Akai HV1 Operator's Manual
HARMONY PROCESSING UNIT
WARNING!!
To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
CAUTION
RISK OF ELECTRIC SHOC K
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
THE SYMBOLS ARE RULED BY UL STANDARDS (U.S.A.)
The lightning flash with arrowhead symbol , within an equilateral triangle, is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product’s enclosure; that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intented to alert the user
to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
06/24/2002 Rev. 4
1-En
5B-En
Duo Buddy HV1
vii
WARNING
WARNING
The HV1 is designed to be used in a standard household environment.
Power requirements for electrical equipment vary from area to area. Please ensure that your AC
Adaptor supplied meets the power requirements in your area. If in doubt, consult a qualified
electrician or AKAI professional dealer.
120 VAC @ 60 Hz for USA and Canada
220~230 VAC @ 50 Hz for Europe
PROTECTING YOURSELF AND THE HV1
• Never touch the AC Adaptor with wet hands.
• Always disconnect the AC Adaptor from the power supply by pulling on the adaptor/plug,
not the cord.
• Allow only an AKAI professional dealer or qualified professional engineer to repair or
reassemble the HV1. Apart from voiding the warranty, unauthorized engineers might touch
live internal parts and receive a serious electrical shock.
• Do not put, or allow anyone to put any object, especially metal objects, into the HV1.
• Use only a household AC power supply. Never use a DC power supply.
• If water or any other liquid is spilled into or onto the HV1, disconnect the power, and call your
dealer.
• Make sure that the unit is well-ventilated, and away from direct sunlight.
• To avoid damage to internal circuitry, as well as the external finish, keep the HV1 away from
sources of direct heat (stoves, radiators, etc.).
• Avoid using aerosol insecticides, etc. near the HV1. They may damage the surface, and may
ignite.
• Do not use denaturated alcohol, thinner or similar chemicals to clean the HV1. They will
damage the finish.
• Modification of this equipment is dangerous, and can result in the functions of the HV1 being
impaired. Never attempt to modify the equipment in any way.
• Make sure that the HV1 is always well-supported when in use on a firm level surface.
• In order to assure optimum performance of your HV1, select the setup location carefully, and
make sure the equipment is used properly. Avoid setting up the HV1 in the following
locations:
1. In a humid or dusty environment
2. In a room with poor ventilation
3. On a surface which is not horizontal
4. Inside a vehicle such as a car, where it will be subject to vibration
5. In an extremely hot or cold environment
Duo Buddy HV1
i
WARNING
CAUTION (Only for the product sold in Canada and U.S.A.)
To prevent electric shock, do not use this polarized AC power plug with an extension cord,
receptacle, or other outlet unless the blades can be fully inserted to prevent blade exposure.
ATTENTION
Afin d’éviter tout risque de décharge électrique, n’ utilisez pas cette prise polarisée avec une
rallonge, une prise de courant ou autre sortie á moins que les lames puissent être complétement
insérées et qu’elles ne soient plus visibles.
IMPORTANT (for U.K. customers only)
This equipment is fitted with an approved converter plug.
To change the fuse in this type of plug proceed as follows:
1) Remove the fuse cover and old fuse.
2) Fit a new fuse which should be a BS1362 5 Amp A.S.T.A. or BSI approved type.
3) Refit the fuse cover.
If the AC mains plug fitted to the lead supplied with this equipment is not suitable for your type of
AC outlet sockets, it should be changed to an AC mains lead, complete with moulded plug of the
appropriate type.
If this is not possible, the plug should be cut off and a correct one fitted to suit the AC outlet. This
should be fused at 5 Amps.
If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp.
PLEASE NOTE: THE SEVERED PLUG MUST BE DESTROYED TO AVOID A POSSIBLE
The wires in this mains lead are coloured in accordance with the following code:
As the colours of the wires in the mains lead of this apparatus may not correspond with the
coloured markings identifying the terminals in your plug, please proceed as follows:
The wire which is coloured BLUE must be connected to the terminal which is marked with the
letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal which is marked with
the letter L or coloured RED.
DO NOT CONNECT ANY WIRE TO THE PIN MARKED E OR
OR YELLOW & GREEN WHEN WIRING THE PLUG.
Ensure that all the terminals are securely tightened and no loose strands of wire exist.
Before replacing the plug cover, make certain the cord grip is clamped over the outer sheath of
the lead and not simply over the wires.
SHOCK HAZARD SHOULD IT BE INSERTED INTO A 13 AMP SOCKET
ELSEWHERE.
