Alcatel One Touch X500 Owner Manual

User Manual

Table of Contents

1. Safety and Use ....................................................................... 2

2. Installation Guide .................................................................. 3

3. Main Interface Overview ....................................................... 4

4. Connect to Internet ............................................................... 5

5. Statistics ................................................................................ 6

6. Communication ..................................................................... 7

7. Settings ................................................................................ 10

8. Browser ............................................................................... 12

9. Warranty ............................................................................. 12

10. FAQs .................................................................................. 14

11.Certification ........................................................................ 15

1. Safety and Use

We recommend that you read this chapter carefully before using your modem. The

manufacturer disclaims any liability for damage, which may result as a consequence

of improper use of the modem or of use contrary to the instructions contained

herein.

Traffic Safety

When driving, do not use the modem:

 When switched on, the modem emits electromagnetic waves that can interfere

with the vehicle’s electronic systems such as ABS anti-lock brakes or airbags. To

ensure that there is no problem, please do not place the modem on top of the

dashboard or within an airbag deployment area.

 Check with your car dealer or the car manufacturer to make sure that the

dashboard is adequately shielded from modem RF energy.

Conditions of Use

1. Switch the modem off before boarding an aircraft.

2. Switch the modem off when you are in health care facilities, except in

designated areas. As with many other types of equipment now in regular use,

mobile Tele-modems can interfere with other electrical or electronic devices, or

equipment-using radio frequencies.

3. Switch the modem off when you are near gas or flammable liquids. Strictly obey

all signs and instructions posted in a fuel depot, petrol station, chemical plant,

or in any potentially explosive atmosphere.

4. When the modem is switched on, it should be kept at least 15 cm from any

medical device such as a pacemaker, a hearing aid or insulin pump, etc.

5. Do not let children use the modem without supervision. The modem may

contain small parts that could become detached and create a choking hazard.

6. When replacing the cover, please note that the modem may contain substances

that could create an allergic reaction.

7. Always handle the modem with care and keep it in a clean and dust-free place.

8. Do not allow the modem to be exposed to adverse weather or environmental

conditions (moisture, humidity, rain, infiltration of liquids, dust, sea air, etc). The

manufacturer’s recommended operating temperature range is -10°C to +50°C.

9. Do not open, dismantle or attempt to repair the modem yourself.

10. Do not drop, throw or bend the modem.

11. Do not paint the modem.

Collection Point:

This symbol on the modem means that it must be taken to collection points at

the end of their life:

 Municipal waste disposal centers with specific bins for these items of equipment

Collection bins at points of sale.

 They will then be recycled, preventing substances being disposed of in the

environment, so that their components can be reused.

In European Union countries:

These collection points are accessible free of charge.

All products with this symbol must be brought to these collection points.

In non European Union jurisdictions:

Items of equipment with this symbol are not to be thrown into ordinary bins if your

jurisdiction or your region has suitable recycling and collection facilities; instead they

are to be taken to collection points for them to be recycled.

In the United States, please visit www.recyclewirelessphones.org for more

information on recycling wireless products.

Protection against theft

The modem is identified by an IMEI (modem serial number) shown on the packaging

label and in the modem’s dashboard. We recommend that you note the number the

first time you use the modem by opening the dashboard “Settings” > “Diagnostics” to

get it.

Disclaimer

There may be certain differences between the user manual description and the

modem’s operation, depending on the software release of the modem or specific

operator services.

2. Installation Guide

2.1 Installation Guide for Windows

Installation procedures may vary based on the operating system installed on your PC.

The following instructions are based on the Windows XP OS:

Turn on your PC and plug the modem into the USB interface slot to begin software

Interface Icons

Provided Services

installation. Windows should automatically detect the new device and will prompt

you to begin installation.

After following the prompts of installation setup, upon completion, a shortcut will be

placed on your desktop for quick future access.

Note:

1. If installation “auto-run” does not begin, you will need to locate the

“autoRun.exe)” file in the driver path, and Double-Click on AutoRun.exe to run

the installation manually.

2. A Micro-SD card is an optional accessory.

3. Please do not remove the USIM/SIM card or the Micro-SD card when the

modem is in use.

Upon successful installation of the USB modem program, the program will launch

automatically. You may also double-click the short cut icon on the desktop to launch

the program.

2.2 Installation Guide for Mac

This manual describes the operations of the connect application.

This application requires MAC OS X10.4.9 or 10.8

1. To install the modem connect application on MAC OS X. Please double-click the

file My Connection.pkg

2. Click Continue

3. Select the Partition to install the application and click “Continue Installation”

4. When the installation is finished, you need to restart your computer to use the

modem.

5. Clicking Application>My Connection to start the connect application. You may

reserve this application in the Dock to access it faster.

3. Main Interface Overview

Short Cut Icons

Following table are listed Short Cut Icons in PC Suite Interface.

Connection

Display Connect Interface. Communication

Display Phonebook and Text Message Interface

Statistics

Query the statistics of the transferred data.

Settings

Display the Settings Menu.

Browser

Open the Browser

Help

Open User Manual

Status information

Connection Statistics Icon

Description

Network Signal

Indicates the signal strength of the network

Network Status

Indicates the network status. This will display the operator

name which the modem can find the network. Or show the

modem haven’t ready.< No (U)SIM> or <NO Device>

Network Type

Display in the status bar, to show you which network you are

using (GPRS / EDGE/ UMTS or HSPA)

Roaming

Roaming Icon “ ”, when the network is under roaming

New Message

Display the SMS status including new SMS/SIM card memory is

full/Data Card memory is full

Network Connecting

Connecting Icon “ ” display in the status bar, when the

network is connected into internet network

LED Indicator

Desctiption

Flashing Green & Red multicolour circularly

Network Searching

Quickly Flashing Green & Red multicolour

circularly

Out of order

Green Light Slow Flashing

Registering into 3G network

Constant Green Light

Registered to 3G network

Red Light Slow Flashing

Registering into 2G network

Constant Red Light

Registered to 2G network

Following table are listed the Icons of status bar information

LED Indication

Following table are listed the LED Indicates for each status.

4. Connect to Internet

1. Connecting with the default logon profile

+ 11 hidden pages