Boom Arm Mower
Rev 02-12
PART'S MANUAL
Part No. 02968915P
An Operator's Manual was shipped with the equipment in the Manual Canister. This Operator's Manual is an integral part of the safe operation of this machine and must be maintained with the unit at all times. READ, UNDERSTAND, and FOLLOW the Safety and Operation Instructions contained in this manual before operating the equipment. If the Operator's Manual is not with the equipment, contact your dealer or Alamo Industrial (800-356-6286) to obtain a Free copy before operating the equipment.
ALAMO INDUSTRIAL
1502 E. Walnut Seguin, Texas 78155
210-372-3551
© 2012 Alamo Group Inc.
® |
® |
To the Owner/Operator/Dealer
All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded operator who recognizes the potential hazards and follows reasonable safety practices. The manufacturer has designed this implement to be used with all its safety equipment properly attached to minimize the chance of accidents.
BEFORE YOU START!!Read the safety messages on the implement and shown in your manual. Observe the rules of safety and common sense!
WARRANTY INFORMATION:
Read and understand the complete Warranty Statement found in this Manual. Fill out the Warranty Registration Form in full and return it within 30 Days. Make certain the Serial Number of the Machine is recorded on the Warranty Card and on the Warranty Form that you retain. The use of "will-fit" parts will void your warranty and can cause catastrophic failure with possible injury or death.
BOLT TORQUE
Mounting procedures for mowers will require a significant amount of bolt nut and washer installation.
Frame and structure mounting bolts should be installed using Red Loctite, and torqued to the dry values listed in the torque chart based on the bolt size and hardness.
Other structures such as pump mounting bolts should be installed with Blue Loctite and torqued to the dry values indicated in the chart.
Bolt tightness should be completed with and checked with a suitable torque wrench.
Torque checks should be completed throughout the life of the mower in accordance with the maintenance chart provided in this manual.
Loose bolts on a frame or in a casting may be a result of:
●● Vibration from the mower due to imbalance of the mower blades ●● Pulled threads due to over tightening
●● Distortion of the hole due to under tightening during installation
Bolts broken or sheared in the mounting structure or tractor may be the result of:
●● Improper alignment of the Mounting Plate or Structure such that it is not sitting flat on the mating surface
●● Distortion of the bolt due to over-tightening ●● Under tightening of the bolts
Check the bolt torque during installation and prior to delivery with a suitable torque wrench.
PARTS
SECTION
Parts Section – 1
PARTS ORDERING GUIDE
The following instructions are offered to help eliminate needless delay and error in processing purchase orders for the equipment in this section.
1.The Parts Section is prepared in logical sequence and grouping of parts that belong to the basicmachinefeaturedinthismanual.PartNumbersandDescriptionsaregiventohelplocate the parts and quantities required.
2.ThePurchaseOrdermustincludethenameandaddressofthepersonororganizationordering the parts, who should be charged, and if possible, the serial number of the machine for which the parts are ordered.
3.The Purchase Order must clearly list the quantity of each part, the complete and correct part number (be sure to include all periods), and the basic name of the part.
4.The Manufacturer reserves the right to substitute parts where applicable.
5.Some parts are unlisted items which are special production items not normally stocked and are subject to special handling. Request a quotation for such parts before sending a Purchase
Order.
6.The Manufacturer reserves the right to change prices without prior notice.
For maximum safety and to guarantee optimum product reliability, always use genuineAlamoIndustrialParts.Theuseofinferiorreplacementpartsmaycause premature or catastrophic failure which could result in serious injury or death. Direct any questions regarding parts to:
ALAMO INDUSTRIAL
1502 E. Walnut Seguin, Texas 78155 830-379-1480
® |
® |
©2012 Alamo Group Inc. |
Parts Section – 2 |
PART NAME INDEX |
|
50 IN BLADE CARRIER ASY (PAN) - PN 02964457................................................................................................................................. |
