Color reception systemsPAL-M/PAL-N/NTSC with automatic or manual selection
Channel reception (181 channels)VHF=channels from 2 to 13
UHF=channels from 14 to 69
CATV=channels from 1 to 125
Cinescope29 inches
Visible diagonal67.9 cm
Electrical Power (FREE VOLTAGE) 95 to 245V AC-50/60Hz
Consumption140 Watts
Acoustical power7 Watts RMS per channel
Weight34 kg
Dimensions (W x H x D)670 x 610 x 520 mm
Design and specifications are subject to change without notice.
S/M Code No. 09-001-338-2N1
DATA
NOTICES BEFORE REPAIRING
To make the best use of this equipment, make sure to
obey the following items when repairing (or mending).
1. Do not damage or melt the tunicate of the leading
wire on the AC1 side, including the power supply
cord.
2. Do not soil or stain the letters on the spec.
inscription plates, notice labels, fuse labels, etc.
3. When repairing the part extracted from the
conducted side of the board pattern, fix it firmly
with applying bond to the pattern and the part.
4. Restore the following items after repairing.
1) Conditions of soldering of the wires (especially,
the distance on the AC1 side).
2) Conditions of wiring, bundling of wires, etc.
3) Types of the wries.
4) Attachment conditions of all types of the insulation.
5. After repairing, always measure the insulation
resistance and perform the voltage-withstand test
(See Fig-1).
1) The insulation resistance must be 7.0 to 9.5 MΩ
when applying
2) In the voltage withstand test, apply 3.6 KV for 3
seconds and check that the GO lamp lights.
500V per second.
Insulation resistance: 7.0 to 9.5 MΩ (500 V/s)
Voltage-withstand: 3.6 KV for 3 or more seconds
Safety checker (Model 7110, etc.)
Earth cable
AC cable
Fig-1
Connect the earth cable
to the outside metal part
terminal.
*Breaking current set to 10 mA.
*Connect the safety checker as shown in Fig-1,
then measure the resistance and perform the test.
* Do not touch the equipment during testing.
*For details of the safety checker, refer to the supplied
Operation manual.
When servicing and checking on the TV, note the followings.
1. Keep the notices
As for the places which need special attentions, they
are indicated with the labels or seals on the cabinet,
chassis and parts. Make sure to keep the indications
and notices in the operation manual.
2. Avoid an electric shock.
There is a high voltage part inside. Avoid an electric
shock while the electric current is flowing.
3. Use the designated parts.
The parts in this equipment have the specific
characters of incombustibility and withstand voltage
for safety.
Therefore, the part which is replaced should be used
the part which has the same character. Especially as
to the important parts for safety which is indicated in
the circuit diagram or the table of parts as a mark,
the designated parts must be used.
4. Put parts and wires in the original position after
assembling or wiring.
There are parts which use the insulation material
such as a tube or tape for safety, or which are
assembled so that these parts do not contact with
the printed board. The inside wiring is designed not
!
to get closer to the pyrogenic parts and high voltage
parts. Therefore, put these parts in the original
positions.
5. Take care of the cathode-ray tube.
By setting an explosion-proof cathode-ray tube is set
in this equipment, safety is secured against
implosion.
However, when removing it or serving from
backward, it is dangerous to give a shock. Take
enough care to deal with it.
6. Avoid an X-ray.
Safety is secured against an X-ray by considering
about the cathode-ray tube and the high voltage
peripheral circuit, etc. Therefore, when repairing the
high voltage peripheral circuit, use the designated
parts and do not change the circuit. Repairing
except indicates causes rising of high voltage, and
the cathode-ray tube emits an X-ray.
7. Perform a safety check after servicing.
Confirm that the screws, parts and wiring which were
removed in order to service are put in the original
positions, or whether there are the portions which are
deteriorated around the places serviced.
