Alcatel Go Watch Instruction Manual

Introduction ���������������������������������
GO WATCH
Wear, Feel, Touch and Experience it.
•Raise your hand with the screen towards you to wake up your GO
WATCH and see the time.
•Track your daily activities and monitor your sleep.
•Control your device's Music Player and Camera.
•Measure your heart rate during a workout or while resting.
Onetouch Move helps you to pair the GO WATCH with your device, review your activities, set goals, etc. (Page 15)
You can download this app in any of the following ways:
- Search for "Onetouch Move" in the Google Play Store. (For Android)
- Search for "Onetouch Move" in the Apple Store. (For iOS)
- Scan the following QR code:
Minimum requirements for paired devices
•Android 4.3
•iOS 7
•Bluetooth 4.0
Compatible devices
•ALCATEL ONETOUCH idol 3 (4.7)
•ALCATEL ONETOUCH idol 3 (5.5)
•ALCATEL ONETOUCH POP 3 (5.5)
•ALCATEL ONETOUCH Go Play
•ALCATEL ONETOUCH HERO 2
•ALCATEL ONETOUCH IDOL X+
•ALCATEL ONETOUCH PIXI 8
•ALCATEL ONETOUCH PIXI 7
•ALCATEL ONETOUCH POP D5
•ALCATEL ONETOUCH POP ASTRO
•iPhone6 Plus
•iPhone6
•iPhone5s
•iPhone5c
•iPhone5
•iPhone4s
•LG G3
•LG Nexus 5
•Samsung Galaxy S6 edge
•Samsung Galaxy S6
(1)
:
(1) This list only contains the most well-known devices compatible with our GO
WATCH.
•Samsung Galaxy S5
•Samsung Galaxy Note4
•Samsung Galaxy Note3
•Samsung Galaxy Note edge
•HTC One E9
•HTC One (M8)
•Motorola Moto X
•HUAWEI Ascend P7
•HUAWEI Ascend P8
•Xiaomi 4
This device meets applicable national SAR limits of
2.0W/kg. The specific maximum SAR values can be found on page 32 of this user manual.
www.sar-tick.com
Table of Contents
Introduction �������������������������������������������������������������������������������� 1
1 Your GO WATCH ���������������������������������������������������������������� 1
1.1 Change front casing and band .................................................................. 1
1.2 Keys and port ............................................................................................... 3
1.3 Vibration reminding ................................................................................... 3
1.4 USB charging ............................................................................................... 4
1.5 Power on your GO WATCH ................................................................... 4
1.6 Power off your GO WATCH ................................................................... 4
2 Pairing ����������������������������������������������������������������������������������� 5
3 Screen������������������������������������������������������������������������������������ 7
3.1 Using the touch screen .............................................................................. 8
3.2 Adjust the sequence of main menu ........................................................ 8
4 Notifications ������������������������������������������������������������������������� 9
4.1 Icons ............................................................................................................... 9
4.2 Notifications ...............................................................................................10
5 Applications ������������������������������������������������������������������������ 11
6 Emotion Pulse �������������������������������������������������������������������� 14
7 Onetouch Move ������������������������������������������������������������������ 15
7.1 Home ...........................................................................................................15
7.2 Me ................................................................................................................18
7.3 Setting goals ................................................................................................ 19
7.4 Watch ...........................................................................................................20
7.5 Upgrade .......................................................................................................20
7.6 Settings ...................................................................................................... 21
Safety and use ��������������������������������������������������������������������������22
General information ���������������������������������������������������������������33
Warranty ����������������������������������������������������������������������������������37
Troubleshooting�����������������������������������������������������������������������39
Your GO WATCH �����������������
1
1�1 Change front casing and band
Remove the front casing.
Remove the bands.
Install the new bands.
Install the GO WATCH bands by sliding the flat side of the bands from left to right into the slots on the bottom and top of the GO WATCH. The band without the buckle goes in the bottom slot. The band with the buckle goes in the top slot.
