Allied Telesis AT-TQm5403 Product Information

Wireless | Product Information
TQm5403
3-radio 802.11ac Wave 2 Wireless Access Point
The Allied Telesis Enterprise-class TQm5403 Wireless Access Point features IEEE 802.11ac
Wave 2 technology with two spatial streams to deliver a raw capacity of 2.133 Gigabits.
Overview
The Allied Telesis TQm5403 is a three-
radio wireless LAN access point that supports IEEE802.11ac Wave 2, and is ideal for small to medium enterprise networks, providing a high-value and easily deployed wireless solution.
The TQm5403 has a single 2.4GHz
radio and dual 5GHz IEEE 802.11ac radios, and supports Multi-User Multiple Input and Multiple Output (MU-MIMO), allowing multiple clients to send and receive data at the same time, substantially increasing throughput. Combined with a comprehensive feature-set, the APs provide superior wireless connectivity.
The TQm5403 can operate in
standalone mode, using its intuitive web-based user interface. For medium scale installations it can be managed by Allied Telesis Autonomous Wave Control (AWC). With AWC, the wireless network is regularly analyzed, and APs are dynamically updated to reduce interference, minimize coverage gaps, and optimize performance—all with no user intervention. The Allied Telesis network management platform, Vista Manager EX, has an AWC wireless management plugin that supports up to 100 APs.
Flexible deployment options enable easy installation, with the TQm5403 able to be used on the desktop or mounted on a wall or ceiling. Power may be supplied by Power over Ethernet, for the simplicity of having the Ethernet network connect and power the APs, or by an optional AC power adapter.
ۼ ۼ
Key Features
IEEE 802.11ac Wave 2
ۼۼ IEEE 802.11ac Wave 2 wireless connectivity
delivers Gigabit performance and throughput. In crowded wireless environments, efficient bandwidth distribution is important; IEEE 802.11ac Wave 2 achieves efficiency and robustness, using Multi-user MIMO technology.
ۼۼ Unlike traditional Single-user MIMO networks
where devices are served sequentially, Multi-user MIMO simultaneously communicates to multiple clients at once, reducing contention and improving capacity and throughput by up to three times.
ۼۼ Multi-user MIMO uses beamforming, where the
AP focuses wireless signal towards connected devices, rather than simply radiating the signal evenly. This improves range and speed for each user, and reduces inter ference for the best possible connection.
Tri-radio, with Band Steering
ۼۼ The TQm5403 contains three IEEE 802.11 2ss
radios to enable concurrent Wi-Fi communications: one at 2.4GHz band, and two at 5GHz band. This alleviates network congestion and isolates any legacy client devices affecting performance.
ۼۼ Band steering prompts newly connecting devices
to use a band with little current congestion to distribute wireless traffic, provide maximum throughput, and the best user experience.
Virtual APs with Multiple SSIDs
ۼۼ The TQm5403 supports Virtual AP (VAP)
functionality, with the assignment of different SSIDs and security policies for each VAP on the physical device.
ۼۼ VAPs can be mapped to VLANs for logical network
separation and improved throughput. Enable communication by application, function or users.
IEEE 802.11e Wireless Multimedia (WMM)
ۼۼ Quality of Ser vice (QoS) on the wireless network
optimizes the performance of voice, video, and data applications, as each has different latency, bandwidth and performance requirements. QoS traffic prioritization ensues the timely delivery of these services.
IEEE 802.11i (security)
ۼۼ This feature set facilitates strong encryption,
authentication and key management strategies, guaranteeing data and system security. In addition to Counter Mode with Cipher Block Chaining Message Authentication Code Protocol (CCMP), IEEE 802.1X key distribution via R ADIUS controls access to the network.
Link Aggregation
ۼۼ The TQm5403 features two 10/100/1000T
Ethernet ports. These can be combined into a single virtual connection using static link aggregation, to double the bandwidth from the A P to the wired network.
Captive Portal
ۼۼ Manage user access to the Wi-Fi network with
captive por tal. New users are taken to a login page ensuring they must authenticate before gaining access to the wireless network, and any online resources and applications.
Dynamic VLANs
ۼۼ Dynamic VLANs simplify management by enabling
users to be separated on different VL ANs according to rules defined in a centralized user database. When a user connects, their credentials are checked and the VLAN assigned automatically to the AP. An external RADIUS server is supported and a secondary RADIU S server can also be specified for redundancy.
