LFE-8139HTX v.1.3
Half-Sized PCI Fast Ethernet Adapter
· Microsoft WHQL compliant, automatic installation for Win2000 and WinXP.
· Boot ROM socket for optional remote booting
· Supports 32-bit PCI Local Bus master for high throughput and low processor utilization
· Complies with the Ethernet/IEEE 802.3u 100BASE-TX and 10 BASE-T industry standard
· Plug and Play: Simply insert the card into a PC and it will automatically be configuration by the
PC BIOS
· Supports full-duplex operations, thus doubles the network speed up to 20Mbps at 10BASE-T
Ethernet or 200Mbps at 100BASE-TX Fast Ethernet. Furthermore, the flow-control technology
minimizes packet fragments when buffer is full
· Support 802.1p COS
· Single LED indicators to report network status
· One RJ-45 connector with Auto-sense of cable type of 10 or 100Mpbs network operation
· Supports wide PCI clock speed from 16.75 to 40 MHz, capable of zero wait state
· Extensive use of VLSI component that integrated Fast Ethernet MAC, Physical chip and
transceiver in one chip to provide high hardware reliability, small power consumption and
reduced network interface card size
· Provides a comprehensive setup program for displaying the adapter configuration, and
including diagnostics on board or on network test
Specification
Supported Computers: 486, Pentium or above
· Boot ROM socket for optional remote booting
Standard Compliant:
· IEEE 802.3 10BASE-T
· IEEE 802.3u 100BASE-TX
· Bus Type: 32-bit PCI Bus Master
Transmission Speed:
· IEEE 802.3u Auto-Negotiation for automatic speed selection
· 10Mbps (ordinary Ethernet)
· 20Mbps (full-duplex Ethernet)
· 100Mbps (ordinary Fast Ethernet)
· 200Mbps (full-duplex Fast Ethernet)
LED Indicator:
· Link/Tx/Rx (Link/Transmit/Receive)
Operating Temperature: 32 ~ 131 degrees *F (0 ~ 55 degrees *C)
Storage Temperature: -4 ~ 176 degrees *F (-20 ~ 80 degrees *C)
Humidity: 10 ~ 90% RH non-condensing
Operating Voltage: +5V* 5% @500mA maximum
Ordering Information
LFE-8139HTX Half-Sized PCI Fast Ethernet Adapter