Alcatel-Lucent 7342 Product Information Manual

Alcatel-Lucent 7342

INTELLIGENT SERVICES ACCESS MANAGER FIBER TO THE USER ONT R04.05.06

ONT PRODUCT INFORMATION MANUAL

3FE 51892 AAAA TCZZA Edition 01

Alcatel-Lucent Proprietary This document contains proprietary information of Alcatel-Lucent and is not to be disclosed or used except in accordance with applicable agreeme n ts. Copyright 2008 © Alcatel-Lucent. All rights reserved.

Alcatel-Lucent assumes no responsibility for the accuracy of the information presented, which is subject to change without notice.

Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other trademarks are the property of their respective owners.

Disclaimers

Alcatel-Lucent products are intended for commercial uses. Without the appropriate network design engineering, they must not be sold, licensed or otherwise distributed for use in any hazardous environments requiring fail-safe performance, such as in the operation of nuclear facilities, aircraft navigation or communication systems, air traffic control, direct life-support machines, or weapons systems, in which the failure of products could lead directly to death, personal injury, or severe physical or environmental damage. The customer hereby agrees that the use, sale, license or other distribution of the products for any such application without the prior written consent of Alcatel-Lucent, shall be at the customer's sole risk. The customer hereby agrees to defend and hold Alcatel-Lucent harmless from any claims for loss, cost, damage, expense or liability that may arise out of or in connection with the use, sale, license or other distribution of the products in such applications.

This document may contain information regarding the use and installation of non-Alcatel-Lucent products. Please note that this information is provided as a courtesy to assist you. While Alcatel-Lucent tries to ensure that this information accurately reflects information provided by the supplier, please refer to the materials provided with any non-Alcatel-Lucent product and contact the supplier for confirmation. Alcatel-Lucent assumes no responsibility or liability for incorrect or incomplete information provided about non-Alcatel-Lucent products.

However, this does not constitute a representation or warranty. The warranties provided for Alcatel-Lucent products, if any, are set forth in contractual documentation entered into by Alcatel-Lucent and its customers.

This document was originally written in English. If there is any conflict or inconsistency between the English version and any other version of a document, the English version shall prevail.

When printed by Alcatel-Lucent, this document is printed on recycled paper.

Preface

Scope

Audience

This preface provides general information about the documentation set for the 7342 ISAM Fiber to the User (7342 ISAM FTTU) optical network terminals (ONTs).

This documentation set provides information about safety, features and functionality, ordering, hardware installation and maintenance, and software installation procedures for the current release.

This documentation set is intended for planners, administrators, operators, and maintenance personnel involved in installing, upgrading, or maintaining the 7342 ISAM FTTU ONTs.

Required knowledge

The reader must be familiar with general telecommunications principles.

Acronyms and initialisms

The expansions and optional descriptions of most acronyms and initialisms appear in the glossary.

Alcatel-Lucent 7342 ISAM FTTU ONT R04.05.06 July 2008 iii 3FE 51892 AAAA TCZZA Edition 01 ONT Product Information Manual

Preface

Assistance and ordering phone numbers

Alcatel-Lucent provides global technical support through regional call centers. Phone numbers for the regional call centers are available at the following URL: www1.alcatel-lucent.com/comps/pages/carrier_support.jhtml

For technical assistance within North America, call 1-888-252-2832. If calling from outside North America, call 1-613-784-6100.

For ordering information, contact your Alcatel-Lucent sales representative.

Alcatel-Lucent quality processes

Alcatel-Lucent’s 7342 ISAM Fiber to the User (7342 ISAM FTTU) optical network terminals (ONTs) manufacturing, testing, and inspecting practices are in compliance with GR-1252-CORE and TL 9000 requirements. These requirements are documented in the Operations Quality Plan 8BD000234204QRZZA and the Alcatel-Lucent North American Quality Manual 8BD000010000QRZZA.

The quality plans and practices adequately ensure that technical requirements and customer end-point requirements are met. The customer or its representatives may be allowed to perform on-site quality surveillance audits, as agreed upon during contract negotiations.

Safety information

For ETSI and ANSI safety information, see the appropriate safety guidelines chapters.

Special information

The following are examples of how special information is presented in this document.

Danger — Danger indicates that the described activity or situation

may result in serious personal injury or death; for example, high voltage or electric shock hazards.

Warning — Warning indicates that the described activity or situation

may, or will, cause equipment damage or serious performance problems.

Caution — Caution indicates that the described activity or situation

may, or will, cause service interruption.

iv July 2008 Alcatel-Lucent 7342 ISAM FTTU ONT R04.05.06

ONT Product Information Manual Edition 01 3FE 51892 AAAA TCZZA

Note — A note provides information that is, or may be, of special

interest.