Graphical User Interface
ۼۼ The web-based user interface is user friendly and
intuitive, minimizing training needs, and allowing easy management and monitoring of a single AP. AWC enables management of multiple APs, and automatic wireless network optimization.
Airtime Fairness
ۼۼ Airtime Fairness equally assigns airtime to each
connected client, to ensure fair and predictable sharing of bandwidth. This feature prevents any client from monopolizing the bandwidth when transferring a large amount of data, and ensures consistent performance for all users.
Continued on Page 2
alliedtelesis.com
617-000653 RevF
NETWORK SMARTER
TQm5403 | 3-radio 802.11ac Wave 2 Wireless Access Point
ۼ ۼ
Key Features
Fast Roaming
ۼۼ Fast Roaming with 802.11k, 802.11v, and
802.11r optimizes the process of discovering and selecting the best available AP in a Wi-Fi network, and establishes rapid connectivity for users to seamlessly move between APs.
ۼۼ Users will experience a consistent wireless
connection as the APs exchange security keys, so the client device does not need to re-authenticate on the RADIUS server as they roam.
Specifications
Physical Specifications
PRODUCT WIDTH X DEPTH X HEIGHT WEIGHT
TQm5403
Power Characteristics
PRODUCT POWER SUPPLY
TQm5403
215 x 215 x 48 mm
(8.46 x 8.46 x 1.89 in)
100-240VAC 10W 20W 67 BTU /h
POE 10W 19W 64 BTU /h
700 g (24.69 oz) 2 (1 PoE-in port)
POWER CONSUMPTION
AVER AGE MAXIMUM
10/10 0/1000 T (RJ-45)
COPPER PORTS
MA X HE AT DISSIPATI ON
ۼۼ EN 61000-4-2 ۼۼ EN 61000-4-3 ۼۼ EN 61000-4-4 ۼۼ EN 61000-4-5 ۼۼ EN 61000-4-6 ۼۼ EN 61000-4-8 ۼۼ EN 61000-4-11 ۼۼ FCC 47 CFR Part 15, Subpart B ۼۼ VCCI, class B
Radio equipment
ۼۼ AS /NZS 4268 ۼۼ EN 300 328 ۼۼ EN 301 893 ۼۼ FCC 47 CFR Part 15, Subpart C ۼۼ FCC 47 CFR Part 15, Subpart E
2
ۼۼ FCC part 2
Environmental Specifications
ۼۼ Operating temperature range:
PoE: 0°C to 50°C (32°F to 122°F) AC adapter: 0°C to 45°C (32°F to 113°F)
ۼۼ Storage temperature range:
-25°C to 70°C (-13°F to 158°F)
ۼۼ Operating relative humidity range:
90% non-condensing
ۼۼ Storage relative humidity range:
95% non-condensing
Wireless
ۼۼ Multi-channel operation ۼۼ Airtime fairness ۼۼ Automatic channel selection ۼۼ Automatic control of transmission power ۼۼ Band Steering ۼۼ Fast roaming ۼۼ RF load balancing ۼۼ Wireless Distribution System ( WDS) ۼۼ Wi-Fi Multimedia (WMM) for traffic prioritization
Operational Modes
ۼۼ Centrally managed in multi-channel mode by Vista
Manager EX (up to 100 APs)
1
ۼۼ Standalone
Management
ۼۼ Graphical User Interface (HTTP/HTTPS) ۼۼ Simple Network Management Protocol
(SNMPv1, v2c)
ۼۼ Firmware upgrade ۼۼ Backup/restore settings ۼۼ Syslog notification ۼۼ DHCP client ۼۼ NTP client
Security
ۼۼ Authentication and accounting
IEEE 802.1X authentication and accounting IEEE 802.1X RADIUS suppor t Shared Key Authentication WPA (Enterprise, Personal) WPA2 (Enterprise, Personal) Captive Portal (External RADIUS, Click-Through)