6 |
50 IN BOOM AXE HEAD SUB ASSEMBLY............................................................................................................................................. |
7 |
50 IN BOOM AXE HEAD ASSEMBLY...................................................................................................................................................... |
9 |
50 IN MOTOR & SPINDLE ASY............................................................................................................................................................... |
11 |
50 IN MOTOR ASY - PARTS - PN 02979881 (PART 1).......................................................................................................................... |
13 |
50 IN MOTOR ASY - PARTS - PN 02979881 (PART 2).......................................................................................................................... |
15 |
50 IN SPINDLE ASY - PN 02960553B...................................................................................................................................................... |
17 |
60 IN BLADE CARRIER ASY (BAR) - PN 02969230.............................................................................................................................. |
18 |
60 IN DOOR CYL ASY - PN 02961480A.................................................................................................................................................. |
19 |
60 IN HEAD ASY - SN 02050 & DOWN................................................................................................................................................... |
21 |
60 IN HEAD ASY - SN 02051 & UP.......................................................................................................................................................... |
23 |
60 IN HEAD SUB-ASY - SN 02050 & DOWN.......................................................................................................................................... |
25 |
60 IN HEAD SUB-ASY - SN 02051 & UP................................................................................................................................................. |
27 |
60 IN MOTOR ASY - PARTS - PN 02979881 - SN 02051 (PART 1)....................................................................................................... |
29 |
60 IN MOTOR ASY - PARTS - PN 02979881 - SN 02051 (PART 2)....................................................................................................... |
31 |
60 IN SPINDLE ASY - PN 02968859A...................................................................................................................................................... |
33 |
BOOM ASY - 17 FT (OPT ALLOY STEEL) - PN 02980034.................................................................................................................... |
35 |
BOOM ASY - 17 FT (STD STEEL) - PN 02979902.................................................................................................................................. |
37 |
BOOM ASY - 21 FT (STD & ALLOY STEEL) (PART 1)........................................................................................................................ |
39 |
BOOM ASY - 21 FT (STD & ALLOY STEEL) (PART 2)........................................................................................................................ |
41 |
BOOM ASY - 24 FT (STD & ALLOY STEEL) (PART 1)........................................................................................................................ |
43 |
BOOM ASY - 24 FT (STD & ALLOY STEEL) (PART 2)........................................................................................................................ |
45 |
BOOM HOSE SCHEMATIC - 17 FT BOOM ARM.................................................................................................................................. |
47 |
BOOM HOSE SCHEMATIC - 21 FT BOOM ARM.................................................................................................................................. |
49 |
BOOM HOSE SCHEMATIC - 24 FT BOOM ARM.................................................................................................................................. |
51 |
BUZZ BAR - HYD MOTOR PARTS - P/N 02975175............................................................................................................................... |
