Alpha SF117-4A Specsheet

Product Specification Sheet APS831 - Rev. 11/2013

SF117/4A EMERGENCY PULL CORD SWITCHSF117/4A EMERGENCY PULL CORD SWITCH

387 CANAL STREET • NEW YORK • NY • 10013-1615 • Phone: [phone] • Fax: [phone] CANAL STREET • NEW YORK • NY • 10013-1615 • Phone: [phone] • Fax: [phone]

Web: www.canalalarm.comWeb: www.canalalarm.com

Copyright © 1998-2 017 Alpha Communication s® - All Righ ts Reserved.

Due to c ontinuo us product i mprovement, all col ors, sizes, materials, finishes and sp ecifications are subject to change witho ut not ice.

Shown in STANDBY mode Shown in ACTIVATED mode

NOTE: Our exclusive 'Red Indicator' turns RED when a call is
placed, without the need for costly LEDs or additional wiring
or additional power.

Architects' And Engineers' SpecificationsArchitects' And Engineers' Specifications

The Emergency Call switc h(es) shall be Alpha Communications®
model SF117/4A or approved equal with pull c ord operated switch,
mounted on a durable ABS plastic fac eplate marked
"EMERGENCY". Signaling for assistance shall only require a short
pull in any direction on the 6' nylon cord. Canceling the call
shall be possible only at the point of origin. Unit shall mount
on single-gang elect ric "gem" box or plaster ring. The

SF117/4A the shall have a RED 'Call-Plac ed' Flag Indicator

which gives positive visual assurance when a c all is
placed, without the need for any additional power or
stat ion wiring. Pull cords without a RED 'call placed' flag
indicator shall not be acceptable.

The Emergency Call switc h may be used with 'stand-alone' low­voltage emergency systems, or the AlphaEcall™ and/or QwikBUS™
series systems(s), or equivalent.

Contractor shall observe all local and national electrical and
building codes.

SF117/4A EMERGENCY PULL CORD SWITCHSF117/4A EMERGENCY PULL CORD SWITCH

The Alpha Communicat ions® SF117/4A Emergency Pull Switc h
features a rugged, long-life, positiveac ting switch mounted on a
durable ABS plastic fac eplate. Signaling an emergency requires just
a short pull on the 6' long nylon cord, in any direction. T he signal
cannot be c anc eled except at t he point of origin.

The SF117/4A provides four (4) circuits to operate 1- 4 signaling
devices, suc h as a remote annunciator lamp, and a c orridor dome
lamp, as well as signaling circuits to operate additional options
such as floor bell(s) and individual apartment elec tric door
openers, as required.

The SF117/4A features a rugged, long-life, positiveac ting switch
mounted on a flame retardant type ABS plastic faceplate marked
"EMERGENCY" in Black lett ering. In addition, the SF117/4A features
our 'Exclusive' RED 'Call-Placed' Flag Indicator which gives positive
visual assurance when a c all is placed, without t he need for any
additional power or station wiring.

SpecificationsSpecifications

Dimensions:

Height: 4.50" (114mm) (less cord)
Width: 2.75" (70mm)
Depth: 1.50" (38mm) (into wall)

Faceplate: White ABS plastic.

Switch:

SF117/4A - 4PDT (with Flag

Indicator) Switch rat ing: 125V, 2A

Connection: Pigtail wire leads

Mounting: Standard single-gang electrical box

Marking: "EMERGENCY" in Black Letters

Cord Length:

6 foot long (can be shortened in
the field), made of durable Nylon