2
ELECTRICAL MAIN PARTS LIST
REF. NOPART NO.KANRIDESCRIPTION
C1-027-218-501 CJT.PCI MAN/MONT PRINCIPAL
C1-027-218-511 CJT.PCI IA PRINCIPAL MONT
C1-027-218-521 CJT.PCI INS.SMD TV-AR295
C1-107-218-501 PCI PRINCIPAL
RESISTOR/FUSISTOR
R204 C1-183-533-192 RES.METAL.FILME 1/2W 330R 5% N
R205 C1-183-510-092 RES.METAL FILME 1/2W 10R 5% N
R211 C1-183-510-092 RES.METAL FILME 1/2W 10R 5% N
R225 C1-183-510-092 RES.METAL FILME 1/2W 10R 5% N
R301 C1-183-515-092 RES.METAL FILME 1/2W 15R 5% N
R303 C1-185-533-140 RES.METAL FILME 1W 330R 5% N
R304 C1-185-582-840 RES.METAL FILME 1W 0,82R 5% N
R307 C1-185-518-940 RES.METAL FILME 1W 1,8R 5% N
R403 C1-183-522-192 RES.METAL FILME 1/2W 220R 5% N
R405 C1-183-556-292 RES.METAL FILME 1/2W 5,6K 5% N
R406 C1-184-510-215 FUSISTOR 2W 1K 5%
R407 C1-185-515-340 RES.METAL FILME 1W 15K 5% N
R412 C1-183-522-497 RES.M.GLAZ.FILM 1/2W 220K 5% N
R416 C1-183-582-192 RES.METAL FILME 1/2W 820R 5% N
R419 C1-185-510-914 FUSISTOR 1W 1R 5% N
R421 C1-185-510-914 FUSISTOR 1W 1R 5% N
R422 C1-185-522-015 FUSISTOR 1W 22R 5%
R423 C1-185-510-240 RES.M.FILME 1W 1K 5% N
R424 C1-185-568-340 RES.METAL FILME 1W 68K 5% N
R430 C1-183-582-192 RES.METAL FILME 1/2W 820R 5% N
R431 C1-185-510-914 FUSISTOR 1W 1R 5% N
R439 C1-183-533-092 RES.METAL FILME 1/2W 33R 5% N
R503 C1-183-510-292 RES.METAL FILME 1/2W 1K 5% N
R504 C1-183-510-192 RES.METAL FILME 1/2W 100R 5% N
R505 C1-183-510-192 RES.METAL FILME 1/2W 100R 5% N
R506 C1-183-510-192 RES.METAL FILME 1/2W 100R 5% N
R618 C1-183-547-992 RES.METAL FILME 1/2W 4,7R 5% N
R619 C1-183-547-992 RES.METAL FILME 1/2W 4,7R 5% N
R620 C1-183-510-292 RES.METAL FILME 1/2W 1K 5% N
R658 C1-183-522-092 RES.METAL FILME 1/2W 22R 5% N
R805 C1-183-510-392 RES.METAL.FILME 1/2W 10K 5% N
R807 C1-183-522-015 RES.FUS.NAO INFL.1/2W 22R 5% N
R808 C1-183-547-292 RES.METAL FILME 1/2W 4,7K 5% N
R811 C1-184-527-340 RES.METAL FILME 2W 27K 5% N
R813 C1-182-522-214 RES.FUS.NAO INFL.1/4W 2,2K 5%
R814 C1-187-533-840 RES.METAL FILME 3W 0,33R 5% N
R816 C1-183-547-292 RES.METAL FILME 1/2W 4,7K 5% N
R817 C1-189-124-931 RES.PRECISAO 0,6W 2,49K 0,5%
R818 C1-174-051-025 RES.FIO 5W 1K 5% V-SQM
R819 C1-187-522-340 RES.METAL FILME 3W 22K 5% N
R820 C1-189-112-731 RES.PRECISAO 0,6W 127K 0,5%
NO.