53 |
BUZZ BAR ASY - 48 IN - GEN 1 (PART 1)............................................................................................................................................. |
55 |
BUZZ BAR ASY - 48 IN - GEN 1 (PART 2)............................................................................................................................................. |
57 |
BUZZ BAR ASY - 48 IN - GEN 1 (PART 3)............................................................................................................................................. |
59 |
BUZZ BAR ASY - 48 IN - GEN 2 (PART 1)............................................................................................................................................. |
61 |
BUZZ BAR ASY - 48 IN - GEN 2 (PART 2)............................................................................................................................................. |
63 |
BUZZ BAR ASY - 69 IN - GEN 1 (PART 1)............................................................................................................................................. |
65 |
BUZZ BAR ASY - 69 IN - GEN 1 (PART 2)............................................................................................................................................. |
67 |
BUZZ BAR ASY - 69 IN - GEN 1 (PART 3)............................................................................................................................................. |
69 |
BUZZ BAR ASY - 69 IN - GEN 2 (PART 1)............................................................................................................................................. |
71 |
BUZZ BAR ASY - 69 IN - GEN 2 (PART 2)............................................................................................................................................. |
73 |
BUZZ BAR ASY - 90 IN - GEN 1 (PART 1)............................................................................................................................................. |
75 |
BUZZ BAR ASY - 90 IN - GEN 1 (PART 2)............................................................................................................................................. |
77 |
BUZZ BAR ASY - 90 IN - GEN 1 (PART 3)............................................................................................................................................. |
79 |
BUZZ BAR ASY - 90 IN - GEN 2 (PART 1)............................................................................................................................................. |
81 |
Machete Boom 17 21 and 24 04-04 Rev 02-12
©2012 Alamo Group Inc. |
Parts Section -3 |
PART NAME INDEX
BUZZ BAR ASY - 90 IN - GEN 2 (PART 2)............................................................................................................................................. |
83 |
BUZZ BAR MOTOR ASSEMBLY............................................................................................................................................................. |
85 |
BUZZ BAR SPINDLE ASY - SN BB-01219.............................................................................................................................................. |
87 |
DITCHER - BLADE CARRIER ASY......................................................................................................................................................... |
88 |
DITCHER - HOUSING ASY...................................................................................................................................................................... |
89 |
DITCHER - SPINDLE ASY........................................................................................................................................................................ |
91 |
DITCHER BLADE HEAD ASY - ROUGH CUT....................................................................................................................................... |
93 |
DITCHER HEAD ASY - (NEW STYLE)................................................................................................................................................... |
95 |
DITCHER HEAD ASY - (OLD STYLE).................................................................................................................................................... |
