Video Formats
HDMI v1.3 30-bits/pixel, RGB or YUV, 2.25 Gbps, SD, HD, 1080p 50/60
(2K) 2048 x 1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
(HD) 1920 x 1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
(HD) 1920 x 1080PsF 23.98, 24, 25, 29.97, 30
(HD) 1920 x 1080i 25, 29.97, 30
(HD) 1280 x 720p 50, 59.94, 60
(SD) 625i 50
(SD) 525i 59.94
Input Possible Output Formats
525i59.94 525i59.94 720p59.94 1080i59.94
720p59.94 525i59.94 720p59.94 1080i59.94
1080i59.94 525i59.94 720p59.94 1080i59.94
1080pSF23.98 1080pSF23.98 1080i59.94 525i59.94
625i50 625i50 1080i50 720p50
720p50 625i50 1080i50 720p50
1080i50 625i50 1080i50 720p50
1080pSF24 1080pSF24 1080i60
1080i60 1080i60 720p60
720p60 720p60 1080i60
Notes:
In the case of 1080PsF 23.98 input - and when 1080i 59.94 (or 525i) is
selected as an output format, the FS2 automatically does 3:2 pulldown
to get the correct frame rate. Similarly, in the case of 1080pSF/24 input,
FS2 automatically does 3:2 pulldown to get the correct frame rate.
When passing 24 or 60 frame rate video, output is high definition.
Video Input Digital
Dual 3G-SDI, SMPTE-259/292/424, 8 or 10-bits
Dual Fiber 3G-SDI, SMPTE-297, 8 or 10-bits (optional)
Dual Channel LC connector module
Single Channel LC connector module
Single Channel SC connector module
Single Link 4:2:2 (1x BNC each)
HDMI v1.3 30-bits/pixel, RGB or YUV, 2.25 Gbps, SD, HD, 1080p 50/6060
Video Output Analog
HD component YPbPr, SMPTE-274 (3x BNC)
12-bit D/A, 2x oversampling
SD Component (3x BNC)
SMPTE/EBU N10, Betacam 525 line, Betacam 525J
12-bit D/A, 4x oversampling
+/- .25 dB to 5.5 mHz Y frequency response
+/- .25 dB to 2.5 mHz C frequency response
.5% 2T pulse response
<2 ns Y/C delay inequity
SD Composite
12-bit D/A, 4x oversampling
Audio Input Digital
16-Channel, 24-bit SMPTE-272/299 SDI embedded audio, 48 kHz
sample rate, synchronous
16-Channel, 24-bit AES/EBU audio, 48 kHz sample rate, synchronous or
nonsynchronous, internal sample rate conversion (8x XLR via 25-pin
breakout cable)
Audio Input Analog
8-Channel, 24-bit A/D analog audio, 48 kHz sample rate, balanced (8x
XLR via 25-pin breakout cable)
+12 dBu, +15 dBu, +18 dBu, +24 dBu (Full Scale Digital)
+/- 0.2 dB 20 to 20 kHz frequency response
Audio Output Digital
16-Channel, 24-bit SMPTE-272/299 SDI embedded audio, 48 kHz
sample rate, synchronous
16-Channel, 24-bit AES/EBU audio, 48 kHz sample rate, synchronous or
nonsynchronous, internal sample rate conversion (8x XLR via 25-pin
breakout cable)
Audio Output Analog
8-Channel, 24-bit A/D analog audio, 48 kHz sample rate, balanced (8x
XLR via 25-pin breakout cable)
+12 dBu, +15 dBu, +18 dBu, +24 dBu (Full Scale Digital)
+/- 0.2 dB 20 to 20 kHz frequency response
Video Input Analog
HD component YPbPr, SMPTE-274 (3x BNC)
12-bit A/D, 2x oversampling
SD Component (3x BNC)
SMPTE/EBU N10, Betacam 525 line, Betacam 525J
12-bit A/D, 4 x oversampling
+/- .25 dB to 5.5 MHz Y frequency response
+/- .25 dB to 2.5 MHz C frequency response
.5% 2T pulse response
<2 ns Y/C delay inequity
SD Composite
12-bit A/D, 4x oversampling
Video Output Digital
Dual SD/HD/3G SDI, SMPTE-259/292/424, 8 or 10-bits
Dual Fiber 3G-SDI, SMPTE-297, 8 or 10-bits (optional)
Dual Channel LC connector modules
Single Channel LC connector module
Single Channel SC connector module
Single Link 4:2:2 (1x BNC each)
FS2 - Spec Sheet
Up-Conversion
Hardware: 10-bit
Anamorphic: fullscreen
Pillarbox 4:3: results in a 4:3 image in center of screen with black
sidebars
Zoom 14:9: results in a 4:3 image zoomed slightly to fill a 14:9 image
with black side bars
Zoom Letterbox: results in image zoomed to fill fullscreen
Zoom Wide: results in a combination of zoom and horizontal stretch to
fill a 16:9 screen; this setting can introduce a small aspect ratio change
Down-Conversion
Hardware: 10-bit
Anamorphic: fullscreen
Letterbox: image is reduced with black top and bottom added to
image area with the aspect ratio preserved
Crop: image is cropped to fit new screen size
Cross-Conversion
08/19/2019 Page 2 of 3