AJA HI5 Specifications

Hi5

The Hi5 converts SDI or HD-SDI to HDMI for driving HDMI monitors. Embedded SD/HD-SDI audio is
supported in the HDMI output allowing a convenient single cable audio/video connection. The Hi5
provides 2-Channel RCA style audio outputs for separate audio monitoring if needed. The Hi5 also
provides a looping SD/HD-SDI output useful for connecting additional equipment, or for "daisy
chaining" multiple monitors to the same SD-HD-SDI source.

https://www.aja.com/products/hi5

Video Formats

• (HD) 1080i 50, 59.94, 60

• (HD) 1080p 23.98, 24, 25, 29.97, 30

• (HD) 720p 50, 59.94, 60

• (SD) 625i, 525i

Size (w x d x h)

• 4.6" x 2.4" x 1" (117mm x 61mm x 25mm)

Power

• +5VDC Regulated, 3 Watts, power supply required, included with purchase

Input

Environment

• SMPTE-259/274/292/296 SD/HD-SDI, 1 x BNC

Outputs

• HDMI with embedded audio, 24-bit (selectable by internal jumper: 2 or 8­Channels)

• Audio, 2-Channel RCA style outputs at -10dBu (nominal), Channel 1 and 2

• 1 Looping SD/HD-SDI output of the SDI input (75 ohm, unterminated)

• Safe Operating Temperature: 0 to 40 degrees C (32 to 104 degrees F)

• Safe Storage Temperature (Power OFF): -40 to 60 degrees C (-40 to 140
degrees F)

• Operating Relative Humidity: 10-90% noncondensing

• Operating Altitude: <3,000 meters (<10,000 feet)

$345 US MSRP

HDMI

• Standard Type A connector

• Video:

• 8-bit RGB 4:4:4 or 10-bit YCbCr 4:2:2 (selectable by internal jumper)

• Audio:

• 24-bit, with 2 or 8 embedded channels (selectable by internal jumper)

HDCP

• The Hi5 does not encode the HDMI output with HDCP encryption. By
definition, SD/HD-SDI inputs to the Hi5 are unencrypted. The HDMI
specification requires HDMI monitors to support unencrypted inputs.

Hi5 - Spec Sheet

08/13/2019 Page 1 of 1