Procedures with options or substeps

When there are options in a procedure, they are identified by letters. When there are required substeps in a procedure, they are identified by roman numerals.

Procedure 1 Example of options in a procedure

At step 1, you can choose option a or b. At step 2, you must do what the step indicates.

1 This step offers two options. You must choose one of the following:

a This is one option.

b This is another option.

2 You must perform this step.

Preface

Procedure 2 Example of required substeps in a procedure

At step 1, you must perform a series of substeps within a step. At step 2, you must do what the step indicates.

1 This step has a series of substeps that you must perform to complete the step. You

must perform the following substeps:

i This is the first substep.

ii This is the second substep.

iii This is the third substep.

2 You must perform this step.

Multiple PDF document search

You can use Adobe Reader Release 6.0 and later to search multiple PDF files for a common term. Adobe Reader displays the results in a single display panel. The results are grouped by PDF file, and you can expand the entry for each file.

Alcatel-Lucent 7342 ISAM FTTU ONT R04.05.06 July 2008 v 3FE 51892 AAAA TCZZA Edition 01 ONT Product Information Manual

Preface

Note — The PDF files in which you search must be in the same

folder.

Procedure 3 To search multiple PDF files for a common term

1 Open Adobe Acrobat Reader.

2 Choose Edit→Search from the Acrobat Reader main menu. The Search PDF panel

appears.

3 Enter the search criteria.

4 Click on the All PDF Documents In radio button.

5 Select the folder in which to search using the drop-down menu.

6 Click on the Search button.

Acrobat Reader displays the search results. You can expand the entries for each document by clicking on the + symbol.

vi July 2008 Alcatel-Lucent 7342 ISAM FTTU ONT R04.05.06

ONT Product Information Manual Edition 01 3FE 51892 AAAA TCZZA

ANSI ONT safety guidelines

This chapter provides information about the mandatory regulations that govern the installation and operation of the 7342 ISAM FTTU optical network terminals (ONTs).

Safety instructions

This section describes the safety instructions that are provided in the 7342 ISAM FTTU ONT customer documentation and on the equipment.

Safety instruction boxes

The safety instruction boxes are provided in the 7342 ISAM FTTU ONT customer documentation. Observe the instructions to meet safety requirements.

The following is an example of the Danger box.

Danger — Possibility of personal injury.

The Danger box indicates that the described activity or situation may pose a threat to personal safety. It calls attention to a situation or procedure which, if not correctly performed or adhered to, may result in death or serious physical harm.

Do not proceed beyond a Danger box until the indicated conditions are fully understood and met.

The following is an example of the Warning box.

Alcatel-Lucent 7342 ISAM FTTU ONT R04.05.06 July 2008 vii 3FE 51892 AAAA TCZZA Edition 01 ONT Product Information Manual

ANSI ONT safety guidelines

The Warning box indicates that the described activity or situation may, or will, cause equipment damage, loss of data, or serious performance problems. It identifies a possible equipment-damaging situation or provides essential information to avoid the degradation of system operations or data.

Do not proceed beyond a warning until the indicated conditions are fully understood and met.

The following is an example of the Caution box.

The Caution box indicates that the described activity or situation may, or will, cause service interruption.

Do not proceed beyond a caution until the indicated conditions are fully understood and met.

Warning 1 — Possibility of equipment damage. Warning 2 — Possibility of data loss.

Caution 1 — Possibility of service interruption. Caution 2 — Service interruption.

The following is an example of the Note box.

Note — Information of special interest.

The Note box provides information that assists the personnel working with 7342 ISAM FTTU ONTs. It does not provide safety-related instructions.

Safety-related labels

The ONT equipment is labeled with specific safety compliance information and instructions that are related to a variant of the ONT. Observe the instructions on the safety labels.

Table 1 provides examples of the text in the various ONT safety labels.

Table 1 Safety labels

Description Label text

UL compliance Communication service equipment US listed. Type 3R enclosure -

TUV compliance Type 3R enclosure - Rainproof.

ESD warning Caution: This assembly contains electrostatic sensitive device.

Rainproof.

(1 of 2)

viii July 2008 Alcatel-Lucent 7342 ISAM FTTU ONT R04.05.06

ONT Product Information Manual Edition 01 3FE 51892 AAAA TCZZA

ANSI ONT safety guidelines

Description Label text

Laser classification Class 1 laser product

Laser product compliance This laser product conforms to all applicable standards of 21 CFR

1040.10 at date of manufacture.

Laser product compliance Complies with 21 CFR 1040.10 and 1040.11 except for deviations

pursuant to laser notice no. 50, dated July 26, 2001.

FCC standards compliance Tested to comply with FCC standards for home or office use.

