
Description
5 Megapixel premium camera with numerous image pre-processing
functions
The Pike F-505B/C is equipped with a renowned Sony Super HAD CCD sensor and has an
excellent image quality. At full resolution, it runs up to 15 fps. Higher frame rates can be
reached by a smaller AOI, binning (b/w), or sub-sampling.
●
Sony ICX625
●
Two configurable inputs, four configurable outputs
●
RS-232 port (serial port, IIDC V1.31)
●
Trigger
❍
Programmable, trigger level control, single trigger, bulk trigger, programmable trigger
delay
●
Options
❍
1394b connectors: daisy chain copper or copper and GOF
❍
Various IR cut/pass filters
❍
F/M39-Mount
❍
Hirose power: out
❍
Angled head
❍
White medical housing
http://www.alliedvisiontec.com/emea/products/cameras/firewire/pike/f-505bc.html 1

Specifications
Pike F-505
Interface IEEE 1394b - 800 Mb/s, 2 ports, daisy chain, fiber optic (GOF) optional
Resolution 2452 x 2054
Sensor Sony ICX625
Sensor type CCD Progressive
Sensor size Type 2/3
Cell size 3.45 µm
Lens mount C
Max frame rate at full resolution 15 fps
A/D 14 bit
On-board FIFO 64 MB
Output
Bit depth 8-14 bit
Mono modes Mono8, Mono12, Mono16
Color modes YUV YUV411, YUV422
Color modes RGB RGB8
Raw modes Raw8, Raw12, Raw16
General purpose inputs/outputs (GPIOs)
Opto-coupled I/Os 2 inputs, 4 outputs
RS-232 1
Operating conditions/Dimensions
Power requirements (DC) 8 V - 36 V
Power consumption (12 V) 4 W
Mass 250 g
Body Dimensions
(L x W x H in mm)
Regulations CE, FCC Class B, RoHS
96.8 x 44 x 44 mm including connectors, w/o tripod and lens
Pike technical drawing (C-Mount)
http://www.alliedvisiontec.com/emea/products/cameras/firewire/pike/f-505bc.html 2

Smart features
●
Programmable LUT, white balance, hue, saturation
●
Debayering
●
Gain
❍
Auto/manual
❍
Manual gain control: 0 - 24 dB
●
Exposure
❍
Auto/manual
❍
Exposure time: 27 µs - 67 s
●
Color correction
●
Shading correction
●
High SNR mode (up to 24 dB better signal-to-noise ratio)
●
Smear reduction
●
Sub-sampling, 2x – 8x binning (b/w)
●
Separate AOI for auto features
●
Sequence mode (changes the image settings on the fly)
●
Image mirror
●
Deferred image transport
●
SIS (secure image signature, time stamp for trigger, frame count etc.)
●
Storable user settings
http://www.alliedvisiontec.com/emea/products/cameras/firewire/pike/f-505bc.html 3

Applications
The Pike F-505B/C is perfectly suited for very demanding applications. The brillant image
quality can be enhanced by its image pre-processing functions. Due to the modular design,
customization is easy and cost-effective. This camera fits especially for:
●
Science and research
●
Microscopy
●
Healthcare and medical applications (white housing available)
●
Multimedia, entertainment and sports
●
Very demanding OEM camera applications
●
ITS (Intelligent traffic solutions)
●
Long cables - 400 meters and more without additional repeaters (fiber version)
http://www.alliedvisiontec.com/emea/products/cameras/firewire/pike/f-505bc.html 4