A.J. Antunes & Co SCT II 8601200070 User Manual
A. J. ANTUNES & CO. www.ajantunes.com 180 Kehoe Blvd., Carol Stream, Illinois 60188
(
p
)
Width
.09”
(2 mm)
3.25”
(83 mm)
.68
(17 mm)
1.39”
(35 mm)
1.81”
(46 mm)
4.60”
(117 mm)
Unit Identification Label
1.44”
(37 mm)
Width
Depth
1.81”
(46 mm)
4.60”
(117 mm)
Unit Identification Label
Width
SCT II Installation Information
IMPORTANT
Please read these instructions carefully to assure
correct installation. This equipment must be
installed by a licensed electrician. Prior to being
put into operation, check all wiring and function of
the unit.
Specifications
Input: Time programmable from the front of the unit
Power: 12 VAC +/-10% @ .25 Amp., 50/60 Hz.
Control: On/Off
Output: 3 Amp. Relay or 6-14VDC @ 30MA
Ambient Operating Temp: -30°F to 140°F (-22°C to 60°C)
Connections: Quick disconnects or wire leads
Shipping Weight: 1 lb. (.45 kg)
Programming Features
99:59 Minutes/Seconds or Hours/Minutes
Countdown programming in minutes and seconds
Recall program time while counting down
Flashing LED Alarm at end of time cycle indication
Dimensions
Unit Identification Label
4.60”
Height
(117 mm)
3.25”
(83 mm)
.68
(17 mm)
1.39”
(35 mm)
1.81”
(46 mm)
4.60”
(117 mm)
Label
NOTE: Dimensions are for reference only.
Wiring Diagram
1.44”
(37 mm)
Depth
.09”
(2 mm)
Relay Controls
N.C.
COM
N.O.
Relay Not Energized
Contacts COM and
NC Closed
N.C.
COM
N.O.
Relay Energized
Contacts COM and
NC Closed
1-630-784-1000 Fax: 630-784-1651 Page 1 of 2 P/N 1011099 06/10
1-800-253-2991
tional
O
Earth Ground
Power
A. J. ANTUNES & CO. www.ajantunes.com 180 Kehoe Blvd., Carol Stream, Illinois 60188
SCT II Installation Information
Warranty
1. Antunes Controls products are guaranteed to be free
from mechanical and electrical defects for a period of
one year from date of shipment under normal use and
service provided installation is made in accordance
with manufacturers’ recommendations.
2. Parts deemed defective shall be repaired or replaced
at manufacturers option and at manufacturers expense
but shall not include foreign or federal excise taxes,
state or municipal sale or use taxes, all such taxes
not limited to the foregoing being responsibility of the
purchaser.
3. No charge for travel and/or mileage will be allowed to
purchaser.
4. Antunes Controls reserves the right to make changes
in design or make any improvements on any products.
The right is always reserved to modify our equipment
because of new technology, underwriter’s requirements
and/or government regulations.
Limitation of Liability: If it is understood and agreed
that seller’s liability whether in contract, in tort, under
any warranty, in negligence or otherwise, shall not
exceed the return of the amount of the purchase price
paid by purchaser and under no circumstances shall
seller be liable for special, indirect or consequential
damages. The price stated for the equipment is a
consideration in limiting seller’s liability. No action,
regardless of form, arising out of the transactions may
be brought by purchaser more than one year after the
cause of action has accrued.
5. The following are not covered under warranty:
a. Failure from neglect, abuse, careless handling and
mis-application of unit.
b. Failure to observe guidelines for installation or
improper voltage hook-up.
c. Failure caused by improper maintenance.
d. Unless specifically allowed by Antunes Controls, no
other charges may be included under warranty.
A.J. Antunes & Co.
Headquarters/Manufacturing
180 Kehoe Boulevard
Carol Stream, Illinois 60188 USA
Phone (630) 784-1000
Toll Free (800) 253-2991
Fax: (630) 784-1650
Antunes Equipment
Manufacturing (Suzhou) Ltd.,
9 Hou Ju Road, Building #24,
S&T Park, SND
Suzhou, Jiangsu, China 215011
Phone: 86-512-6841-3637
Fax: 86-512-6841-3907
www.ajantunes.com
1-630-784-1000 Fax: 630-784-1651 Page 2 of 2 P/N 1011099 06/10
1-800-253-2991
Loading...