ۼۼ Encryption
WEP: 64/128 bit (IEEE 802.11a/b/g only)
WPA/WPA2: CCMP (AES), TKIP
ۼۼ MAC address filtering (Up to 1024 MAC address) ۼۼ SSID hiding/ignoring ۼۼ Client isolation ۼۼ Neighbor AP detection
Compliance
Certificates
ۼۼ FCC ۼۼ CE ۼۼ RCM ۼۼ Wi-Fi certified (ID:WFA75927) ۼۼ IMDA (For Singapore) ۼۼ KC (For South Korea) ۼۼ MIC (For Vietnam) ۼۼ NBTC (For Thailand) ۼۼ BSMI/NCC (For Taiwan) ۼۼ OFCA (For Hong Kong) ۼۼ SIRIM (For Malaysia) ۼۼ WPC (For India) ۼۼ IC (For Canada)
Safety
ۼۼ EN 60950-1 ۼۼ EN 6 236 8-1 ۼۼ UL 60950-1 ۼۼ UL 6 2368 -1
ElectroMagnetic Compatibility
ۼۼ AS/NZS 2772.2 ۼۼ EN 301 489-1 ۼۼ EN 301 489-17 ۼۼ EN 55024 ۼۼ EN 55032, Class B ۼۼ EN 61000-3-2, Class A ۼۼ EN 61000-3-3
Embedded Antennas
Omni-directional
ۼۼ Frequency band: 2.4 GHz ۼۼ Max. peak gain: 3.95dBi
Omni-directional
ۼۼ Frequency band: 5GHz (5.2-5.3GHz) ۼۼ Max. peak gain: 4.20dBi
Omni-directional
ۼۼ Frequency band: 5GHz (5.6-5.8GHz) ۼۼ Max. peak gain: 4.83dBi
Radio Characteristics
Supported frequencies:
ۼۼ 2.400 ~ 2.4835 GHz ۼۼ 5.150 ~ 5.250 GHz ۼۼ 5.250 ~ 5.350 GHz ۼۼ 5.470 ~ 5.725 GHz ۼۼ 5.725 ~ 5.850 GHz
Modulation Technique
ۼۼ 802.11a/g/n/ac: OFDM ۼۼ 802.11b: DSSS, CCK, DQPSK, DBPSK ۼۼ 802.11ac: BPSK, QPSK, 16QAM, 64QAM,
256QAM
ۼۼ 802.11a/g/n: BPSK, QPSK, 16QAM, 64QAM,
256QAM
Data Rate
ۼۼ 8 02.11a /g :
54/48/36/24/18/12/9/6Mbps
ۼۼ 802.11b: 11/5.5/2/1Mbps
1
Suppor ts up to 20 0 clients ma ximum per single TQm54 03
2
Suppor ted frequencies: 5.150 ~ 5.250 GHz
5.725 ~ 5.85 0 GHz
3
Using 256 Quadrature Amplitude Modulation
alliedtelesis.com
617-000653 RevE
NETWORK SMARTER
TQm5403 | 3-radio 802.11ac Wave 2 Wireless Access Points
ۼۼ 802.11n: 6.5 - 400Mbps ۼۼ 802.11n: 6.5 - 300Mbps ( MCS 0 - 15) ۼۼ 802.11ac: 6.5 – 866.7Mbps (MCS 0 - 9,
NSS 1 - 2)
Media Access
ۼۼ CSMA /CA + Ack with RTS/CTS
Diversity
ۼۼ Spatial diversity
3
(MCS 0 - 15)
Standards
Ethernet
IEEE 802.1AX-2008 Link Aggregation (static) IEEE 802.3 10BASE-T IEEE 802.3u 100 BAS E-TX IEEE 802.3ab 1000BASE-T IEEE 802.3x Flow Control IEEE 802.3at Power over Ethernet+ IEEE 802.1Q VLAN Tagging
Wireless
IEEE 802.11 a/b/g/n /ac (Wave 2) 2x2:2ss MU-MIMO IEEE 802.11k Radio Resource Measurement of Wireless L ANs IEEE 802.11v Basic Service Set Transition Management Frames
Ordering Information
AT-TQm5403-xx
SMB 802.11ac Wave 2 Wireless Access Point with 3 radios and embedded antenna
Where xx = [none] Regulatory Domain: Worldwide (except United States)
01 Regulatory Domain: United States Reserved
Related Products
AT-MWS0091
AC adapter
IEEE 802.11r Fast Basic Service Set Transition IEEE 802.11e WMM for Quality of S ervice IEEE 802.11i WPA/WPA 2/802.1x for Securit y
Wireless Management Licenses
Wireless management of the TQm5403 is available from the Vista Manager EX network management platform, and from Vista Manager mini running on our SwitchBlade x908 GEN2, x950, x930, x530 Series switches or AR-Series firewalls and routers.
