ALLIED Vision Technologies Pike F-1100 User Manual

Description
11 Megapixel premium camera – 35 mm CCD sensor Truesense KAI-11002
The Pike F-1100B/C is an 11 Megapixel 1394b camera with excellent image quality. It can be operated both with single tap and dual tap mode. At full resolution, it runs up to 4.9 fps (dual tap). Higher frame rates can be reached by a smaller AOI, binning (b/w), or sub-sampling.
Truesense KAI-11002
Standard: Class 2 sensor, optional: Class 0/1 sensor
Trigger
Programmable, trigger level control, single trigger, bulk trigger, programmable trigger delay
Options
1394b connectors: daisy chain copper or copper and GOF
Various IR cut/pass filters
M42/M58-Mount
Hirose power: out
Angled head
White medical housing
http://www.alliedvisiontec.com/emea/products/cameras/firewire/pike/f-1100bc.html 1
Specifications
Pike F-1100
Interface IEEE 1394b - 800 Mb/s, 2 ports, daisy chain, fiber optic (GOF) optional Resolution 4008 x 2672 Sensor Truesense KAI-11002 Sensor type CCD Progressive Sensor size Type 35 mm Cell size 9 µm Lens mount F Max frame rate at full resolution 5 fps A/D 14 bit On-board FIFO 256 MB
Output Bit depth 8-14 bit Mono modes Mono8, Mono12, Mono16 Color modes YUV YUV411, YUV422 Color modes RGB RGB8 Raw modes Raw8, Raw12, Raw16
General purpose inputs/outputs (GPIOs) Opto-coupled I/Os 2 inputs, 4 outputs RS-232 1
Operating conditions/Dimensions Power requirements (DC) 8 V - 36 V Power consumption (12 V) 4 W Mass 380 g Body Dimensions
(L x W x H in mm) Regulations CE, FCC Class B, RoHS
142.8 x 59 x 59 mm including connectors, w/o tripod and lens
Pike technical drawing (F-Mount)
http://www.alliedvisiontec.com/emea/products/cameras/firewire/pike/f-1100bc.html 2
Smart features
Programmable LUT, white balance, hue, saturation
Debayering
Gain
Auto/manual
Manual gain control: 0 - 24 dB
Exposure
Auto/manual
Exposure time: 129 µs - 67 s
Color correction
Shading correction
Defect pixel correction
High SNR mode (up to 24 dB better signal-to-noise ratio)
Sub-sampling, 2x – 8x binning (b/w)
Separate AOI for auto features
Sequence mode (changes the image settings on the fly)
Image mirror
Deferred image transport
SIS (secure image signature, time stamp for trigger, frame count etc.)
Storable user settings
http://www.alliedvisiontec.com/emea/products/cameras/firewire/pike/f-1100bc.html 3
Applications
The Pike F-1100B/C is ideal for high-precision applications. Its excellent image quality can be enhanced by numerous image pre-processing functions. It is also available with M42-Mount or with M58-Mount.
This camera is well-suited for:
Science and research
Metrology
Document scanning (replaces DSLR cameras - no mechanical shutter, long life time)
Healthcare and medical applications
Industrial inspection at high resolutions
Aerial imaging
Very demanding OEM camera applications
ITS (Intelligent traffic solutions)
Long cables - 400 meters and more without additional repeaters (fiber version)
http://www.alliedvisiontec.com/emea/products/cameras/firewire/pike/f-1100bc.html 4
Loading...