Operation conditions This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Canadian standard

This Class A digital apparatus complies with Canadian ICES-003.

compliance (modular ONT)

Canadian standard

This Class B digital apparatus complies with Canadian ICES-003.

compliance (outdoor ONT)

CE marking There are various CE symbols for CE compliance.

(2 of 2)

Figure 1 shows a sample safety label on the ONT equipment.

Figure 1 Safety label on the ONT equipment

Tested to Comply with FCC Standards

FOR HOME OR OFFICE USE

COMMUNICATION SERVICE EQUIPMENT US LISTED

27FY Type 3R Enclosure - Rainproof

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numerique de la class A est conforme a la norme NMB-003 du Canada

This Assembly Contains Electrostatic Sensitive Devices

CAUTION

Safety standards compliance

This section describes the ONT compliance with North American safety standards.

1853

Alcatel-Lucent 7342 ISAM FTTU ONT R04.05.06 July 2008 ix 3FE 51892 AAAA TCZZA Edition 01 ONT Product Information Manual

ANSI ONT safety guidelines

EMC, EMI, and ESD standards compliance

The ONT equipment complies with the following requirements:

• Federal Communications Commission (FCC) CFR 47, Part 15, Subpart B, Class

A requirements for OLT equipment

• GR-1089-CORE requirements, including:

Equipment safety standard compliance

The ONT equipment complies with the requirements of UL60950-1, Safety of Information Technology Equipment.

Environmental standards compliance

The ONT equipment complies with the following standards:

• Section 3 Electromagnetic Interference, Emissions Radiated and Conducted

• Section 3 Immunity, Radiated and Conducted

• Section 2 ESD Discharge Immunity: System Level Electrostatic Discharge and EFT

Immunity: Electrically Fast Transients

• GR-63-CORE (NEBS): requirements related to operating, storage, humidity,

altitude, earthquake, office vibration, transportation and handling, fire resistance and spread, airborne contaminants, illumination, and acoustic noise

• GR-487-CORE: requirements related to rain, chemical, sand, and dust

• GR-487 R3-82: requirements related to condensation

• GR-3108: Requirements for Network Equipment in the Outside Plant (OSP)

• TP76200: Common Systems Equipment Interconnec tio ns Standards

Laser product standards compliance

The ONT equipment complies with 21 CFR 1040.10/21 CFR 1040.11, 21 CFR utilizing Laser Notice No. 50 or CDRH Laser Notice 42 of the regulations for lasers and laser products by the U.S. Center for Devices and Radiological Health (CDRH) of the Food and Drug Administration (FDA).

Resistibility requirements compliance

The ONT equipment complies with the requirements of ITU Recommendation K.21 for resistibility of telecommunication equipment installed in customer premises to overvoltage and overcurrents.

Electrical safety guidelines

This section provides the electrical safety guidelines for the ONT equipment.

x July 2008 Alcatel-Lucent 7342 ISAM FTTU ONT R04.05.06

ONT Product Information Manual Edition 01 3FE 51892 AAAA TCZZA

ANSI ONT safety guidelines

Note — The ONTs comply with the U.S. National Electrical Code.

However, local electrical authorities have jurisdiction when there are differences between the local and U.S. standards.

Power supplies

The use of any non-Alcatel-Lucent approved power supplies or power adaptors is not supported or endorsed by Alcatel-Lucent. Such use will void any warranty or support contract with Alcatel-Lucent. Such use greatly increases the danger of damage to equipment or property.

Cabling

The following are the guidelines regarding cables used for the ONT equipment:

• Use only cables approved by the relevant national electrical code.

• Use cables suitable for outdoor use for outdoor installation of ONTs.

• The ONTs have been evaluated for use with external POTS wiring without

primary protection that may not exceed 140 ft (43 m) in reach. However, the power cable must not exceed 100 ft (31 m).

Protective earth

Earthing and bonding of the ONTs must comply with the requirements of NEC article 250 or local electrical codes.

ESD safety guidelines

The ONT equipment is sensitive to ESD. Operations personnel must observe the following ESD instructions when they handle the ONT equipment.

Caution — This equipment is ESD sensitive. Proper ESD protections

should be used when entering the TELCO Access portion of the ONT.

During installation and maintenance, service personnel must wear wrist straps to prevent damage caused by ESD.

Alcatel-Lucent recommends that you prepare the site before you install the ONT equipment. In addition, you must control relative humidity, use static dissipating material for furniture or flooring, and restrict the use of air conditioning.

Laser safety guidelines

Only qualified service personnel who are extremely familiar with laser radiation hazards should install or remove the fiber optic cables and units in this system.

