Allied Telesis FastSwitch8 User Manual

Errata for
FastSwitch8 Installation Guide

Verifying FastSwitch8 Package Contents

A 10Base-T Ethernet Cable is not
stated on page 7.

Rear Panel

The LanEdge FastSwitch8 rear panel shown in Figure 1 (on page 1)
and Figure 3 (on page 3) is incorrect. The correct panel is shown
below.

The rear panel of the switch consists of a Reset button, 8 speed/
duplex DIP switches, 8 (10/100 Mbps MDI-X) (Media Dependent
Interface with Crossover) ports, an Uplink switch for Port 8 (MDI),
and a power adapter connector, as shown below.

(PN 613-10784-00 Rev A)

provided in the product package as

12345678

RESET

Reset

DIP
Settings

Copyright 1999 Allied Telesyn International, Corp. 960 Stewart Drive Suite B, Sunnyvale CA 94086 USA
All rights reserved. No part of this publication may be reproduced without prior written permission from Allied Telesyn International, Corp.

PN 613-10806-00 Rev C Allied Telesyn International, Corp.

10/100M Ports (MDI-X)

Uplink /
Normal

DC Power
Adapter