AJA FS1-R1 Specifications
AJA FS1
Specifications
Specification Value Notes
Return loss: 5Mhz to 1.5GHz >18db
Equalization (Belden 1694 cable): 270MHz 350m
1.5GHz 140m
www.aja.com
SDI Input
Standard SMPTE 259M, 292M
Connector 75 ohm BNC
SDI Output
Standard SMPTE 259M, 292M
Connector 75 ohm BNC
Return loss: 5Mhz to 1.5GHz >18db
Return loss: 1.5GHz to 3GHz >18db
Timing jitter: 270MHz <0.1 UI Genlock = freerun, Color Bars
1.5GHz <0.5 UI "
Alignment jitter: 270MHz <0.1 UI "
1.5GHz <0.13 UI "
Component Input
Format SMPTE, Betacam
Connector 75 ohm BNC
Return loss >40 dB, 300 kHz to 6 MHz
Quantization 12 bits
Frequency response SD Y: ±0.2 dB to 5 MHz
Pb/Pr: ±0.2 dB to 2 MHz
Frequency response HD Y: ±0.5 dB to 25 Mhz, -2.0 dB @ 30 Mhz
Pb/Pr: ±0.2 dB to 12.5 Mhz, -1.0 dB @ 15
Mhz
Because it matters.
Revised 6/4/2010
AJA FS1
Specifications
Specification Value Notes
Component Output
Connector 75 ohm BNC
Return loss >40 dB 300 kHz to 6 MHz
Quantization 12 bits
Frequency response SD Y: ±0.2 dB to 5 MHz
Frequency response HD Y: ±0.25 dB to 25 Mhz, -3 dB @ 30 Mhz
www.aja.com
SNR >65 dB Flat field, gray
Format SMPTE, Betacam, RGB
Pb/Pr: ±0.5 dB to 2.5 MHz
Pb/Pr ±0.25 to 12.5 Mhz, -3 dB @ 15 Mhz
SNR >65 dB Flat field, gray
Composite/S Video Input
Standard NTSC, PAL
Connector 75 ohm BNC, S Connector
Return loss >40 dB 300 kHz to 6 MHz
Quantization 12 bits
Frequency response ±0.5 dB, to 5 MHz, Luminance
SNR 65 dB
Composite/S Video Output
Standard NTSC, PAL
Connector 75 ohm BNC, S Connector
Return loss >40 dB 300 kHz to 6 MHz
Quantization 12 bits
Frequency response ±0.1 dB to 6 MHz, Luminance
DC offset <0.0 ± 50mV
Differential gain <0.5%
Differential phase <0.5°
Transient response < 0.9% K Factor
SNR >65 dB
Because it matters.
Page: 2
Loading...