97 |
DITCHER HEAD DEFLECTOR CYLINDER........................................................................................................................................... |
99 |
FILTER ASY - PN 02976066.................................................................................................................................................................... |
101 |
FILTER ASY - PN 02985280.................................................................................................................................................................... |
103 |
FLAIL AXE - DOOR CYL ASY - PN 02970710A................................................................................................................................... |
104 |
FLAIL AXE - HEAD ASY (PART 1)....................................................................................................................................................... |
105 |
FLAIL AXE - HEAD ASY (PART 2)....................................................................................................................................................... |
107 |
FLAIL AXE - HOSE CONNECTIONS..................................................................................................................................................... |
109 |
FLAIL AXE - ROTOR W/KNIVES.......................................................................................................................................................... |
110 |
FML100H FLAIL - HEAD ASY (PART 1).............................................................................................................................................. |
111 |
FML100H FLAIL - HEAD ASY (PART 2).............................................................................................................................................. |
113 |
FML100H FLAIL - HEAD ASY (PART 3).............................................................................................................................................. |
115 |
FML100H FLAIL - SPINDLE ASY - PN 02969661................................................................................................................................ |
117 |
GRASS FLAIL - CUTTERSHAFT ASY.................................................................................................................................................. |
118 |
GRASS FLAIL - CUTTERSHAFT BRGS................................................................................................................................................ |
119 |
GRASS FLAIL - HEAD ASY................................................................................................................................................................... |
121 |
GRASS FLAIL - HEAD SUB-ASY.......................................................................................................................................................... |
123 |
GRASS FLAIL - PULLEY ASY............................................................................................................................................................... |
125 |
GRASS FLAIL - ROLLER ASY............................................................................................................................................................... |
127 |
HIGH FRAME ASY - 2 WD & 4 WD....................................................................................................................................................... |
129 |
HYD CYL ASY - DIPPER - PN 02967174A (21 & 24 FT)...................................................................................................................... |
131 |
HYD CYL ASY - DIPPER - PN 02979920 (17 FT).................................................................................................................................. |
132 |
HYD CYL ASY - LIFT - PN 02967173A................................................................................................................................................. |
133 |
HYD CYL ASY - SWING - PN 02967172A............................................................................................................................................. |
134 |
HYD CYL ASY - TILT - PN 02967175A................................................................................................................................................. |
