AKG STS DAM+ Specifications

STS DAM+
Professional Tabletop Stand for use with DAM+ modules and derivates
For all kind of meetings – from houses of worship to court rooms
Heavy Duty Firm fit and shock absorbing
Elegant black matte design and 30cm slim line gooseneck
Discreet look
High quality connector
Long lasting and secure contacts – well EMC protected
Programmable Functions
push to talk, push to mute, push on/off, low cut on/off
LED status indication on gooseneck
Displaying status of set
www.akg.com
KEY SPECIFICATIONS
60 to 22,000 Hz
136 dB (for 1% THD)
<30 dB-A
>64 dB
<=600 ohms
>=2,000 ohms
9 to 52 V phantom power to IEC 61938 (DPA adapter integrated)
<3 mA
3-pin male XLR and DMA+ 4 Pin
matte black
3
550
Frequency range
Max. SPL
Equivalent noise level
Signal/noise ratio (A-weighted)
Impedance
Recommended load impedance
Supply voltage
Powering
Connector
Finish
Gross weight (in gram)
Net weight (in gram)
Dimensions (in cm) length
Dimensions (in cm) width
Dimensions (in cm) heigth
Box dimensions (in cm) length
Box dimensions (in cm) width
Box dimensions (in cm) heigth
Box volume (in cm
)
950 900 13,5 9 4 10 5 11
Item Number: 2966H00030
COMPATIBLE MICROPHONES
AKG Acoustics GmbH Lemböckgasse 21–25, 1230 Vienna, AUSTRIA
© 2013 HARMAN International Industries, Incorporated. All rights reserved. AKG is a trademark of AKG Acoustics GmbH, registered in the United States and/or other countries. Features, specifications and appearance are subject to change without notice.
www.akg.com
AKG Acoustics, U.S. 8400 Balboa Boulevard, Northridge, CA 91329, U.S.A.
Loading...