Alcatel-Lucent ONE TOUCH X210 User Manual
User Manual
Table of Contents
Safety and Use...................................................................................................................... 2
Installation Guide................................................................................................................. 4
Main Interface Overview................................................................................................... 4
Entrance to Main Interface...............................................................................................5
Connect to Internet............................................................................................................. 6
SMS Services (Text Message)............................................................................................. 7
Contacts................................................................................................................................. 9
Settings.................................................................................................................................. 10
Warranty............................................................................................................................... 13
FAQs....................................................................................................................................... 14
Installation Guide for Mac............................................................................................... 15
1
Safety and Use
We recommend that you read this chapter carefully before using your
modem. The manufacturer disclaims any liability for damage, which
may result as a consequence of improper use of the modem or of use
contrary to the instructions contained herein.
Traffic Safety
When driving, do not use the modem:
When switched on, the modem emits electromagnetic waves that
can interfere with the vehicle’s electronic systems such as ABS
anti-lock brakes or airbags. To ensure that there is no problem,
please do not place the modem on top of the dashboard or within
an airbag deployment area.
Check with your car dealer or the car manufacturer to make sure
that the dashboard is adequately shielded from modem RF energy.
Conditions of Use
1. Switch the modem off before boarding an aircraft.
2. Switch the modem off when you are in health care facilities, except
in designated areas. As with many other types of equipment now in
regular use, mobile telemodems can interfere with other electrical
or electronic devices, or equipment-using radio frequencies.
3. Switch the modem off when you are near gas or flammable liquids.
Strictly obey all signs and instructions posted in a fuel depot, petrol
station, chemical plant, or in any potentially explosive atmosphere.
4. When the modem is switched on, it should be kept at least 15 cm
from any medical device such as a pacemaker, a hearing aid or
insulin pump, etc.
5. Do not let children use the modem without supervision. The modem
may contain small parts that could become detached and create
a choking hazard.
6. When replacing the cover, please note that the modem may
contain substances that could create an allergic reaction.
7. Always handle the modem with care and keep it in a clean and
dust-free place.
8. Do not open, dismantle or attempt to repair the modem yourself.
9. Do not drop, throw or bend the modem.
2
10. Do not paint the modem.
Collection Point:
This symbol on the modem means that it must be taken to
collection points at the end of their life:
Municipal waste disposal centers with specific bins for these items of
equipment
Collection bins at points of sale.
They will then be recycled, preventing substances being disposed
of in the environment, so that their components can be reused.
In European Union countries:
These collection points are accessible free of charge.
All products with this symbol must be brought to these collection points.
In non European Union jurisdictions:
Items of equipment with this symbol are not to be thrown into ordinary
bins if your jurisdiction or your region has suitable recycling and
collection facilities; instead they are to be taken to collection points for
them to be recycled.
In the United States, please visit www.recyclewirelessphones.org for
more information on recycling wireless products.
Protection against theft
The modem is identified by an IMEI (modem serial number) shown on
the packaging label and in the modem’s dashboard. We recommend
that you note the number the first time you use the modem by opening
the dashboard “Settings” > “Diagnostics” to get it.
Disclaimer
There may be certain differences between the user manual description
and the modem’s operation, depending on the software release of the
modem or specific operator services.
3
Installation Guide
Installation procedures may vary based on the operating system
installed on your PC. The following instructions are based on the
Windows XP OS:
Turn on your PC and plug the modem into the USB interface slot to
begin software installation. Windows should automatically detect the
new device and will prompt you to begin installation.
After following the prompts of installation setup, upon completion, a
shortcut will be placed on your desktop for quick future access.
Note:
1. If installation “auto-run” does not begin, you will need to locate the
“autoRun.exe)” file in the driver path, and Double-Click on
AutoRun.exe to run the installation manually.
2. A Micro-SD card is an optional accessory.
3. Please do not remove the USIM/SIM card and or the Micro-SD card
when the modem is in use.
Upon successful installation of the HSPA management program, the
program will launch automatically. You may also double-click the short
cut icon on the desktop to launch the program.
