Allied Telesis AT-9448Ts-XP User Manual

Datasheet | Switches
AT-9448Ts/XP
48 Port 10/100/1000T Managed Layer 3 Switch with 2 10GbE XFP Bays and a Stacking Module Expansion Bay with 48Gbps Stack Backplane
AT-9448Ts/XP-xx
Layer 3 stackable switch with 48 port 10/100/1000T plus 2 XFPs ba (unpopulated) and memory flash card slot
Product Ov
The AT-9448Ts/XP is a La (10/100/1000) switch with built-in 10GbE front­side XFP bays for 10Gbps backbone connectivity. It is the ideal 10GbE backbone gateway at the edge and aggregation tiers of the network. It comes in a 1RU form factor and provides rich QoS and IGMP capabilities for voice and video enabled networks.
The relative affordability of the AT-9448Ts/XP makes 10GbE backbones a reality for small to medium enterprises. It offers an extensive set of standards-based features to ensure ease of management and integration into existing networks.
erview
Built-in 10GbE Ba
The AT-9448Ts/XP switch is designed to meet the growing bandwidth needs that advanced applications and connectivity options are requiring of networks. It features two built-in bays for 10 Gigabit Ethernet connectivity to provide a well balanced uplink subscription ratio (2.4 to 1 using both bays). No additional module is required to house the XFP transceivers. It provides an extraordinary amount of bandwidth capacity making it an
estment f
v
ideal in 10 years of service or more from their switches.
or or
yer 3 Gigabit Ethernet
ys
ganizations that seek 7 to
Network QoS and IGMP for Video and Voice-over-IP
A rich offering of voice and video networking features is incorporated to ensure support for demanding multimedia networking applications in the enterprise. Con enhanced with QoS/Cos including eight priority queues for IEEE 802.1p/ToS/DiffServ traffic.
The high performance hardware platform makes latency a non-issue. The IGMP implementation on the AT-9448Ts/XP is capable of transmitting broadcast quality video throughout the enterprise network.
verged networking is
Network Security
To address the concern of network attacks in the form of Denial of Service (DoS), the AT-9448Ts/XP, using Layer 2-4 intelligence, can
yed to complement WAN firewalls and
be deplo PC anti-vir netw AT-9448Ts/XP comes pre-programmed to detect six well known DoS attacks and supports security features such as IEEE 802.1x (port-Based Network Access Control) and Radius/ TACACS+.
us protections to further for tify the
ork against malicious attacks. The
Long-term Relevance
The AT-9448Ts/XP is the ideal choice for organizations seeking a long-term switching
er 2
y
In addition to the extensiv
solution.
eature set this switch f
f and Layer 3 switching for the future flexibility and the capacity required to meet emer
Optional redundant po
needs. also available to further increase the service life of this switch.
eatures 10GbE suppor
e La
ging
er supplies are
w
Key Features
10 Gigabit Ethernet Support
Two integrated XFP bays for 10GbE
transceiver modules
Layer 3 Support
RIPv2
Static routing
ECMP
Performance
Throughput 144Mpps
Switch fabric 184Gbps
Stacking bandwidth 48Gbps
4K VLANs (static and dynamic)
256 static Layer 2 multicast groups
255 dynamic Layer 2 multicast groups
9K jumbo frame support
Layer 2-4 Intelligence
Packet inspection and classification at MAC, IP,
TCP/UDP layers
Set QoS, ACL, mirroring, and rate-limiting
using traffic classes
Security
DoS attack protection
Radius/TACACS+
Port security
SSH
SSL
IEEE 802.1x
Access Control Lists (ACLs)
Advanced Services
Rate Limiting (ingress and egress)
t
Eight QoS service levels
IEEE 802.1p for MAC-based QoS
DSCP for IP-based QoS
Resiliency
IEEE 802.1s Multiple STP
IEEE 802.3ad link aggregation
IEEE 802.1D Spanning-Tree
IEEE 802.1w Rapid STP
Temperature threshold alert
Management
Telnet
Web GUI
CLI
Dedicated management port
Compact flash slot
Allied Telesis www.alliedtelesis.com
AT-9448Ts/XP | 48 Port 10/100/1000T Managed Layer 3 Switch
H
ardware Specifications
Physical Characteristics
Dimensions (H x W x D) 4.4cm x 43.8cm x 30.4cm
Weight 5.09Kg
System Capacity
64 RAM 16MB flash memory 200MHz PowerPC CPU 4096 VLANs 16000 MAC addresses
Performance
Wirespeed switching on all Ethernet ports 14,880pps for 10Mbps Ethernet 148,800pps for 100Mbps Ethernet 1,488,000pps for 1000Mbps Ethernet
Ethernet throughput 136.896Mpps Switch fabric 184Gbps
Stacking with AT-StackXG stacking module up to eight switches Two 12Gbps full-duplex stacking port per module Resilient bidirectional ring architecture
Power Characteristics
Voltage: 100-240V AC Current: 4.0/2.0A Frequency: 50-60Hz Max power consumption: 128 watts
Environmental Specifications
Operating temperature: 0ºC to 40ºC
Storage temperature: -25ºC to 70ºC
Operating humidity: Storage humidity: 5% to 90% non-condensing Max operating altitude: 3,048m (10,000 ft)
Recommended ventilation on all sides:
MTBF 250,000 hrs.