135 |
HYD LOCK VALVE SOLENOID ASY - PN 02972208 (OLD STYLE)................................................................................................ |
136 |
HYD LOCK VALVE SOLENOID ASY - PN 02972208A (NEW STYLE)............................................................................................ |
137 |
HYD TANK ASY - PN 02976712 (OCFD) & PN 02976765 (CCLS)...................................................................................................... |
139 |
HYD TANK SUB-ASY - PN 02976767.................................................................................................................................................... |
141 |
JOYSTICK CONSOLE ASY..................................................................................................................................................................... |
143 |
KING POST SUB-ASY............................................................................................................................................................................. |
145 |
Machete Boom 17 21 and 24 04-04 Rev 02-12
©2012 Alamo Group Inc. |
Parts Section -4 |
PART NAME INDEX
MOUNTING COMPONENTS - COMMON BOX (PART 1).................................................................................................................. |
147 |
MOUNTING COMPONENTS - COMMON BOX (PART 2).................................................................................................................. |
149 |
MOUNTING COMPONENTS - COMMON BOX (PART 3).................................................................................................................. |
151 |
PUMP ASY - SERVO CONTROLED - PN 02969527A (PART 1)......................................................................................................... |
153 |
PUMP ASY - SERVO CONTROLED - PN 02969527A (PART 2)......................................................................................................... |
155 |
TIMBERCAT - HEAD ASY (PART 1)..................................................................................................................................................... |
157 |
TIMBERCAT - HEAD ASY (PART 2)..................................................................................................................................................... |
159 |
VALVE - PARTS - OPEN & CLOSED CENTER.................................................................................................................................... |
161 |
VALVE ASY - 5 SPOOL (CCLS)............................................................................................................................................................. |
163 |
VALVE ASY - 5 SPOOL (OCFD)............................................................................................................................................................ |
165 |
Machete Boom 17 21 and 24 04-04 Rev 02-12
©2012 Alamo Group Inc. |
Parts Section -5 |
50 IN BLADE CARRIER ASY (PAN) - PN 02964457
ITEM |
PART NO. |
QTY. |
DESCRIPTION |
|
02964457 |
- |
BLADE / SPIDER PAN ASY |
1 |
02964804 |
1 |
SPIDER PAN SUB-ASY (W/ ITEMS 7,8,9 & 10) |
2 |
02962722 |
1 |
BLADE SET, MATCHED SET OF 3 |
3 |
02964330 |
3 |
BLADE BOLT |
4 |
00755623 |
3 |
WASHER, SPECIAL ( HARDENED ) |
5 |
00023200 |
3 |
ROLL PIN |
6 |
00020900 |
3 |
SLOTTED HEX NUT, 1-1/8"-NF PL GR5 |
7 |
02030300 |
3 |
LOCKNUT, 1"-NC PLB |
8 |
00748547 |
3 |
FLATWASHER, 1-1/32" X 2-3/16" X.22" |
9 |
02964162 |
3 |
SPACER |
10 |
7A16824 |
3 |
BOLT, HEX HEAD 1"-NC X 3"PL GR5 |
11 |
00003901 |
4 |
LOCKWASHER, 3/4" PL HEAVY |
12 |
02886600 |
4 |
BOLT, SOCKET HEAD 3/4"-NC X 2-1/2" PL GR8 |
13 |
02964954 |
3 |
KEY |
14 |
02964161 |
3 |
BUSHING |
15 |
02965229 |
3 |
SPACER |
Machete Boom 17 21 and 24 04-04 Rev 02-12
©2012 Alamo Group Inc. |
Parts Section -6 |
50 IN BOOM AXE HEAD SUB ASSEMBLY
Machete Boom 17 21 and 24 04-04 Rev 02-12
©2012 Alamo Group Inc. |
Parts Section -7 |
50 IN BOOM AXE HEAD SUB ASSEMBLY
Continued... |
|
|
|
ITEM |
PART NO. QTY. |
DESCRIPTION |
|
|
02980202 |
1 |
ASY, 50" B/A ROT PISTON |
1 |
02974664 |
1 |
X-FRAME SQ. HD. WLDMT. 50" |
2 |
02980205 |
1 |
WELDMENT, HITCHPOST ADAPTER |
3 |
02980204 |
1 |
ASY, MOTOR/SPINDLE |
4 |
02964457 |
1 |
PAN ASSY 50" HEAD |
5 |
02984822 |
1 |
SPACER BLADE PAN |
6 |
02960882 |
