Description
mension
ASSEMBLY INSTRUCTIONS
: CHAIR CUSHION SEAT
CHAIR CUSHION SEAT
Di
: 18"Wx22"Dx36"3/4H
Cube Size : 39” x18.8”x10.6” NW: 28.6 LBS
- 1 -
GW: 34.1 LBS
BEFORE ASSEM
BLY
PART
LIST
NO Description
Qty Sketch
NO
Description
Qty Sketch
Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. Please take
the time to read and follow the assembly instructions carefully.
Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment. Please separate,
identify, and count all parts and metal hardware. Compare with part list to be sure all parts are present.
If hardware is missing or you have difficulty assembling this product, please call for us.
IMPORTANT NOTE:
- Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
- Remove all wrapping material, including staples & packing straps before you start to assemble.
- DO NOT tighten all screws and bolts until completely assembled.
- Keep all hardware parts out of reach of children.
ASSEMBLY TOOLS REQUIRED
NOT INCLUDED
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have the following
parts:
A
Chair back 1
B
Seat Frame 1
C
Front Leg 2
CHAIR CUSHION SEAT
- 2 -
HARDWARE LIST
NO Description
Qty Sketch
NO
Description
Qty Sketch
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have all of the
following hardware:
1
3
5
Long bolt
(M6x80mm)
Short bolt
(M6x40mm)
Flat Washer
(Ф6.5x19)
4
2
10
Medium bolt
2
4
6
(M6x60mm)
Lock Washer
(Ф6.5x9)
Allen Key
(4mm)
4
10
1
STEP 1
Attach frame (B) to the back (A) by using bolts (3) and (1) and washers (4) and (5). Tighten with Allen Key (6).
Note: DO NOT tighten any of the bolts, until the chair is assembled, then put on a flat level surface to make sure
the chair is level and then tighten the bolts.
CHAIR CUSHION SEAT
X2
- 3 -
STEP 2
Attach front legs (C) to the seat frame. Use bolts (2), washers (4) and (5) .Tighten with Allen Key (6).
.
CHAIR CUSHION SEAT
- 4 -
Loading...