(1.75” x 17.3” x 12”)
(11.2lbs.)
(32ºF to 104ºF)
(-13ºF to 158ºF) 5% to 90% non-condensing
10cm (4”)
E
lectrical/Mechanical Approvals
Safety UL 60950-1, CSA C22.2 No. 60950-1-03, EN60950-1, EN60825-2 (TUV) EMI FCC Part 15 Class A, EN55022 Class A, EN55024 Immunity, VCCI Class A, C-TICK, EN61000-3-2, EN61000-3-3, AS/NZS 3548 (Australia/New Zealand) Immunity EN55024
Country of Origin
Singapore
Software Specifications
Layer 3 Support
RIPv1 RIPv2 ECMP Static IPv4 routing (1024 routes)
Interface Standards
IEEE 802.3 10T and 10FL IEEE 802.3u 100TX and 100FX IEEE 802.3z 1000SX IEEE 802.3ab 1000T IEEE 802.3ae 10000X
General Standards
IEEE 802.1d Bridging IEEE 802.3ac VLAN tag frame extension IEEE 802.3x BackPressure/ flow control Head of line blocking Eight egress queues per port
Redundancy
Static and dynamic port trunking (with six trunk groups and up to eight ports per tr IEEE 802.3ad LACP link aggregation IEEE 802.1D Spanning-Tree Protocol
802.1w
IEEE IEEE 802.1s Multiple Spanning-Tree Router Redundancy Protocol (RRP) snooping Dual software images, dual configuration files
Traffic Management and Quality of Services (QoS)
3 and 4 criteria
er 2,
y
La Flo DSCP replacement IEEE Type of Service replacement Type of Service to IEEE 802.1Q priority replacement IEEE 802.1Q priority to Type of Service replacement Maximum bandwidth control Burst size control Ingress rate limiting Head of Line blocking prevention Support for ingress and egress ports Eight e IEEE 802.1p Class of Service with Strict and Weighted Round Robin Scheduling
, traffic classes and policies
w groups
802.1Q priority replacement
gress queues per por
unk)
Rapid Spanning-T
t
ree
M
ulticast
RFC 1112 IGMP snooping (v1) RFC 2236 IGMP snooping (v2) RFC 3376 IGMP snooping (v3) RFC 2710 Multicast Listener Discovery
RFC 3810 Multicast Listener Discovery
Management and Monitoring
RFC 1157 SNMPv1 RFC 1901 SNMPv2 RFC 3411 SNMPv3 RFC 1213 MIB-II RFC 1215 TRAP MIB RFC 1493 Bridge MIB RFC 2863 Interfaces group MIB RFC 1643 Ethernet-like MIB RFC 1757 RMON 4 groups: Stats,
RFC 2674 IEEE 802.1Q MIB RFC 1866 HTML RFC 2068 HTTP RFC 2616 HTTPS RFC 854 Telnet server RFC 1350 TFTP client AlliedTelesis Private MIB
IP address allocation: RFC 951 / RFC 1542 BOOTP client RFC 2131 DHCP client manual RFC 2030 SNTP, Simple Network
Syslog client Two event logs: 4,000 event capacity in temporary memory 2,000 event capacity in permanent memory
ement
Manag
Single IP address for management Out of band management (serial port) In-band management (o web browser or SNMP
Management Interfaces
Menus Command line Web browser SNMP v1/ v2/ v3
(MLD) snooping (v1)
(MLD) snooping (v2)
History, Alarms and Events
Time Protocol
Access Methods
ver the netw
ork) using T
elnet,
Allied
elesis
T
www.alliedtelesis.com
Loading...
+ 1 hidden pages