Alcatel-Lucent OmniSwitch 6450 User Manual

Alcatel-Lucent OmniSwitch 6450-10

Gigabit Ethernet LAN Switch

The Alcatel-Lucent OmniSwitch® 6450 Stackable Gigabit Ethernet LAN value switch family includes a series of 10-port models (non-PoE, Power over Ethernet [PoE], Fast and Gigabit Ethernet) for classroom, workgroup and small enterprise segments. Designed with an optimized size, low-power consumption, fan-less and fan models and a rich software feature set, the OmniSwitch 6450-10 models provide a highly available, self-protective, easily managed and eco-friendly collocation solution.

OmniSwitch 6450-P10S

OS6450-10L/10/10M

OmniSwitch 6450-P10L/P10

Service providers offering managed services have the option to install the Metro services license enabling a set of Metro Ethernet features. This allows the OmniSwitch 6450-10 port models to be quickly integrated into the provider’s network as advanced customer premise equipment (CPE) devices. The OS6450-P10S is especially designed for small cell access point deployments requiring higher PoE power and precision network timing.

The Alcatel-Lucent OmniSwitch 6450-10 models use the latest technologies and Alcatel-Lucent Operating System (AOS) innovations.

Solutions beneting from the OmniSwitch 6450-10 switches are:

• Classroom and workgroup networks

• Small enterprise or branch ofce networks

• Commercial and residential managed services

• Service Provider networks deployments

Datasheet

Alcatel-Lucent OmniSwitch 6450-10

The Alcatel-Lucent OmniSwitch 6450-10 offers eight user ports for smaller network environments. These models are power and acoustically optimized, with a half-rack width (8.5 in./21.59 cm), and have a xed conguration chassis in a 1 RU form factor. All models are fan-less (except –P10S) and have an internal power supply. The –P10L/-P10 PoE models are both IEEE 802.3af/802.3at compliant with a 115 W power budget for PoE attached devices. The P10S PoE model supports IEEE 802.3af/802.3at, and is compliant the PoE section of the PoH (Power over HDBase-T over four pair) standard with a 280W power budget for PoE attached devices.

The OmniSwitch 6450-10L/P10L models have the user port speeds xed for 10/100M operation. These models are upgradeable to gigabit speeds in the future using the OS6450-10L-UPGD license upgrade.

Table 1. OmniSwitch 6450-10 model congurations

Chassis 10/100 ports 10/100/1000

ports

Non-PoE models

OS6450-10L 8 0 2 2 Internal AC N/A

OS6450-10/10M 0 8 2 2 Internal AC N/A

PoE models

OS6450-P10L 8 0 2 2 Internal AC N/A

OS6450-P10 0 8 2 2 Internal AC N/A

OS6450-P10S 0 8 0 2 Internal AC N/A

Gig combo ports SFP uplink

(Gigabit) SFP stacking (5 Gb/s)*

Power supply supported

Backup power supply supported

Port information:

• RJ-45 combo port congurable to be RJ10/100/1000Base-T

• SFP combo port supporting 100/1000Base-X transceivers for short, long and very long distances

• SFP xed ber interfaces support only gigabit SFP transceivers or SFP stacking cable.

• All P10S ports support 1588v2 Transparent Clock and is a non-stackable switch

Technical specications

Port OS6450-10L OS6450-10/10M OS6450-P10L OS6450-P10 OS6450-P10S*

RJ-45 10/100 ports

RJ-45 10/100/1000 ports

RJ-45/SFP 10/100/1000 combo ports

SFP uplink/ stacking ports

PoE ports 0 0 8 8 8

Maximum units stackable*

Dimensions

Switch width 8.50 in. (21.5 cm) 8.50 in. (21.5 cm) 8.50 in. (21.5 cm) 8.50 in. (21.5 cm) 8.50 in. (21.5 cm)

Switch height 1.73 in. (4.4 cm) 1.73 in. (4.4 cm) 1.73 in. (4.4 cm) 1.73 in. (4.4 cm) 1.73 in. (4.4 cm)

Switch depth 11 in.