Install the new front casing.
Bands can only be removed after the front casing is removed. Install the bands before installing the front casing.
If the front casing does not attach to the GO WATCH, make sure that the casing is in the right position and pinch it until it's held firmly in place.
1 2
1�2 Keys and port
USB port
Power and display key
Back and display key
Power and display key
•Press to wake up your GO WATCH's screen.
•Long press to power on/off the GO WATCH.
•Long press for 10 seconds to restart the GO WATCH.
Back and display key
•Press to go back to the previous screen.
•Press to wake up your GO WATCH's screen.
•Long press from any screen to open Emotion Pulse.
•Press from Home screen to enter main menu.
•Press to dismiss notifications only on the GO WATCH.
1�3 Vibration reminding
Your GO WATCH vibrates to remind you of:
•Notifications
•Call, alarm, calendar, event, etc.
•Low battery
•Disconnected from your phone
You can select the radius for your watch to vibrate after being disconnected from your phone.
3 4
1�4 USB charging
Open the USB port cover on the back of the GO WATCH. Connect it with a computer to charge via USB cable.
Use the USB cable included in the box for charging.
1�5 Power on your GO WATCH
Long press the Powe r key until the GO WATCH powers on. It will take a few seconds before the screen lights up.
1�6 Power off your GO WATCH
You can power off your GO WATCH in the following two ways:
•Long press the Powe r key. Swipe the icon right or left to power
off your GO WATCH. Press the Back key to cancel the power-off operation.
•Long press the Powe r key for around 8 seconds.
Pairing ������������������������������������
2
•Start Onetouch Move. Touch Start Pairing, choose to sign up, log in
with your account, or skip these steps and just complete your profile. Then touch Connect Your Watch.
•Turn on Bluetooth on your phone.
•Select your GO WATCH in the Available Devices list, then touch it
to connect.
•Swipe the icon left on your GO WATCH to confirm connection.
Swipe the icon right to reject pairing.
1. GO WATCH can be connected only through the Bluetooth searching in Onetouch Move.
5 6
Screen ������������������������������������
3
Home screen
Touch on Home screen or press the Back key from Home screen to access the main menu
Main menu
The screen is provided in an extended format. You can swipe left/right to view the extended screen
Press the Back key to access the Home screen
3�1 Using the touch screen
Touch
To access, select an application or confirm an action, touch it with your finger.
Swipe left/right
Swipe left/right to view applications, images, life modes and enjoy functions, change settings...
Slide
Slide up the screen to open notifications.
3�2 Adjust the sequence of main menu
To customise the sequence of the application icons in the main menu, long press an icon and drag it to the expected place.
7 8
Notifications ��������������������������
4
4�2 Notifications
When there are notifications, touch and drag up to open the Notification panel and read the detailed information
(1)
(2).(3)
4�1 Icons
Notification/Status icons
GO WATCH is disconnected with phone (in red)
Battery is low (in red) Unread message(s)
Battery is full Unread email(s)
Battery is charging (in blue)
Mute is on
Aeroplane mode is on
(1)
If your GO WATCH is well connected with phone, the Bluetooth icon will not show.
(1)(2)
(1)
Missed call(s)
Stopwatch is active
Workout tracker for running or walking is active
9 10
Incoming call Informs you when the phone gets an incoming call.
You can reject or mute
(3)
the incoming call from
the GO WATCH.
Message
(4)
Shows you the sender and contents of an incoming message.
Calendar
Reminds you of upcoming events.
reminder
Alarm When the time of your alarm set in Onetouch
Move comes, your GO WATCH will vibrate and you can dismiss it.
(1)
Make sure GO WATCH is connected with your phone.
(2)
GO WATCH will gently vibrate when there is an incoming notification.
(3)
Only for Android
(4)
Supports SMS and SNS.
Loading...
+ 16 hidden pages