PLATFORM LICENSE NAME DESCRIPTION
Vista Manager E X AT-FL-VIS TA-B ASE-1/5YR
Vista Manager E X
SwitchBlade x908 GEN2
SwitchBlade x908 GEN2
SwitchBlade x908 GEN2
SwitchBlade x908 GEN2
SwitchBlade x908 GEN2
SwitchBlade x908 GEN2
x950 Series
x950 Series
x950 Series
x950 Series
x930 Series
x930 Series
x930 Series
x530 Series
AR40 50S UTM Firewall
AT-FL-VIS TA-AW C10 -1/5Y R
AT-FL-GEN2-AWC40-1/5YR
AT-FL-GEN2-AWC80-1/5YR
AT-FL-GEN2-AWC120-1/5YR
AT-FL-GEN2-AWC180-1/5YR
AT-FL-GEN2-AWC250-1/5YR
AT-FL-GEN2-AWC300-1/5YR
AT-FL-x950-AWC40-1/5YR
AT-FL-x950-AWC80-1/5YR
AT-FL-x950-AWC120-1/5YR
AT-FL-x950-AWC180-1/5YR
AT-FL-x930-AWC40-1/5YR
AT-FL-x930-AWC80-1/5YR
AT-FL-x930-AWC120-1/5YR
AT-FL-x530-AWC40-1/5YR
AT-FL-AR4-AWC20-1/5YR
5
5
5
5
5
5
5
5
Vista Manager EX network monitoring and management software license
4
Autonomous Wave Controller (AWC) license for Vista Manager
Autonomous Wave Controller (AWC) license for SBx 908 GEN2 (Up to 40 access points)
Autonomous Wave Controller (AWC) license for SBx 908 GEN2 (Up to 80 access points)
5
Autonomous Wave Controller (AWC) license for SBx 908 GEN2 (Up to 120 access points)
5
Autonomous Wave Controller (AWC) license for SBx 908 GEN2 (Up to 180 access points)
5
Autonomous Wave Controller (AWC) license for SBx908 GEN2 ( Up to 250 access points)
5
Autonomous Wave Controller (AWC) license for SBx908 GEN2 ( Up to 300 access points)
Autonomous Wave Controller (AWC) license for x950 (Up to 4 0 access points)
Autonomous Wave Controller (AWC) license for x950 (Up to 8 0 access points)
5
Autonomous Wave Controller (AWC) license for x950 (Up to 120 access points)
5
Autonomous Wave Controller (AWC) license for x950 (Up to 180 access points)
Autonomous Wave Controller (AWC) license for x930 (Up to 40 access points)
Autonomous Wave Controller (AWC) license for x930 (Up to 80 access points)
5
Autonomous Wave Controller (AWC) license for x930 (Up to 120 access points)
Autonomous Wave Controller (AWC) license for x530 (Up to 40 access points)
Autonomous Wave Controller (AWC) license for AR4050 S (Up to 20 access points)
4
The AWC license also requires the Vista Manager E X license to operate
5
5 APs can be managed for free. Additional APs can be managed by purchasing AWC licenses
NETWORK SMARTER
North America Headquarters | 19800 Nor th Creek Parkway | Suite 100 | Bothell | WA 98011 | USA | T: +1 800 424 4284 | F: +1 425 481 3895 Asia-Pacific Headquarters | 11 Tai Seng Link | Singapore | 53 4182 | T: +65 6383 3832 | F: +65 6383 3830 EMEA & CSA Operations | Incheonweg 7 | 1437 EK Rozenburg | The Netherlands | T: +31 20 7950020 | F: +31 20 7950021
alliedtelesis.com
© 2019 Allied Tele sis, Inc. All right s reserved. Infor mation in this docum ent is subject to chan ge without notice. A ll company names, l ogos, and product d esigns that are trad emarks or register ed trademarks are t he property of t heir respective ow ners.
617-000653 RevF
Loading...