8 0 8 0 0

0 8 0 8 8

2 2 2 2 0

2 2 2 2 2

4 4 4 4 N/A

(28 cm)

11 in. (28 cm)

Datasheet

Alcatel-Lucent OmniSwitch 6450-10

Port OS6450-10L OS6450-10/10M OS6450-P10L OS6450-P10 OS6450-P10S*

Performance (Aggregated)

Switch capacity (with 2GigE uplinks)

Switch capacity (with 4GigE uplinks)

Max frame rate (4GigE or 2GigE uplinks)

Stacking capacity (2x5Gbs stacking)

Operating conditions

Operating temperature

Storage temperature

Humidity (operating and storage)

MTBF (hours) 695,192 695,192 499,729 499,729 329,729

Power supply efficiency

Fan-less design (Yes/No)

Acoustic (dB) Silent Silent Silent Silent <40 db(A)

System power consumption (watts/btu)**

• 0% traffic

• 50% traffic

• 100% traffic

PoE power budget N/A N/A 115 W 115 W 280 W

Max PoE power/ port (up to the power budget)

Ports 5-8: 31W (two pair)

PoE device heat dissipation (btu)

5.6 Gb/s 20 Gb/s 5.6 Gb/s 20 Gb/s 20 Gb/s

9.6 Gb/s 24 Gb/s 9.6 Gb/s 24 Gb/s N/A

14.28 Mp/s 35.70 Mp/s 14.28 Mp/s 35.70 Mp/s 29.76 Mp/s (2 uplinks)

10/20 Gb/s 10/20 Gb/s 10/20 Gb/s 10/20 Gb/s N/A

0°C to +45°C 32°F to +113°F

-40°C to +75°C

-40°F to +167°F

5% to 95% 5% to 95% 5% to 95% 5% to 95% 5% to 95%

85.6% 85.6% 90.1% 90.1% 88.46%

Yes Yes Yes Yes No (1+1 redundant)

12.40 W/42.31

12.70 W/43.33

N/A N/A 31 W 31 W Ports 1-4: 75 W (four pair)

N/A N/A 409 409 921

0°C to +45°C 32°F to +113°F

-40°C to +75°C

-40°F to +167°F

13.00 W/44.35

15.00 W/51.18

15.2 W/ 51.86

0°C to +45°C 32°F to +113°F

-40°C to +75°C

-40°F to +167°F

12.90 W/44.01

13.61 W/46.43

13.65 W/46.57

0°C to +45°C 32°F to +113°F

-40°C to +75°C

-40°F to +167°F

14.20 W/48.45

16.30 W/55.61

16.35 W/55.78

0°C to +45°C 32°F to +113°F

-40°C to +75°C -40°F to +167°F

20.20 W/68.92

22.25 W/75.92

23.80 W/81.20

*All PoE ports support IEEE 802.3af/802.3at. PoE (four pair) ports 1-4 are compliant with the PoE portion of the Power over HD Base-T (PoH) standard with a 280W PoE power budget.

**Power consumption measured with 64 byte packets at varied % trafc conditions on all port, including the stacking ports

Indicators

System LEDs

• System (OK) (chassis HW/SW status)

• PWR (primary power supply status)

• PRI (virtual chassis primary)

• BPS (backup power status)

• STK (stacking indicator for 10 port models)

Per-port LEDs

• 10/100/1000: PoE, link/activity

• SFP: Link/activity

• Stacking: Link/activity

Compliance and certications

Commercial

EMI/EMC

• FCC CRF Title 47 Subpart B (Class A limits. Note: Class A with UTP cables)

• VCCI (Class A limits. Note: Class A with UTP cables)

• AS/NZS 3548 (Class A limits. Note: Class A with UTP cables)

• CE-Mark: Marking for European countries (Class A limits. Note: Class A with UTP cables)

• CE-Mark

¬ 2006/95/EC: Low voltage Directive ¬ 2004/108/EC: EMC-Directive ¬ 2011/65/EU: RoHS-Directive

Datasheet

Alcatel-Lucent OmniSwitch 6450-10

+ 4 hidden pages