm.com

Copyright © 1998-2 017 Alpha Communication s® - All Righ ts Reserved.

Due to c ontinuo us product i mprovement, all col ors, sizes, materials, finishes and sp ecifications are subject to change witho ut not ice.

SpecificationsSpecifications

Length: 6.0" (153mm)

Construction:

24-gauge polyvinyl­covered cord
with molded ends
(Male/Female)

Connections:

Connections: 8-pin
'DIN' plugs

SF401EX Strain Relief CableSF401EX Strain Relief Cable

The Alpha Communicat ions® / TekTone SF401EX Strain Relief Cable is used to increase the
life span of c all cords, pillow speakers and room stations. T he c able is placed between the
call c ord or pillow speaker and the room stat ion.

If the call cord or pillow speaker is att ac hed to a bed and then t he bed is pulled away,
the strain relief c able disconnect s. T his prevents damage to both the room station and the
call c ord or pillow speaker.

The SF401EX is typically used with the NC300 , NC300II and TC400 nurse-call syst ems
where an 8-pin 'DIN' type jac k is used at the patient bed station(s). Typically they are used
with the IR319B, IR320B, IR411, IR411EPB, IR412, and IR412EPB or similar patient stations.

FeaturesFeatures

UL 1069 Listed
Molded connec tors
Clean break-away act ion
Increase life of call cords, pillow speakers and room stat ions

Architects' And Engineers' SpecificationsArchitects' And Engineers' Specifications

The strain relief c able(s) shall be Alpha Communications® / TekTone model SF401EX or
approved equal.

The SF401EX shall be plugged into an Alpha Communications® / TekTone c all cord or
pillow speaker and then into a room st ation t o provide break-away action when st ressed.
The strain relief c able shall be approximately 6", and shall be terminated with one mail 'DIN'
connector and one female 'DIN' connec tor. The c onnec tor ends shall be molded t o provide
durability. A c ord-out shall report at the annunciator(s)/master station(s) if t he c able is
disconnected at either end.

The SF401EX shall be UL 1069 listed.