R821 C1-187-522-015 FUSISTOR 3W 22R 5%
R822 C1-185-547-140 RES.METAL FILME 1W 470R 5% N
R823 C1-183-547-292 RES.METAL FILME 1/2W 4,7K 5% N
R824 C1-183-668-519 RES.COMPOS.1/2W 6,8M K
R828 C1-187-515-240 RES.METAL FILME 3W 1,5K 5% N
R830 C1-185-510-914 FUSISTOR 1W 1R 5% N
R833 C1-183-522-015 RES.FUS.NAO INFL.1/2W 22R 5% N
R834 C1-183-510-192 RES.METAL FILME 1/2W 100R 5% N
R835 C1-187-515-240 RES.METAL FILME 3W 1,5K 5% N
R836 C1-183-547-292 RES.METAL FILME 1/2W 4,7K 5% N
R840 C1-183-547-292 RES.METAL FILME 1/2W 4,7K 5% N
R841 C1-183-582-092 RES.METAL FILME 1/2W 82R 5% N
R843 C1-183-568-992 RES.METAL FILME 1/2W 6,8R 5% N
R844 C1-184-510-040 RES.METAL FILME 2W 10R 5% N
R845 C1-187-533-840 RES.METAL FILME 3W 0,33R 5% N
R846 C1-183-515-092 RES.METAL FILME 1/2W 15R 5% N
R848 C1-183-522-992 RES.METAL FILME 1/2W 2,2R 5% N
R853 C1-183-522-092 RES.METAL FILME 1/2W 22R 5% N
R854 C1-183-515-092 RES.METAL FILME 1/2W 15R 5% N
R856 C1-183-515-092 RES.METAL FILME 1/2W 15R 5% N
R857 C1-183-515-092 RES.METAL FILME 1/2W 15R 5% N
R858 C1-183-515-092 RES.METAL FILME 1/2W 15R 5% N
R859 C1-183-522-092 RES.METAL FILME 1/2W 22R 5% N
R901 C1-185-522-015 FUSISTOR 1W 22R 5%
X500 C1-425-009-200 CRISTAL NTSC 3.579545 SE / S
X501 C1-425-009-300 CRISTAL PAL-N 3.582056 SSP / S
X502 C1-425-009-100 CRISTAL PAL-M 3.575611 SSP / S
X600 C1-421-506-100 RESSONADOR CERAMICO CSB-503F58
X700 C1-425-008-100 CRISTAL 12,0000 MHZ
CHAVE
SW701 C1-449-008-400 BLOCO CHAVES DE TOQUE C/7UNID
SW702 C1-440-505-900 CHAVE SERVICO
SW801 C1-440-090-058 CHAVE POWER
DIODO LED
LD701 C1-459-521-800 DIODO LED SLR-56VC3F
FUSIVEL
F801 C1-461-058-002 FUS.ACAO RET.20AG 4A/250V
INDUTOR FITADO
L102 C1-479-920-034 INDUTOR 0,82UH K
L200 C1-479-908-634 INDUTOR FIXO 15UH K AXIAL
L700 C1-479-906-734 INDUTOR FIXO 2,2UH K AXIAL
L701 C1-479-906-734 INDUTOR FIXO 2,2UH K AXIAL
L805 C1-479-907-634 INDUTOR FIXO 5,6UH K AXIAL
CAP.SMD
C106 C1-490-410-410 CAP. SMD X7R 100KPF/25V K 0805
C107 C1-490-433-004 CAP.SMD NPO 33PF/50V J 0805
C108 C1-490-522-300 CAP.SMD X7R 22KPF/50V K 0805
C109 C1-490-522-300 CAP.SMD X7R 22KPF/50V K 0805
C201 C1-490-482-004 CAP.SMD NPO 82PF/50V J 0805
C202 C1-490-410-410 CAP. SMD X7R 100KPF/25V K 0805
C204 C1-490-647-405 CAP.SMD Y5V 470KPF/25V Z 0805
C205 C1-490-510-200 CAP.SMD X7R 1KPF/50V K 0805
C206 C1-490-410-410 CAP. SMD X7R 100KPF/25V K 0805
C207 C1-490-547-300 CAP.SMD X7R 47KPF/50V K 0805
C209 C1-490-522-420 CAP.SMD X7R 220KPF/16V K 0805
C212 C1-490-547-300 CAP.SMD X7R 47KPF/50V K 0805
C216 C1-490-510-300 CAP.SMD X7R 10KPF/50V K 0805
C217 C1-490-433-004 CAP.SMD NPO 33PF/50V J 0805
C220 C1-490-410-104 CAP.SMD NPO 100PF/50V J 0805
C221 C1-490-410-104 CAP.SMD NPO 100PF/50V J 0805
C222 C1-490-410-104 CAP.SMD NPO 100PF/50V J 0805
C300 C1-490-510-300 CAP.SMD X7R 10KPF/50V K 0805
C303 C1-490-510-200 CAP.SMD X7R 1KPF/50V K 0805
C305 C1-490-510-200 CAP.SMD X7R 1KPF/50V K 0805
