ALLIED Vision Technologies Pike F-100 User Manual

Description

Premium 1 Megapixel FireWire camera with very high frame rates

The Pike F-100B/C is equipped with a Truesense KAI-1020 CCD sensor. At full resolution, it
runs at 60 fps (Mono8/Raw8). Higher frame rates can be reached by a smaller AOI, binning
(b/w), or sub-sampling. The camera includes extraordinary image pre-processing functions
like the High SNR mode (up to 24 dB better signal-to-noise ratio).

●

Truesense KAI-1020

●

Trigger

❍

Programmable, trigger level control, single trigger, bulk trigger, programmable trigger
delay

●

Options

❍

1394b connectors: daisy chain copper or copper and GOF

❍

Various IR cut/pass filters

❍

F/M39-Mount

❍

Hirose power: out

❍

Angled head

❍

White medical housing

http://www.alliedvisiontec.com/emea/products/cameras/firewire/pike/f-100bc.html 1

Specifications

Pike F-100

Interface IEEE 1394b - 800 Mb/s, 2 ports, daisy chain, fiber optic (GOF) optional
Resolution 1000 x 1000
Sensor Truesense KAI-1020
Sensor type CCD Progressive
Sensor size Type 2/3
Cell size 7.4 µm
Lens mount C
Max frame rate at full resolution 60 fps
A/D 14 bit
On-board FIFO 64 MB

Output
Bit depth 8-14 bit
Mono modes Mono8, Mono12, Mono16
Color modes YUV YUV411, YUV422
Color modes RGB RGB8
Raw modes Raw8, Raw12, Raw16

General purpose inputs/outputs (GPIOs)
Opto-coupled I/Os 2 inputs, 4 outputs
RS-232 1

Operating conditions/Dimensions
Power requirements (DC) 8 V - 36 V
Power consumption (12 V) 4 W
Mass 250 g
Body Dimensions

(L x W x H in mm)
Regulations CE, FCC Class B, RoHS

96.8 x 44 x 44 mm including connectors, w/o tripod and lens

Pike technical drawing (C-Mount)

http://www.alliedvisiontec.com/emea/products/cameras/firewire/pike/f-100bc.html 2