1 |
R.H. SKID SHOE |
7 |
02960883 |
1 |
L. H. SKID SHOE |
8 |
00011100 |
46 |
FLATWASHER 3/8 STD |
9 |
00015800 |
39 |
LOCKNUT TLM 3/8 NC PLC |
10 |
00059700 |
7 |
FSCS 3/8 NC X 1-1/4 |
11 |
00003901 |
4 |
LOCKWASHER 3/4 HEAVY |
12 |
00037200 |
20 |
NUT 3/4 NC LOCKNUT |
13 |
02964861 |
4 |
SHCS 3/4 NC 4" LG PL8 |
14 |
02973438 |
6 |
HHCS 3/4 NC 3-1/4 PL8 |
15 |
02959390 |
14 |
HHCS 3/4 NC 2-1/4 PL8 |
16 |
02980373 |
1 |
ADP HYD STGHT 10MB-16MJ |
17 |
02968896 |
1 |
PLASTIC TIE, ORANGE, 11LG |
18 |
02968895 |
1 |
PLASTIC TIE, BLUE, 11LG |
19 |
02968894 |
1 |
PLASTIC TIE, RED, 11LG |
Machete Boom 17 21 and 24 04-04 Rev 02-12
©2012 Alamo Group Inc. |
Parts Section -8 |
50 IN BOOM AXE HEAD ASSEMBLY
Machete Boom 17 21 and 24 04-04 Rev 02-12
©2012 Alamo Group Inc. |
Parts Section -9 |
50 IN BOOM AXE HEAD ASSEMBLY
Continued... |
|
|
|
ITEM |
PART NO. QTY. |
DESCRIPTION |
|
|
02980202 |
1 |
ASY, 50" B/A ROT PISTON |
1 |
02974664 |
1 |
X-FRAME SQ. HD. WLDMT. 50" |
2 |
02974483 |
1 |
WLDMT DOOR - BA50 |
3 |
02971928 |
1 |
WLDMT, HITCHPOST, MACHETE |
4 |
02961480A |
1 |
HYD CYLINDER 2BORE X 9-1/4 STROKE |
5 |
02960885 |
2 |
FLAP, FRONT DEFLECTOR |
6 |
02960886 |
2 |
REAR FLAP MODIFIED |
7 |
02975227 |
6 |
FLAP, 13 X 8 |
8 |
02975228 |
2 |
FLAP, 13X8-TAPER END |
9 |
02957380 |
1 |
SIDE GUARD |
10 |
02957496 |
1 |
REAR FLAP RETAINER |
11 |
5710121 |
1 |
PLATE, INSPECTION COVER |
12 |
02960018 |
2 |
ADP, HYD, ELBOW, 4MB-4MJ90 |
13 |
00753642 |
6 |
HHCS 3/8 NC 1-1/4 PL5 |
14 |
00011100 |
46 |
FLATWASHER 3/8 STD |
15 |
00015800 |
39 |
LOCKNUT TLM 3/8 NC PLC |
16 |
02035800 |
23 |
WASHER, 3/8", SPECIAL PLATED |
17 |
00007000 |
23 |
HHCS 3/8 NC 1-3/4 PL5 |
18 |
5F5180 |
2 |
NUT, 5/16 NC WING |
19 |
00755153 |
2 |
PIN, COTTER 3/16 X 1-1/2 PL |
20 |
02976448 |
1 |
PIN - MACHINED HEAD |
21 |
651102 |
1 |
PIN-DRILLED |
22 |
00037200 |
20 |
NUT 3/4 NC LOCKNUT |
23 |
00011400 |
2 |
BOLT, HHCS 3/8 NC 1 PL5 |
24 |
02959390 |
14 |
HHCS 3/4 NC 2-1/4 PL8 |
25 |
02970595 |
1 |
HHCS 3/8 NC 2-3/4 PL8 |
26 |
02971701 |
1 |
NUT, SLOTTED 1-3/8 12NF PLB |
27 |
02971702 |
1 |
FLATWASHER, 1-3/8 TYPE B PL NARROW |
28 |
02971720 |
1 |
PIN WLDMNT, 11-1/2" LONG |
29 |
02971756 |
1 |
PIN - 1/2 X 9 CHROME |
30 |
165020 |
1 |
PIN, COTTER 5/16 X 2-1/2 PL |
31 |
02968836 |
1 |
PLASTIC TIE, YELLOW |
32 |
02968837 |
1 |
PLASTIC TIE, YELLOW & WHITE |
Machete Boom 17 21 and 24 04-04 Rev 02-12
©2012 Alamo Group Inc. |
Parts Section -10 |
50 IN MOTOR & SPINDLE ASY
Machete Boom 17 21 and 24 04-04 Rev 02-12
©2012 Alamo Group Inc. |
Parts Section -11 |
50 IN MOTOR & SPINDLE ASY
Continued... |
|
|
|
ITEM |
PART NO. QTY. |
DESCRIPTION |
|
|
02980204 |
- |
MOTOR & SPINDLE ASY, F/ 50" ROTARY HEAD |
1 |
02979881 |
1 |
MOTOR ASY, PISTON TYPE MOTOR |
2 |
02960553B |
1 |
SPINDLE ASY, SPLINED TYPE |
3 |
02961038 |
1 |
GASKET, F/ MOTOR TO SPINDLE |
4 |
02981819 |
4 |
ADP HYD STGHT 16FLH-16MJ SPCL |
5 |
02981819 |
2 |
ADP HYD STGHT 16FLH-16MJ SPCL |
6 |
02980237 |
2 |
O-RING |
7 |
02980373 |
1 |
ADAPTER, STRAIGHT |
8 |
02980236 |
8 |
BOLT |
9 |
00022200 |
8 |
LOCKWASHER |
10 |
02891800 |
4 |
BOLT |
11 |
00019600 |
4 |
LOCKWASHER |
Machete Boom 17 21 and 24 04-04 Rev 02-12
©2012 Alamo Group Inc. |
Parts Section -12 |
50 IN MOTOR ASY - PARTS - PN 02979881 (PART 1)
Machete Boom 17 21 and 24 04-04 Rev 02-12
©2012 Alamo Group Inc. |
Parts Section -13 |
50 IN MOTOR ASY - PARTS - PN 02979881 (PART 1)
Continued... |
|
|
|
ITEM |
PART NO. QTY. |
DESCRIPTION |
|
|
02979881 |
- |
MOTOR ASY, PISTON TYPE |
1 |
02980529 |
1 |
BARREL HOUSING ASY |
2 |
02980530 |
1 |
VALVE PLATE (IN ITEM 39) |
4 |
02980536 |
1 |
NOZZLE |
5 |
02980537 |
1 |
PLUG ASY, HEXAGON |
6 |
02980538 |
1 |
BEARING HOUSING |
7 |
02980539 |
1 |
O-RING (IN ITEM 39 & 40) |
8 |
02980540 |
1 |
O-RING (IN ITEM 39 & 40) |
9 |
02980541 |
1 |
SEAL CARRIER |
10 |
02980542 |
1 |
SHAFT SEAL (IN ITEM 39 & 40) |
11 |
02980543 |
1 |
SPACER WASHER |
|
02988818 |
1 |
SEAL, SHAFT |
12 |
02980544 |
1 |
RETAINING RING |
13 |
02980545 |
1 |
RETAINING RING |
14 |
02980546 |
1 |
SHAFT ASY |
15 |
02980548 |
1 |
CYLINDER BARREL (IN ITEM 39) |
16 |
02980549 |
1 |
BARREL SUPPORT |
17 |
02980550 |
7 |
PISTON ASY (IN ITEM 39) |
18 |
02989112 |
1 |
KIT, 21 PISTON RINGS |
19 |
02980552 |
1 |
RING GEAR |
20 |
02980553 |
1 |
BEARING ASY, CUP & CONE |
21 |
02980554 |
1 |
BEARING ASY, CUP & CONE |
22 |
02980555 |
- |
SPACER WASHER |
23 |
02980556 |
1 |
RETAINING RING |
24 |
02980557 |
- |
