Allen & Heath IP-6 Data Sheet

Allen & Heath Limited
Kernick Industrial Estate
Penryn, Cornwall,
TR10 9LU, UK

www.allen-heath.com

ENGINEERED IN THE UK BY ALLEN & HEATH LIMITED MADE IN CHINA

Serial No:

Reset
Network
Settings

Network

PoE

Ext DC In

This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
CAN ICES-3 (B)/NMB-3 (B)

Lnk

/Act

Err

Overview

IP6 Te c h n i c a l D a t a s h e e t

• 6 Push n Turn Rotary encoders

• 6 x Layers

• PoE or external 12V PSU (supplied)

• Programmed via dLive Surface or

Director software

• Interface with dLive via TCP/IP

• Network with other controllers,

computers and third party devices

• Optional mic stand bracket available

(AB8999)

IP6 Technical Datasheet.docx Issue 2018 1 Allen & Heath Ltd

A&E Specifications

227

213

12.20

28.4

54.9

194.40

154

150

132

The remote controller shall be compact and portable
with 6 rotary encoders, 6 LCD displays, 19 backlit
softkeys and a dimmable pre-set control for all
displays.

The rotary encoders shall be dual function with the
second function being accessed via a push and turn
action. There shall be 6 layers of control, accessed
via softkeys, allowing control of 36 individual
channels.

There shall be a fast Ethernet connection via a
locking Neutrik EtherCon connector and a 12V DC
inlet connector on the rear of the unit.

Connection of the controller shall be either direct to
the Mixrack/Surface via standard Cat5 data
infrastructure. Alternatively, it shall be capable of
multiple parallel connections using an Ethernet
switch.

Configuration and programming of the controller
shall be via an embedded HTTP browser, the
console touchscreen or remote software installed on
a PC or MAC.

The controller shall be powered using a supplied
12V 2.5A power supply or by the Cat5 control cable
via a PoE enabled device. The controller shall be
compatible with both PoE standards 802.3af (15.4W
at source) and 802.3at (30W at source). The
maximum power consumption of the controller shall
be 5W.

The remote controller shall be used free standing or
mounted to stands, pipe or brackets using the 3/8”
threaded insert located on the underside of the unit.
Alternatively, there shall be provision made to fix the
unit permanently into furniture via six captive screws
also located on the underside of the unit.

Recommended operating temperature for the
controller shall be 0 to 35 degrees Celsius.

The controller shall weigh no more than 1.5kg
(3.3lbs).

The controller shall be the Allen & Heath IP6

Dimensions

IP6 Technical Datasheet.docx Issue 2018 2 Allen & Heath Ltd