Alcatel-Lucent 7342 ISAM FTTU ONT R04.05.06 July 2008 xi 3FE 51892 AAAA TCZZA Edition 01 ONT Product Information Manual

ANSI ONT safety guidelines

Observe the following warnings when you perform installation, operations, and maintenance tasks on the ONT equipment.

Observe the following danger for a laser hazard. Eyes can be damaged when they are exposed to a laser beam. Take necessary precautions before you plug in the optical modules.

Laser warning labels

The following figures show the labels related to laser product, classification and warning.

Figure 2 shows a laser product label.

Danger — There may be invisible laser radiation at the fiber optic

cable when the cable is removed from the connector. Avoid direct exposure to beam.

Danger — Possibility of equipment damage. Risk of eye damage by

laser radiation.

Figure 2 Laser product label

Figure 3 shows a laser classification label. Laser classification labels may be provided in other languages.

Figure 3 Laser classification label

CLASS 1 LASER PRODUCT PRODUCTO LASER CLASE 1

1845

xii July 2008 Alcatel-Lucent 7342 ISAM FTTU ONT R04.05.06

ONT Product Information Manual Edition 01 3FE 51892 AAAA TCZZA

LASER CLASSE 1CLASE 1 DEL LASER

1899

ANSI ONT safety guidelines

Figure 4 shows a laser warning label and an explanatory label for laser products. Explanatory labels may be provided in other languages. The explanatory label provides the following information:

• a warning that calls attention to the invisible laser radiation

• an instruction against staring into the beam or viewing directly with optical

instruments

• wavelength

• normal output power

• maximum output power

Figure 4 Laser warning labels

INVISIBLE LASER RADIATION DO NOT STARE INTO BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS Wavelength(s): xxxx nm Normal output power: xx m W Max output power: yyy m W

Laser Warning Label

CLASS 1 LASER PRODUCT

RAYONNEMENT LASER CLASSE 1 RAYONNEMENT LASER INVISIBLE

NE PAS DEMONTER. FAIRE APPEL A UN PERSONNELL QUALIFIE

RADIACION DE LASER INVISIBLE. EVITAR CUALOUIER EXPOSICION AL

RAYO LASER. NO DESMONTAR. LLAMAR A PERSONAL AUTORIZADO

INVISIBLE LASER RADIATION PRESENT AT FIBER OPTIC CABLE WHEN NOT CONNECTED. AVOID DIRECT EXPOSURE TO BEAM.

EVITER TOUTE EXPOSITION AU FAISCEAU

CLASE 1 DEL LASER

Laser Warning Label

Laser classification

The ONT is classified as a Class 1 laser product based on its transmit optical output. For Class 1 laser products, lasers are safe under reasonably foreseeable conditions of

operation, including the use of optical instruments for intrabeam viewing.

1899

Figure 5 shows a sample laser product safety label on the ONT equipment.

Alcatel-Lucent 7342 ISAM FTTU ONT R04.05.06 July 2008 xiii 3FE 51892 AAAA TCZZA Edition 01 ONT Product Information Manual

ANSI ONT safety guidelines

Transmit optical output

The maximum transmit optical output of an ONT is +5 dBm.

Normal laser operation

In normal operation, fiber cable laser radiation is always off until it receives signal from the line terminal card.

Figure 5 Laser product safety label on the ONT equipment

CLASS 1 LASER PRODUCT

THIS LASER PRODUCT CONFORMS TO ALL APPLICABLE

STANDARDS OF 21 CFR 1040.10 AT DATE OF MANUFACTURE.

MANUFACTURED:

MONTH YEAR

1853

Operating personnel must observe the instructions on the laser explanatory label before plugging in the optical module.

Danger — Risk of eye damage by laser radiation.

Location class

Use cable supports and guides to protect the receptacles from strain.

Environmental requirements

See the ONT technical specification documentation for temperature ranges for ONTs.

During operation in the supported temperature range, condensation inside the ONT caused by humidity is not an issue. To avoid cond en satio n cau sed by rapid chan ges in temperature and humidity, Alcatel-Lucent recommends:

• The door of the ONT not be opened until temperature inside and outside the

enclosure has stabilized.

• If the door of the ONT must be opened after a rapid change in temperature or

humidity, use a dry cloth to wipe down the metal interior to prevent the risk of condensation.

• When high humidity is present, installation of a cover or tent over the ONT helps

prevent condensation when the door is opened.

xiv July 2008 Alcatel-Lucent 7342 ISAM FTTU ONT R04.05.06

ONT Product Information Manual Edition 01 3FE 51892 AAAA TCZZA

ETSI ONT safety guidelines

This chapter provides information about the mandatory regulations that govern the installation and operation of the 7342 ISAM FTTU optical network terminals (ONTs).