SHIM, .020" (0.5) |
|
02980558 |
- |
SHIM, .007" (0.2) |
|
02980559 |
- |
SHIM, .015" (0.4) |
|
02980560 |
- |
SHIM, .023" (0.6) |
|
02980561 |
- |
SHIM, .030" (0.8) |
|
02980562 |
- |
SHIM, .039" (1.0) |
|
02980563 |
- |
SHIM, .027" (0.7) |
25 |
02980564 |
4 |
BOLT, SOCKET HEAD |
26 |
02980565 |
4 |
LOCKWASHER M13 X 19.5 |
27 |
02980547 |
1 |
GUIDE PIN |
28 |
02980571 |
1 |
RELIEF MANIFOLD |
|
02980570 |
- |
SEAL KIT, F/ RELIEF VALVE |
29 |
02980568 |
1 |
RELIEF VALVE, 4061 PSI (280 BAR) |
30 |
02980569 |
1 |
RELIEF VALVE, 4786 PSI (330 BAR) |
31 |
02980237 |
2 |
O-RING |
32 |
02980531 |
1 |
FLAT KEY |
33 |
02980532 |
2 |
BALL |
Machete Boom 17 21 and 24 04-04 Rev 02-12
©2012 Alamo Group Inc. |
Parts Section -14 |
50 IN MOTOR ASY - PARTS - PN 02979881 (PART 2)
Machete Boom 17 21 and 24 04-04 Rev 02-12
©2012 Alamo Group Inc. |
Parts Section -15 |
50 IN MOTOR ASY - PARTS - PN 02979881 (PART 2)
Continued... |
|
|
|
ITEM |
PART NO. QTY. |
DESCRIPTION |
|
34 |
02980533 |
1 |
HEXAGON PLUG |
35 |
02980534 |
2 |
O-RING |
36 |
02980535 |
2 |
PLUG ASY |
37 |
02980572 |
2 |
PLUG ASY |
38 |
02980573 |
1 |
PLUG ASY |
39 |
02980566 |
1 |
REBUILD KIT (ITEMS 2,7,8,10,15 & 17) |
40 |
02980567 |
1 |
SEAL KIT (ITEMS 7,8 &10) |
Machete Boom 17 21 and 24 04-04 Rev 02-12
©2012 Alamo Group Inc. |
Parts Section -16 |
50 IN SPINDLE ASY - PN 02960553B
ITEM |
PART NO. |
QTY. |
DESCRIPTION |
|
02960553B |
- |
SPINDLE & HOUSING ASY |
1 |
02963815 |
1 |
HOUSING |
2 |
02960561 |
1 |
SPINDLE |
3 |
02960558 |
1 |
BEARING RING |
4 |
02960559 |
1 |
SEAL |
5 |
00754627 |
1 |
SNAP RING |
6 |
02960557 |
1 |
BEARING ASY, CUP & CONE |
7 |
00769938 |
1 |
BEARING ASY, CUP & CONE |
8 |
02962030 |
1 |
NUT |
9 |
02979570 |
1 |
GREASE RELIEF FITTING |
10 |
00003500 |
1 |
GREASE FITTING |
Machete Boom 17 21 and 24 04-04 Rev 02-12
©2012 Alamo Group Inc. |
Parts Section -17 |
60 IN BLADE CARRIER ASY (BAR) - PN 02969230
ITEM |
PART NO. |
QTY. |
DESCRIPTION |
|
02969230 |
- |
BLADE BAR ASY |
1 |
00020900 |
2 |
NUT |
2 |
00023200 |
2 |
ROLL PIN |
3 |
02969234 |
4 |
FLATWASHER |
4 |
02761500 |
1 |
BLADE SET, MATCHED SET OF 2 |
5 |
02971387 |
1 |
BLADE BAR LEAF, TOP LEAF |
6 |
02969232 |
1 |
BLADE BAR LEAF, MIDDLE LEAF |
7 |
02969233 |
1 |
BLADE BAR LEAF, BOTTOM LEAF |
8 |
02969235 |
2 |
BOLT, LONG BOLT |
9 |
02969236 |
2 |
BOLT, SHORT BOLT |
10 |
02782900 |
2 |
BLADE BOLT |
11 |
02957089 |
2 |
LOCKWASHER |
12 |
00003901 |
- |
LOCKWASHER, 3/4" PL HEAVY |
13 |
02964861 |
- |
BOLT, SOCKET HEAD 3/4"-NC X 4" PL GR8 |
14 |
02984572 |
1 |
BLADE BOLTS, NUTS, ROLLPIN KIT (INCLUDES 2 EACH OF ITEMS 1, 2, & 10) |
Machete Boom 17 21 and 24 04-04 Rev 02-12
©2012 Alamo Group Inc. |
Parts Section -18 |
60 IN DOOR CYL ASY - PN 02961480A
ITEM |
PART NO. |
QTY. |
DESCRIPTION |
|
02961480A |
- |
DOOR CYLINDER ASY |
1 |
5JRC12160 |
1 |
LOCKNUT |
2 |
33309 |
1 |
PISTON |
3 |
02975865 |
1 |
ROD WLD`MT |
4 |
02975866 |
1 |
TUBE / BARRELL WLD`MT |
5 |
02975867 |
1 |
CYLINDER HEAD |
6 |
* SEAL KIT |
1 |
ROD WIPER SEAL (IN ITEM 12) |
7 |
* SEAL KIT |
1 |
ROD SEAL (IN ITEM 12) |
8 |
* SEAL KIT |
1 |
O-RING (IN ITEM 12) |
9 |
* SEAL KIT |
1 |
SEAL (IN ITEM 12) |
10 |
* SEAL KIT |
1 |
PISTON SEAL (IN ITEM 12) |
11 |
---------------- |
- |
O-RING F/ O-RING BOSS FITTING |
12 |
02975528 |
1 |
SEAL KIT (ITEMS 6 THRU 10) |
Machete Boom 17 21 and 24 04-04 Rev 02-12
©2012 Alamo Group Inc. |
Parts Section -19 |
THIS PAGE INTENTIONAL LEFT BLANK
Machete Boom 17 21 and 24 04-04 Rev 02-12
©2012 Alamo Group Inc. |
Parts Section -20 |
60 IN HEAD ASY - SN 02050 & DOWN
Machete Boom 17 21 and 24 04-04 Rev 02-12
©2012 Alamo Group Inc. |
Parts Section -21 |
60 IN HEAD ASY - SN 02050 & DOWN
Continued... |
|
|
|
ITEM |
PART NO. QTY. |
DESCRIPTION |
|
|
02968858 |
- |
ROTARY HEAD ASY, 60" W/ BAR CARRIER (NON-SALABLE) |
2 |
00011100 |
46 |
FLATWASHER |
3 |
00015800 |
24 |
LOCKNUT |
4 |
00007000 |
12 |
BOLT |
5 |
00755153 |
2 |
COTTER PIN |
6 |
02970595 |
1 |
BOLT |
8 |
NFS |
1 |
SERIAL NUMBER PLATE |
9 |
02971701 |
1 |
SLOTTED NUT |
10 |
00023100 |
11 |
BOLT |
11 |
00756875 |
1 |
FLAP HOLD DOWN BAR |
12 |
00759862 |
2 |
SHIELD, DEBRIS DEFLECTOR |
13 |
02767500 |
1 |
HEX WRENCH, SPECIAL |
14 |
02976448 |
1 |
PIN |
15 |
02885700 |
2 |
REAR FLAP |
16 |
02885800 |
1 |
REAR CLAMP BAR |
17 |
651102 |
1 |
PIN |
18 |
02960018 |
2 |
ADAPTER, ELBOW |
19 |
02961480 |
1 |
CYLINDER ASY |
20 |
02971720 |
1 |
PIN WLD`MT |
21 |
02971756 |
1 |
PIN |
22 |
02967775 |