C306 C1-490-410-410 CAP. SMD X7R 100KPF/25V K 0805
C309 C1-490-422-104 CAP.SMD NPO 220PF/50V J 0805
C310 C1-490-447-100 CAP.SMD NPO 470PF/50V K 0805
C311 C1-490-447-100 CAP.SMD NPO 470PF/50V K 0805
C400 C1-490-547-200 CAP.SMD X7R 4,7KPF/50V K 0805
C402 C1-490-522-200 CAP.SMD X7R 2,2KPF/50V K 0805
C403 C1-490-410-104 CAP.SMD NPO 100PF/50V J 0805
C410 C1-490-410-104 CAP.SMD NPO 100PF/50V J 0805
C411 C1-490-510-300 CAP.SMD X7R 10KPF/50V K 0805
C413 C1-490-510-300 CAP.SMD X7R 10KPF/50V K 0805
C426 C1-490-522-420 CAP.SMD X7R 220KPF/16V K 0805
C430 C1-490-410-410 CAP. SMD X7R 100KPF/25V K 0805
C432 C1-490-415-000 CAP SMD NPO 15PF/50V J 0805
C500 C1-490-533-200 CAP.SMD X7R 3,3KPF/50V K 0805
C501 C1-490-410-410 CAP. SMD X7R 100KPF/25V K 0805
C502 C1-490-510-300 CAP.SMD X7R 10KPF/50V K 0805
C503 C1-490-510-300 CAP.SMD X7R 10KPF/50V K 0805
C504 C1-490-510-300 CAP.SMD X7R 10KPF/50V K 0805
C512 C1-490-510-200 CAP.SMD X7R 1KPF/50V K 0805
C600 C1-490-522-300 CAP.SMD X7R 22KPF/50V K 0805
C610 C1-490-410-410 CAP. SMD X7R 100KPF/25V K 0805
C611 C1-490-410-410 CAP. SMD X7R 100KPF/25V K 0805
C614 C1-490-410-410 CAP. SMD X7R 100KPF/25V K 0805
C617 C1-490-512-400 CAP.SMD X7R 120KPF/50V K 0805
C618 C1-490-515-300 CAP.SMD X7R 15KPF/50V K 0805
C619 C1-490-410-410 CAP. SMD X7R 100KPF/25V K 0805
C621 C1-490-512-400 CAP.SMD X7R 120KPF/50V K 0805
C626 C1-490-522-200 CAP.SMD X7R 2,2KPF/50V K 0805
C635 C1-490-547-303 CAP.SMD X7R 47KPF/25V K 0805
C637 C1-490-410-410 CAP. SMD X7R 100KPF/25V K 0805
C644 C1-490-410-410 CAP. SMD X7R 100KPF/25V K 0805
C645 C1-490-422-104 CAP.SMD NPO 220PF/50V J 0805
C649 C1-490-647-405 CAP.SMD Y5V 470KPF/25V Z 0805
R902 C1-183-615-219 RES.COMPOS.1/2W 1,5K 5% N
R903 C1-183-547-092 RES.METAL FILME 1/2W 47R 5% N
R904 C1-185-510-440 RES.METAL FILME 1W 100K 5%
R905 C1-183-518-292 RES.METAL FILME 1/2W 1,8K 5% N
R906 C1-183-516-292 RES.METAL FILME 1/2W 1,6K 5% N
R908 C1-183-615-219 RES.COMPOS.1/2W 1,5K 5% N
R909 C1-183-547-092 RES.METAL FILME 1/2W 47R 5% N
R910 C1-185-510-440 RES.METAL FILME 1W 100K 5%
REF. NOPART NO.KANRIDESCRIPTION
R911 C1-183-516-292 RES.METAL FILME 1/2W 1,6K 5% N
R912 C1-183-518-292 RES.METAL FILME 1/2W 1,8K 5% N
R914 C1-183-615-219 RES.COMPOS.1/2W 1,5K 5% N
R915 C1-183-547-092 RES.METAL FILME 1/2W 47R 5% N
R916 C1-185-510-440 RES.METAL FILME 1W 100K 5%
R917 C1-183-516-292 RES.METAL FILME 1/2W 1,6K 5% N
R918 C1-183-518-292 RES.METAL FILME 1/2W 1,8K 5% N
R920 C1-183-510-292 RES.METAL FILME 1/2W 1K 5% N
CAP.CERAM
C901 C1-363-102-803 C.C.D.Y5P 1KPF/2KV K 6LS
C903 C1-363-471-600 C.C.D.Y5P/Y5E 470PF>=500V K
C905 C1-361-150-300 C.C.D.N220 15PF>=50V K
C906 C1-363-471-600 C.C.D.Y5P/Y5E 470PF>=500V K
C908 C1-360-470-301 C.C.D.NPO 47PF>=50V K
C909 C1-361-150-300 C.C.D.N220 15PF>=50V K
C910 C1-363-471-600 C.C.D.Y5P/Y5E 470PF>=500V K
C912 C1-361-150-300 C.C.D.N220 15PF>=50V K