BLUE —NEUTRAL
BROWN—LIVE
OR COLOURED GREEN
14-En
14-F
6F-En
ii
Duo Buddy HV1
WARNING
CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER
FOR COMPLIANCE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
32-En
FCC WARNING
This equipment has been tested and found to comply with the limits for a Class B digital device
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
21B-En
AVIS POUR LES ACHETEURS CANADIENS DU HV1
Le présent appareil numérique n’ément pas de bruits radioélectriques dépassant les limites
applicables aux appareils numériques de la Class B prescrites dans le Règlement sur le brouillage
radioélectrique édicté par le ministère des Communications du Canada.
27-F
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital
apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.
27-En
This appliance is not equipped with a main power switch. Even when the appliance is turned off,
the power supply to the appliance is not completely turned off when the power cord is plugged in.
Pull out the adaptor when not using the appliance for long periods.
4-En
Copyright Notice
The AKAI professional HV1 is a computer-based instrument and uses software contained in ROM.
Software that is provided with the instrument, including information contained in this manual, is
copyrighted by applicable laws. You can use that software or information concerning the instrument
only for personal use. You are strictly prohibited to copy or modify any part of the software or manual
without written permission from AKAI professional M.I. Corp., Yokohama, Japan.
Duo Buddy HV1
iii
WARRANTY
WARRANTY
AKAI professional M.I. Corp. warrants its products, when purchased from an authorized “AKAI
professional” dealer, to be free from defects in materials and workmanship for a period of 12
(twelve) months from the date of purchase. Warranty service is effective and available to the
original purchase only, and only on completion and return of the AKAI professional Warranty
Registration Card within 14 days of purchase.
Warranty coverage is valid for factory-authorized updates to AKAI professional instruments and
their software, when their installation is performed by an authorized AKAI professional Service
Center, and a properly completed Warranty Registration has been returned to your “AKAI
professional” dealer.
To obtain service under this warranty, the product must, on discovery of the defect, be properly
packed and shipped to the nearest AKAI professional Service Center. The party requesting
warranty service must provide proof of original ownership and date of purchase of the product.
If the warranty is valid, AKAI professional will, without charge for parts or labor, either repair
or replace the defective part(s). Without a valid warranty, the entire cost of the repair (parts and
labor) is the responsibility of the product's owner.
AKAI professional warrants that it will make all necessary adjustments, repairs and replacements
at no cost to the original owner within 12 (twelve) months of the purchase date if:
1) The product fails to perform its specified functions due to failure of one or more of its
components.
2) The product fails to perform its specified functions due to defects in workmanship.
3) The product has been maintained and operated by the owner in strict accordance with the
written instructions for proper maintenance and use as specified in this Operator's Manual.
Before purchase and use, owners should determine the suitability of the product for their intended
use, and owner assumes all risk and liability whatsoever in connection therewith. AKAI
professional shall not be liable for any injury, loss or damage, direct or consequential, arising out
of use, or inability to use the product.
The warranty provides only those benefits specified, and does not cover defects or repairs needed
as a result of acts beyond the control of AKAI professional, including but not limited to:
1) Damage caused by abuse, accident, negligence.
2) Damage caused by any tampering, alteration or modification of the product: operating
software, mechanical or electronic components.
3) Damage caused by failure to maintain and operate the product in strict accordance with the
written instructions for proper maintenance and use as specified in this Operator's Manual.
4) Damage caused by repairs or attempted repairs by unauthorized persons.
5) Damage caused by fire, smoke, falling objects, water or other liquids, or natural events such
as rain, floods, earthquakes, lightning, tornadoes, storms, etc.
6) Damage caused by operation on improper voltages.
IMPORTANT NOTE: This warranty becomes void if the product or its software is electroni-
cally modified, altered or tampered with in any way.
iv
Duo Buddy HV1
WARRANTY
AKAI professional shall not be liable for costs involved in packing or preparing the product for
shipping, with regard to time, labor, or materials, shipping or freight costs, or time or expense
involved in transporting the product to and from AKAI professional Authorized Service Center
or Authorized Dealer.
AKAI professional will not cover under warranty an apparent malfunction that is determined to
be user error, or owner's inability to use the product.
THE DURATION OF ANY OTHER WARRANTIES, WHETHER IMPLIED OR EXPRESS,
INCLUDING BUT NOT LIMITED TO THE IMPLIED CONDITION OF MERCHANTABILITY, IS LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN.
AKAI professional hereby excludes incidental or consequential damages, including but not
limited to:
1) Loss of time.
2) Inconvenience
3) Delay in performance of the Warranty.
4) The loss of use of the product.
5) Commercial loss.
6) Breach of any express or implied warranty, including the Implied Warranty of Merchantability, applicable to this product.
Duo Buddy HV1
v
Loading...