1 |
DOOR |
23 |
02967782 |
1 |
ROD, HINGE |
24 |
02968836 |
1 |
PLASTIC TIE, YELLOW |
25 |
02968837 |
3 |
PLASTIC TIE, YELLOW / WHITE |
26 |
02968856 |
- |
ROTARY HEAD SUB-ASY, 60" (NON-SALABLE) |
27 |
02968873 |
- |
DECALS, (SEE SAFETY SECTION) |
28 |
02968874 |
1 |
HOSE, (LARGE) - W/ RED TIE - PRESSURE HOSE |
29 |
02968875 |
1 |
HOSE, (LARGE) - W/ ORANGE TIE - RETURN HOSE |
30 |
02968876 |
1 |
HOSE, (LARGE) - W/ BLUE TIE - CASE DRAIN |
31 |
02968877 |
1 |
HOSE, (SMALL) - W/ YELLOW / WHITE - DOOR CYL |
32 |
02968878 |
1 |
HOSE, (SMALL) - W/ YELLOW TIE - DOOR CYL |
33 |
02968894 |
1 |
PLASTIC TIE, RED |
34 |
02968895 |
1 |
PLASTIC TIE, BLUE |
35 |
02968896 |
1 |
PLASTIC TIE, ORANGE |
36 |
02971702 |
1 |
WASHER |
37 |
3710151 |
2 |
METAL TACK |
38 |
99338S |
1 |
ROLL PIN |
39 |
165020 |
1 |
COTTER PIN |
Machete Boom 17 21 and 24 04-04 Rev 02-12
©2012 Alamo Group Inc. |
Parts Section -22 |
60 IN HEAD ASY - SN 02051 & UP
Machete Boom 17 21 and 24 04-04 Rev 02-12
©2012 Alamo Group Inc. |
Parts Section -23 |
60 IN HEAD ASY - SN 02051 & UP
Continued... |
|
|
|
ITEM |
PART NO. QTY. |
DESCRIPTION |
|
|
02968858 |
- |
ROTARY HEAD ASY, 60" W/BAR CARRIER (NON-SALABLE) |
2 |
00011100 |
45 |
FLATWASHER |
3 |
00015800 |
23 |
LOCKNUT |
4 |
00007000 |
11 |
BOLT |
5 |
00755153 |
2 |
COTTER PIN |
6 |
02970595 |
1 |
BOLT |
8 |
02971500 |
1 |
PLATE, ALAMO S/N |
9 |
02971701 |
1 |
NUT |
10 |
00023100 |
10 |
BOLT |
11 |
00756875 |
1 |
FLAP HOLD DOWN BAR |
12 |
00759862 |
2 |
SHIELD, DEBRIS DEFLECTOR |
13 |
02767500 |
1 |
HEX WRENCH, MODIFIED |
14 |
02976448 |
1 |
PIN, 2-1/2" LONG |
15 |
02885700 |
1 |
REAR FLAP, 10" HIGH X 63" LONG |
16 |
02885800 |
1 |
REAR CLAMP BAR |
17 |
651102 |
1 |
PIN, 2" LONG |
18 |
02960018 |
2 |
ADAPTER, ELBOW |
19 |
02961480 |
1 |
CYLINDER ASY, DOOR |
20 |
02971720 |
1 |
PIN WLD`MT, 11-1/2" LONG |
21 |
02971756 |
1 |
PIN, 9" LONG |
22 |
02971963 |
1 |
DOOR WLD`MT |
23 |
02967782 |
1 |
ROD, HINGE |
24 |
02968836 |
1 |
PLASTIC TIE, YELLOW |
25 |
02968837 |
1 |
PLASTIC TIE, YELLOW & WHITE |
26 |
02968856 |
1 |
60" SQ. HD SUB-ASY. |
27 |
02968873 |
1 |
DECAL KIT |
28 |
02968874 |
1 |
HOSE, # 16 W/ RED PLASTIC TIE |
29 |
02968875 |
1 |
HOSE, # 16 W/ ORANGE PLASTIC TIE |
30 |
02968876 |
1 |
HOSE, # 16 W/ BLUE PLASTIC TIE |
31 |
02968877 |
1 |
HOSE, # 4 W/ YELLOW & WHITE PLASTIC TIE |
32 |
02968878 |
1 |
HOSE, # 4 W/ YELLOW PLASTIC TIE |
33 |
02968894 |
1 |
PLASTIC TIE, RED |
34 |
02968895 |
1 |
PLASTIC TIE, BLUE |
35 |
02968896 |
1 |
PLASTIC TIE, ORANGE |
36 |
02971702 |
1 |
WASHER, NARROW |
37 |
3710151 |
2 |
METAL TACK |
38 |
99338S |
2 |
ROLL PIN |
39 |
00010600 |
2 |
BOLT |
48 |
165020 |
1 |
COTTER PIN |
Machete Boom 17 21 and 24 04-04 Rev 02-12
©2012 Alamo Group Inc. |
Parts Section -24 |
60 IN HEAD SUB-ASY - SN 02050 & DOWN
Machete Boom 17 21 and 24 04-04 Rev 02-12
©2012 Alamo Group Inc. |
Parts Section -25 |
60 IN HEAD SUB-ASY - SN 02050 & DOWN
Continued... |
|
|
|
ITEM |
PART NO. QTY. |
DESCRIPTION |
|
|
02968858 |
- |
ROTARY HEAD SUB-ASY, 60" (NON-SALABLE) |
1 |
00003901 |
4 |
LOCKWASHER |
2 |
00015800 |
14 |
LOCKNUT |
3 |
00037200 |
16 |
LOCKNUT |
4 |
00059700 |
14 |
BOLT |
5 |
02979020 |
8 |
NUT |
6 |
03200269 |
8 |
BOLT |
7 |
02969230 |
1 |
BLADE BAR ASY |
8 |
02963645 |
8 |
BOLT |
9 |
02966899 |
2 |
SKID SHOE |
10 |
02966900 |
1 |
DECK HEAD |
11 |
02971928 |
1 |
HITCH POST |
13 |
02964861 |
4 |
BOLT, SOCKET HEAD |
14 |
5312316 |
16 |
FLATWASHER, HARDENED SPECIAL |
15 |
15B600 |
14 |
WASHER |
16 |
W67 |
16 |
WASHER |
17 |
00019600 |
4 |
LOCKWASHER |
18 |
00750316 |
2 |
HYDRAULIC FITTING, ELBOW |
19 |
00750317 |
2 |
SPLIT FLANGE KIT |
20 |
02891800 |
4 |
HYDRAULIC FITTING, ELBOW |
21 |
02958782 |
1 |
ADAPTER, HYD, STRAIGHT |
22 |
02961038 |
1 |
GASKET, SPINDLE / MOTOR |
23 |
02967193B |
1 |
MOTOR ASY |
24 |
02968859A |
1 |
SPINDLE HOUSING |
25 |
02978878 |
1 |
MOTOR PLATE |
26 |
02970752 |
4 |
TIE ROD |
29 |
02979021 |
16 |
NUT |
31 |
02972094 |
1 |
SEAL KIT, VALVE BLOCK TO MOTOR |
32 |
02971574 |
1 |
CARTRIDGE, RELIEF (4000 PSI) |
32A |
02981685 |
1 |
O-RING |
32B |
02981686 |
1 |
O-RING |
32C |
02981687 |
1 |
O-RING |
32D |
02981688 |
2 |
BACK-UP RING |
33 |
02979511 |
1 |
GASKET, END COVER |
34 |
02977905 |
1 |
MOTOR SEAL KIT |
Machete Boom 17 21 and 24 04-04 Rev 02-12
©2012 Alamo Group Inc. |
Parts Section -26 |
60 IN HEAD SUB-ASY - SN 02051 & UP
Machete Boom 17 21 and 24 04-04 Rev 02-12
©2012 Alamo Group Inc. |
Parts Section -27 |