Main Interface Overview
Following table are listed Short Cut Icons in PC Suite Interface.
Interface Icons Provided Services
Home Home Page (Click on <Connect> icon from the
main window to connect/disconnect from the
Internet)
Contacts Display The Phones Book Interface
SMS Display The Text Message Interface
Browser Open the Browser
Settings Display the Settings manual
Following table are listed the Icons of status bar information
4
Connection Statistics Icon Description
Network Signal Indicates the signal strength of the network
Network Status Indicates the network status. This will display the
operator name which the modem can find the
network. Or show the modem haven’t ready.< No
(U)SIM> or <NO Device>
Network Type Display in the status bar, to show you which network
you are using (GPRS / EDGE/ UMTS or HSPA)
Roaming
New Message Display the SMS status including new SMS/SIM card
Network Connecting
Roaming Icon “ ”, when the network is under
roaming
memory is full/Data Card memory is full
Connecting Icon “ “display in the status bar, when
the network is connected into internet network
Following table are listed the LED Indicates for each status.
LED Indicator Desctiption
Flashing Green & Red multicolour
circularly
Quickly Flashing Green & Red multicolour
circularly
Green Light Slow Flashing Registering into HSPA or UMTS network
Constant Green Light Registered to HSPA or UMTS network
Network Searching
Out of order
Red Light Slow Flashing Registering into GPRS or EDGE network
Constant Red Light Registered to GPRS or EDGE network
Entrance to Main Interface
The application runs automatically and the main window will pop up
when the modem will be connected. You can also access and run the
application from the <Start> menu.
If the PIN code is enabled, please enter the correct PIN code in the
entry field, and click on <OK>. You may try only 3 times to enter the
correct PIN code; after three incorrect attempts, the USIM or SIM card
will be blocked.
5
A PUK dialog box will then be displayed asking you to enter the right
PUK code, PIN Code and Confirmed PIN. Click on <OK> if you fail to
input the correct PUK code after 10 attempts, you will need to contact
your service provider.
If the PUK and PIN code is correct, the application will be launched and
all features are enabled
Connect to Internet
1. Connecting with the default logon profile
If you want to connect to the Internet without setting any user-defined
or predefined profiles, press icon of “connect”. The default connection
profile will be used in accordance with your USIM/SIM card.
Connecting
• Click on <Connect> from the home page;
• Wait several seconds until the connection is established;
• Once you are connected, Icon of <Connect> will change into
<Disconnect>.
Disconnecting
Click on Icon of <Disconnect> from the home page to disconnect from
the Internet.
2. Connecting with a user-defined logon profile
Click on settle icon and select the <Connection Profile…> menu to
open the profile setting window.
Adding a new connection profile
• Click on <Settings> and select the connect Profile to add a new
connection
• If <ADD> is selected, the new connection profile windows will pop
up.
• Please enter the info of requested;
6
• Account (Connection Naming), Number, APN, User Name, password
and final choice which Auth Type you are using by manually;
• Click <OK>
• Please select you preferred network and click on <Activate> to
default your connection setting.
Note：Users may obtain Number, APN Code, User Name, Password an d
Auth type information from networks provider.
SMS Services (Text Message)
Click SMS icon from the main interface of the PC suite to access the SMS
service.
1. Displaying the received SMS
When a new message is received, a message box appears in the status
bar.
y Click the content of the chosen message. You may also display
the content on the message window.
Note: Received SMS will be saved the modem. If the modem Memory is
full, the message will saved on USIM/SIM
2. New SMS
y Click on <New> in the shortcut menu bar. An SMS creation window
will pop up;
y Enter the text.
3. Send
(1) You may enter a recipient’s number in 3 ways:
y Enter the number directly. If there are two or more recipients, use
“;” to separate each;
y Enter the name of a recipient saved in the phonebook;
y Click Icon of SMS in the pop up the window to access the
recipient’s selection window. Select one party, or more (using the
ctrl/shift key), and the click on <OK> to add the chosen party (ies )
7
Loading...